Additive Manufacturing of Co-based Alloy/copper Interface Interlocking Structures with a New Vibration-assisted Powder Delivery System

doi:10.3901/JME.2024.23.278

Abstract

Abstract: In the process of multi-material laser powder bed fusion (LPBF), a high-quality powder delivery is critical for the stability of the LPBF process and enhancing the quality of parts. A new type of ultrasonic vibration-assisted powder delivery system is designed. The frequency characteristics of the vibration-assisted module and the effect of needle diameter on powder dropping are investigated. A needle with a size of 0.3 mm is demonstrated to achieve the stale and well powder delivery. Three types of Co-based alloy/copper multi-material parts with different interlocking structures (i.e., sawtooth, sine, and rectangle) are fabricated by LPBF using the ultrasonic vibration-assisted powder delivery system, demonstrating the feasibility of the powder delivery system. Subsequently, the interface characteristics of three types of multi-material parts are investigated to analyze the macroscopic morphology, defects and the element distribution at the interface. The results show that the powder can be delivered stably with a frequency of 21 kHz by the vibration-assisted module. A mixing area of two materials are found at the interface of the multi-material parts. The forming quality of the sawtooth-shaped interlocking structure is higher than that of the sine- and rectangle- shaped interlocking structures, which showing a good interfacial bonding. The results may provide reference for the design of the powder delivery system and the metal multi-material interface structure.

Key words: laser powder bed fusion, multi-material, powder delivery, interlocking structure

CLC Number:

TG665

TANG Jinrong, WANG Di, LIU Linqing, TAN Hua, LI Yang, ZHOU Wei, CHEN Guoxing, YANG Yongqiang. Additive Manufacturing of Co-based Alloy/copper Interface Interlocking Structures with a New Vibration-assisted Powder Delivery System[J]. Journal of Mechanical Engineering, 2024, 60(23): 278-293.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2024.23.278

