Study on Impulse-discharge Driven Abrasive Flow Assisted Grinding of Monocrystalline SiC

doi:10.3901/JME.2024.09.383

Abstract

Abstract: The surface quality of monocrystalline SiC, as a semiconductor material, influences its electrical, magnetic, and optical performance. However, during mechanical processing, the cutting depth and the mechanical runout lead to unstable cutting force, resulting in surface micro-burr, modified layer, subsurface residual stress and damage. Thus, an impulse-discharge between wheel metal and SiC is proposed in diamond grinding to drive a loose-abrasive flow. It aims to investigate the mechanism by which the hybrid effects of mechanical processing, abrasive flow polishing, and thermochemical removal influence surface integrity. The surface formation is first modelled in relation to impulse discharge energy and hydrodynamic pressure. Then, the material removal rate and abrasive wear rate are investigated. Finally, the surface integrity is investigated. It is shown that the hybrid machined formation chain was formed in the abrasive-workpiece interface. The impulse-discharge drove the loose-abrasive and modified the interface by thermochemical modification. The loose-abrasive obtained a removal force to eliminate the modified SiO2 and expose the SiC substrate. Decreasing the impulse-discharge energy and hydrodynamic pressure promoted brittle removal to ductile removal. Under the mechanical vibrations generated by large cutting depths and spindle runout, the hybrid machining of impulse-discharge driven thermochemical modification and loose-abrasive polishing, in conjunction with diamond grinding, could effectively reduce residual compressive stress, surface micro-burrs, and subsurface damage layer thickness by 93%, 73%, and 50%, respectively.

Key words: surface damage, residual stress, 4H-SiC, impulse-discharge, abrasive flow

CLC Number:

TN305

CHEN Zhaojie, XIE Jin, LIU Junhan, XIONG Changxin, LI Difan. Study on Impulse-discharge Driven Abrasive Flow Assisted Grinding of Monocrystalline SiC[J]. Journal of Mechanical Engineering, 2024, 60(9): 383-392.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2024.09.383

