Motion Accuracy Analysis of an Asymmetric Stewart Mechanism

doi:10.3901/JME.2024.23.063

Abstract

Abstract: The motion accuracy of a 4/2 type Stewart mechanism has been analyzed. It establishes an error model for the mechanism that takes into account bearing clearance and dimensional errors in the driving branches. The spatial distribution of pose errors of the moving platform is investigated. Sensitivity analysis of various error components in the mechanism is carried out based on the error model. Methods for determining the precision of each joint while satisfying the motion accuracy requirements of the moving platform are provided. Additionally, two precision synthesis approaches,namely sensitivity-Monte Carlo method and genetic algorithm-based method, are presented. The paper develops a static stiffness model for the mechanism, considering the combined effects of joint errors and structural deformations under different operational conditions. Comparative analysis with conventional Stewart mechanisms demonstrates its suitability for pitch conditions.The findings have significant implications for future research in precision synthesis of parallel mechanisms.

Key words: error model, sensitivity, Monte Carlo method, genetic algorithm, precision comprehensive, stiffness

CLC Number:

TP242

LIU Xiaofei, GUO Mengtao, WAN Bo, CHEN Ran, ZHAO Yongsheng. Motion Accuracy Analysis of an Asymmetric Stewart Mechanism[J]. Journal of Mechanical Engineering, 2024, 60(23): 63-75.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2024.23.063