http://www.cjmenet.com.cn/EN/Y2024/V60/I9/383

References

[1] 刘基业，郑泽东，李驰，等. 电压自平衡碳化硅MOSFET间接串联功率模块[J]. 电工技术学报，2023，38(7)：1900-1909. LIU Jiye，ZHENG Zedong，LI Chi，et al. An indirect series-connected SiC MOSFET power module with voltage self-balance[J]. Transactions of China Electrotechnical Society，2023，38(7)：1900-1909.
[2] 盛天宇，李健，李鸿昌，等. 光纤法珀式SiC耐高温压力传感器的制造与测试[J]. 中国机械工程，2022，33 (15)：1803-1809. SHENG Tianyu，LI Jian，LI Hongchang，et al. Fabrication and measurement of sic fiber-optic fabry-perot pressure sensors for high-temperature applications[J]. China Mechanical Engineering，2022，33 (15)：1803-1809.
[3] 张俊杰，张建国，闫永达，等. 面向材料的超精密金刚石切削加工机理[J]. 中国科学：技术科学，2022，52 (6)：854-870. ZHANG Junjie，ZHANG Jianguo，YAN Yongda，et al. Mechanisms of material-oriented ultraprecision diamond cutting[J]. SCIENTIA SINICA Technologica，2022，52 (6)：854-870.
[4] 段念，黄身桂，于怡青，等. 不同圆角半径金刚石划擦单晶SiC过程中的材料去除机理研究[J]. 机械工程学报，2017，53(15)：171-180. DUAN Nian，HUANG Shengui，YU Yiqing，et al. The material removal mechanism of monocrystal sic scratching by single diamond grit with different tip radius[J]. Journal of Mechanical Engineering，2017，53(15)：171-180.
[5] 徐思佳，于颜豪，陈岐岱. 基于水辅助的飞秒激光碳化硅微孔加工(特邀)[J]. 光子学报，2021，50(6)：74-78. XU Sijia，YU Yanhao，CHEN Qidai. Water-assisted femtosecond laser silicon carbide micro-hole machining (invited) [J]. Acta Photonica Sinica，2021，50(6)：74-78.
[6] GUAN J，ZHAO Y. Non-contact grinding/thinning of silicon carbide wafer by pure EDM using a rotary cup wheel electrode[J]. Precision Engineering，2022，74：209-223.
[7] 宋力，顿爱欢，王哲，等. 大气等离子体电极结构对碳化硅去除函数的影响[J]. 中国激光，2020，47 (10)：45-53. SONG Li，DUN Aihuan，WANG Zhe，et al. Effects of atmospheric pressure plasma electrode structure on silicon carbide removal function[J]. Chinese Journal of Lasers，2020，47 (10)：45-53.
[8] LI J，GENG D，ZHANG D，et al. Ultrasonic vibration mill-grinding of single-crystal silicon carbide for pressure sensor diaphragms[J]. Ceramics International，2018，44(3)：3107-3112.
[9] 郝晓丽，苑泽伟，温泉，等. 超声振动辅助研磨单晶碳化硅晶片工艺研究[J]. 金刚石与磨料磨具工程，2022，42(3)：268-274. HAO Xiaoli，YUAN Zewei，WEN Quan，et al. Process research on ultrasonic vibration assisted lapping of single crystal silicon carbide[J]. Diamond & Abrasives Engineering，2022，42 (3)：268-274.
[10] YAN J，TAN T H. Sintered diamond as a hybrid EDM and grinding tool for the micromachining of single-crystal SiC[J]. CIRP Annals，2015，64 (1)：221-224.
[11] CHEN Z，ZHAN S，ZHAO Y. Electrochemical jet-assisted precision grinding of single-crystal SiC using soft abrasive wheel[J]. International Journal of Mechanical Sciences，2021，195：106239.
[12] 于磊，杨双宁，刘学青，等. 离子束刻蚀辅助飞秒激光加工制备碳化硅微光学元件[J]. 光子学报，2018，47 (12)：51-56. YU Lei，YANG Shuangning，LIU Xueqing，et al. Ion beam etching assisted femtosecond laser machining to manufacture silicon carbide micro-optical components[J]. Acta Photonica Sinica，2018，47(12)：51-56.
[13] 李敏，袁巨龙，吕冰海. 剪切增稠抛光磨料液的制备及其抛光特性[J]. 光学精密工程，2015，23(9)：2513-2521. LI Min，YUAN Julong，LÜ Binghai. Preparation of shear thickening polishing abrasive slurries and their polishing properties[J]. Optics and Precision Engineering，2015，23(9)：2513-2521.
[14] 王振忠，施晨淳，张鹏飞，等. 先进光学制造技术最新进展[J]. 机械工程学报，2021，57(8)：23-56. WANG Zhenzhong，SHI Chenchun，ZHANG Pengfei，et al. Recent progress of advanced optical manufacturing technology[J]. Journal of Mechanical Engineering，2021，57(8)：23-56.
[15] 段世祥，吕冰海，邓乾发. 磨粒类型对K9玻璃剪切增稠抛光的影响[J]. 表面技术，2022，51(11)：337-346，384. DUAN Shixiang，LÜ Binghai，DENG Qianfa. Effect of abrasive type on shear thickening polishing of K9 glass[J]. Surface Technology，2022，51(11)：337-346，384.
[16] 邵琦，邵蓝樱，吕冰海，等. 基于田口法的石英玻璃剪切增稠抛光工艺参数优化[J]. 表面技术，2021，50(12)：85-93. SHAO Qi，SHAO Lanying，LÜ Binghai，et al. Parameter optimization by Taguchi method for shear thickening polishing process of quartz glass[J]. Surface Technology，2021，50(12)：85-93.
[17] 周强，田业冰，于宏林，等. 超粗糙氧化锆复合陶瓷磁性剪切增稠光整加工特性[J]. 材料导报，2021，35(S2)：97-100. ZHOU Qiang，TIAN Yebing，YU Honglin，et al. Magnetic shear thickening finishing characteristics of ultra-rough ZrO₂ composite ceramics[J]. Materials Reports，2021，35(S2)：97-100.
[18] KANG Y ，QIU Y ，LEI Z ，et al. An application of Raman spectroscopy on the measurement of residual stress in porous silicon[J]. Optics& Lasers in Engineering，2005，43(8)：847-855.