http://www.cjmenet.com.cn/EN/Y2024/V60/I23/63

References

[1] ZHANG Xing，YANG Mingxing，MU Dejun，et al. Unified formulas of constrained Jacobian and Hessianmatrices for 3T1R overconstrained parallel mechanisms[J]. Mechanics Based Design of Structures and Machines，2023，51(3)：5-8.
[2] 潘国威，陈文亮，王珉. 应用于飞机装配的并联机构技术发展综述[J]. 航空学报，2019，40(1)：272-288. PAN Guowei，CHEN Wenliang，WANG Min. Review on the development of parallel mechanism technology for aircraft assembly[J]. Acta Aeronautica Sinica，2019，40(1)：272-288.
[3] 贾雨璇，谢哲东. 并联机构的发展及应用领域的概述[J].农业与技术，2016，36(7)：57-58. JIA Yuxuan，XIE Zhedong. Development and application of parallel mechanism[J]. Agriculture and Technology，2016，36(7)：57-58.
[4] SRIRAM K，LYONS T G，WANG Y T. Anomalies due to delay and loss in AAL2 packetvoice systems：Performance models and methods of mitigation[J]. IEEE Journal on Selected Areas in Communications，1999，17(1)：4-17.
[5] YE W， LI Q， CHAI X. New family of 3-DOF up-equivalent parallel mechanisms with high rotational capability[J]. Chinese Journal of Mechanical Engineering，2018，31(1)：66-77.
[6] 刘得军，车仁生，叶东，等. 三自由度并联机构坐标测量机误差建模与仿真[J]. 中国机械工程，2001，5(7)：32-35. LIU Dejun，CHE Rensheng，YE Dong，et al. Error modeling and simulation of three-degree-of-freedom parallel mechanism coordinate measuring machine[J]. China Mechanical Engineering，2001，5(7)：32-35.
[7] HU Shenghai，LIU Xiulian，SUN Junchao，et al. Error modeling and simulation of serial-parallel mechanism based on screw theory[J]. Applied Mechanics and Materials，2014，87(7)：62-75.
[8] NATH G，DEVI A. Propagation of shock wave in a non-ideal dusty gas in rotating medium using Lie group theoretic method：Isothermal flow[J]. International Journal of Geometric Methods in Modern Physics，2022，19(11)：14-35.
[9] DU Xu，WANG Bin，ZHENG Junqiang. Geometric error analysis of a 2UPR-RPU over-constrained parallel manipulator[J]. Machines，2022，10(11)：990-990.
[10] SARSWATI S，RANDHEER S. Evolution of singular surface and interaction with a strong shock in reacting polytropic gases using Lie group theory[J]. International Journal of Non-Linear Mechanics，2019，19(21)：90-99.
[11] 郭盛，王乃玥，方跃法，等. 基于概率分布的3-UPU机构误差影响灵敏度[J]. 机械工程学报，2011，47(21)：14-21. GUO Sheng，WANG Naiyue，FANG Yuefa，et al. Error Influence sensitivity of 3-UPU mechanism based on probability distribution[J]. Journal of Mechanical Engineering，2011，47(21)：14-21.
[12] 谢瑞煜，赵建军，蒋涛. 基于蒙特卡洛法的武器系统标定误差分析[J]. 兵器装备工程学报，2019，40(1)：130-134. XIE Ruiyu，ZHAO Jianjun，JIANG Tao. Error analysis of weapon system calibration based on monte carlo method[J]. Journal of Ordnance Equipment Engineering，2019，40(1)：130-134.
[13] 康件丽，陈国强，赵俊伟. 基于蒙特卡洛方法的3-PRS并联机器人误差分析[J]. 机械设计与制造，2014，45(6)：242-245. KANG Jian，CHEN Guoqiang，ZHAO Junwei. Error analysis of 3-PRS parallel robot based on monte carlo method[J]. Machine Design & Build，2014，45(6)：242-245.
[14] CAI Zhenning，LU Jianfeng，YANG Siyao. Numerical analysis for inchworm monte carlo method：sign problem and error growth[J]. Mathematics of Computation，2023，92(341)：22-45.
[15] KRALJ L，LENSAI H. Wavelet analysis of laser doppler microcirculatory signals：current applications and limitations[J]. Frontiers in Physiology，2023，13(21)：56-86.
[16] CAI Yuxin，ZHU Zeqi，XUE Qi，et al. Does bitcoin hedge against the economic policy uncertainty：based on the continuous wavelet analysis[J]. Journal of Applied Economics，2022，25(1)：3-15.
[17] MATTEO R，SAIOA H，OSCAR A，et al. Kinematic analysis and multi-objective optimization of a 3-UPR parallel mechanism for a robotic leg[J]. Mechanism and Machine Theory，2018，120(23)：192-202.
[18] DING Jianzhong，DONG Yang，LIU Xueao，et al. Sensitivity analysis and accuracy synthesis of a deployable antenna considering clearances and link tolerances[J]. Mechanisms Robotics，2022，5(31)：23-45.
[19] WANG J S，WU C，LIU X J. Performance evaluation of parallel manipulators：motion/force transmissibility and its index[J]. Mechanism and Machine Theory，2010，45(10)：1462-1476.
[20] 朱超，孙载超，张俊. 2UPS&UPR&UP型并联机器人精度综合[J]. 机械传动，2023，47(1)：11-16. ZHU Chao，SUN Zaichao，ZHANG Jun. Accuracy synthesis of 2UPS&UPR&UP parallel robot[J]. Mechanical Transmission， 2023， 47(1)：11-16.
[21] 周萱影，王正明，李冬，等. 线性模型的海基制导系统误差分离方法性能分析[J]. 国防科技大学学报，2019，41(3)：179-186. ZHOU Xuanying，WANG Zhengming，LI Dong，et al. Performance analysis of error separation method for sea-based guidance system based on linear model[J]. Journal of National University of Defense Technology，2019，41(3)：179-186.
[22] WANG C，XU C，LI L，et al. Design and kinematics analysis of the executing device of heavy-duty casting robot[J]. International Journal of Advanced Robotic Systems，2020，17(1)：1-9.
[23] 谢嘉，吴家桢，李永国，等. 改进粒子群优化算法在机械臂轨迹规划中的应用[J]. 机械科学与技术，2005，11(23)：75-99. XIE Jia，WU Jiazhen，LI Yongguo，et al. Application of improved particle swarm optimization in trajectory planning of manipulator[J]. Mechanical Science and Technology for Aerospace Engineering，2005，11(23)：75-99.
[24] 郑亚青，刘雄伟. 基于遗传算法的平面并联机构运动学设计[J]. 机械设计，2003，67(5)：37-39. ZHENG Yaqing，LIU Xiongwei. Kinematic design of planar parallel mechanism based on genetic algorithm[J]. Journal of Machine Design，2003，67(5)：37-39.
[25] GUO Yang，FANG Lijin，DONG Bin，et al. Analysis of pose error of a novel 4-DOF parallel robot[J]. Mechanical Science and Technology，2001，20(6)：869-871.
[26] MIKHAEL Tannousa，STPHANE Carob. Sensitivity analysis of parallel manipulators U-sing an interval linearization method[J]. Mechanism and Machine Theory，2014，71(11)：93-114.
[27] 祃琳，黄田，王洋，等. 面向制造的并联机床精度设计[J]. 中国机械工程，1999， 10(10) ：1114-1118． MA Lin，HUANG Tian，WANG Yang，et al. Precision design for manufacturing parallel machine tools[J]. China Mechanical Engineering，1999，10(10)：1114-1118.
[28] WU Mengli，YUE Xianqu，CHEN Weibin，et al. Accuracy analysis and synthesis of asymmetric parallel mechanism based on Sobol-QMC[J]. Proceedings of the Institution of Mechanical Engineers，Part C：Journal of Mechanical Engineering Science，2020，234(21)：23-45.
[29] BRIOT S，BONEY I A. Accuracy analysis of 3-DOF planar parallelrobots[J]. Mechanism and Machine Theory，2008，43(4)：448-452.
[30] 王娜，张涛，王秋红. 3UPS-PU并联机构的运动学误差建模与验证[J]. 机械传动，2020，44(7)：113-118. WANG Na，ZHANG Tao，WANG Qiuhong. Kinematic error modeling and verification of 3UPS-PU parallel mechanism[J]. Journal of Mechanical Transmission，2019，44(7)：113-118.
[31] BU Jianjun，WANG Xingbo. ADAMS modeling and dynamics simulation of mosaic particle’s motion state[P]. Proceedings of the 21st International Conference on Industrial Engineering and Engineering Management，2014，35(23)：42-57.
[32] 戎新萍，徐海璐，韩雪，等. 基于MATLAB和ADAMS联合仿真的工业机器人建模[J]. 制造业自动化，2022，44(7)：28-30. RONG Xinping，XU Hailu，HAN Xue，et al. Modeling of industrial robot based on MATLAB and ADAMS co-simulation[J]. Manufacturing Automation，2002，44(7)：28-30
[33] 刘晓飞，刘洋，何阳，等. 2RPU+2UPR+RPR多冗余驱动并联机构运动学分析与尺度优化[J]. 农业机械学报，2023，54(3)：1-25. LIU Xiaofei，LIU Yang，HE Yang，et al. Kinematic analysis and dimension optimization of multi-redundantly actuated parallel mechanism 2RPU+2UPR+RPR[J]. Transactions of the Chinese Society for Agricultural Machinery，2023，54(3)：1-25.
[34] LI Jianguang，DING Jian，YAO Yingxu，et al. Forward-kinematics-based approaches for pose accuracy of docking mechanism with joint clearance[J]. Transactions of Nanjing University of Aeronautics and Astronautics，2015，32(4)：366-370.
[35] 洪林. 并联机器人精度分析与综合研究[D]. 天津大学，2004，33(13)：23-30. HONG Lin. Precision analysis and comprehensive research of parallel robot[D]. Tianjin University，2004，33(13)：23-30.
[36] SUN Tao，SONG Yimin，XU Liang. Accuracy synthesis of a 3-PRS parallel manipulator based on genetic algorithms[J]. Advanced Materials Research，2010，905(3)：97-101.
[37] LU Qiang，ZHANG Youliang. The accuracy synthesis of 6-leg parallel machine tool is carried out by Monte Carlo method[J]. China Mechanical Engineering，2002，39(6)：20-23.
[38] 谭爽，王小勇，林喆，等. 六自由度并联机构位姿调整灵敏度分析[J]. 航天返回与遥感，2015，36(3)：78-85. TAN Shuang，WANG Xiaoyong，LIN Zhe，et al. Sensitivity analysis of pose adjustment of 6-DOF parallel mechanism[J]. Aerospace Return and Remote Sensing，2015，36(3)：78-85.
[39] 崔鑫磊，李威. 基于蒙特卡洛模拟的6-UPS并联机构的误差分析[J]. 机械设计与制造，2016，6(6)：86-92. CUI Xinlei，LI Wei. Error analysis of 6-UPS parallel mechanism based on monte carlo simulation[J]. Machine Design & Manufacture，2016，6(6)：86-92.
[40] ALLEN M S，SRACIC M W. A new method for processing impactexcited continuos-scan laser doppler vibrometer measurements[J]. Mechanical Systems and Signal Processing，2010，24(3)：721-735.
[41] WANG Zhanzhou，CAO Lihua，SI Heyong. An improved genetic algorithm for determining the optimal operation strategy of thermal energy storage tank in combined heat and power units[J]. Journal of Energy Storage，2021，43(24)：2-5.