http://www.cjmenet.com.cn/EN/Y2024/V60/I23/278

References

[1] WANG Di，DENG Guowei，YANG Yongqiang，et al. Research progress on additive manufacturing of metallic heterogeneous materials[J]. Journal of Mechanical Engineering，2021，57(1)：186.
[2] MARQUES A，CUNHA Â，GASIK M，et al. Inconel 718–copper parts fabricated by 3D multi-material laser powder bed fusion： a novel technological and designing approach for rocket engine[J]. The international journal of advanced manufacturing technology，2022，122(3–4)：2113-2123.
[3] WEI C，SUN Z，CHEN Q，et al. Additive manufacturing of horizontal and 3d functionally graded 316l/cu10sn components via multiple material selective laser melting[J]. Journal of Manufacturing Science and Engineering，2019，141(8)：081014.
[4] BARTOLOMEU F，COSTA M M，ALVES N，et al. Additive manufacturing of niti-ti6al4v multi-material cellular structures targeting orthopedic implants[J]. Optics and Lasers in Engineering，2020，134：106208.
[5] WITS W W，AMSTERDAM E. Graded structures by multi-material mixing in laser powder bed fusion[J]. CIRP Annals，2021，70(1)：159-162.
[6] 刘芳,刘常升,陶兴启，等. 结晶器铜板上激光熔覆镍基合金[J]. 东北大学学报，2006(10)：1106-1109. LIU Fang，LIU Changsheng，TAO Xingqi，er al. Ni-based alloy cladding on cpooer crystallizer surface by laser[J]. Journal of Northeastern University,2006(10)：1106-1109
[7] XIAO Y，SUN C，WU X，et al. Restoration of pure copper motor commutator for aviation by laser powder deposition[J]. Journal of Materials Research and Technology，2023，23：5796-5806.
[8] 李胜鑫. 铜钢熔敷焊接特点及其缺陷控制[J]. 电焊机，2013，43(6)：56-58，98. LI Shengxin. Characteristics and defects control of copper and steel re-melt deposit welding[J]. Electric Welding Machine，2013，43(6)： 56-58，98.
[9] DOLEV O，OSOVSKI S，SHIRIZLY A. Ti-6al-4v hybrid structure mechanical properties—wrought and additive manufactured powder-bed material[J]. Additive Manufacturing，2021，37：101657.
[10] CHEN J，YANG Y，SONG C，et al. Interfacial microstructure and mechanical properties of 316l /cusn10 multi-material bimetallic structure fabricated by selective laser melting[J]. Materials Science and Engineering： A，2019，752： 75-85.
[11] BAI Y，ZHANG J，ZHAO C，et al. Dual interfacial characterization and property in multi-material selective laser melting of 316L stainless steel and C52400 copper alloy[J]. Materials Characterization，2020，167：110489.
[12] WANG D，LIU L，DENG G，et al. Recent progress on additive manufacturing of multi-material structures with laser powder bed fusion[J]. Virtual and Physical Prototyping，2022，17(2)：329-365.
[13] AL-JAMAL O M，HINDUJA S，LI L. Characteristics of the bond in cu–h13 tool steel parts fabricated using SLM[J]. CIRP Annals，2008，57(1)：239-242.
[14] ZHANG X，WEI C，CHUEH Y H，et al. An integrated dual ultrasonic selective powder dispensing platform for three-dimensional printing of multiple material metal/glass objects in selective laser melting[J]. Journal of Manufacturing Science and Engineering，2019，141(1)： 011003.
[15] YUAN Y，YU K，ZHU H，et al. Continuous delivery of powders with vibration and pneumatic pressure assistance for laser-based additive manufacturing processes[J]. Journal of Manufacturing Processes，2022，82：336-346.
[16] WU H，PRITCHET D，WOLFF S，et al. A vibration-assisted powder delivery system for additive manufacturing - an experimental investigation -[J]. Additive Manufacturing，2020，34：101170.
[17] SING S L，LAM L P，ZHANG D Q，et al. Interfacial characterization of SLM parts in multi-material processing： Intermetallic phase formation between AlSi10Mg and C18400 copper alloy[J]. Materials Characterization，2015，107：220-227.
[18] WEI C，GU H，GU Y，et al. Abnormal interfacial bonding mechanisms of multi-material additive-manufactured tungsten–stainless steel sandwich structure[J]. International Journal of Extreme Manufacturing，2022，4(2)： 025002.
[19] CHEN J，YANG Y，WANG D，et al. Effect of manufacturing steps on the interfacial defects of laser powder bed fusion 316L/CuSn10[J]. Materials Letters，2021，292： 129377.
[20] WEI C，LIU L，GU Y，et al. Multi-material additive-manufacturing of tungsten - copper alloy bimetallic structure with a stainless-steel interlayer and associated bonding mechanisms[J]. Additive Manufacturing，2022，50：102574.
[21] CHEN K，WANG C，HONG Q，et al. Selective laser melting 316L/CuSn10 multi-materials：processing optimization，interfacial characterization and mechanical property[J]. Journal of Materials Processing Technology，2020，283：116701.
[22] VERMA S，YANG C K，LIN C H，et al. Additive manufacturing of lattice structures for high strength mechanical interlocking of metal and resin during injection molding[J]. Additive Manufacturing，2022，49： 102463.
[23] CHUEH Y H，WEI C，ZHANG X，et al. Integrated laser-based powder bed fusion and fused filament fabrication for three-dimensional printing of hybrid metal/polymer objects[J]. Additive Manufacturing，2020，31：100928.
[24] TANG S H，CHENG C W，YEH R Y，et al. Direct joining of 3D-printed thermoplastic parts to SLM-fabricated metal cellular structures by ultrasonic welding[J]. The International Journal of Advanced Manufacturing Technology，2018，99(1–4)：729-736.
[25] KELLY C N，WANG T，CROWLEY J，et al. High-strength，porous additively manufactured implants with optimized mechanical osseointegration[J]. Biomaterials，2021，279： 121206.
[26] 林书玉. 超声换能器的原理及设计[M]. 北京：科学出版社， 2004. LIN Shuyu. The principle and design of ultrasonic transducers[M]. Beijing：Science Press，2004.
[27] HARKNESS P，CARDONI A，RUSSELL J，et al. Designing a hollow langevin transducer for ultrasonic coring[J]. Applied Mechanics and Materials，2010，24-25： 65-70.
[28] ZHANG Guoqing，YANG Yongqiang，SONG Changhui，et al. Study on biocompatibility of cocrmo alloy parts manufactured by selective laser melting[J]. Journal of Medical and Biological Engineering，2018，38(1)： 76-86.
[29] CHEN J，YANG Y，BAI Y，et al. Single and multiple track formation mechanism of laser powder bed fusion 316L/CuSn10 multi-material[J]. Materials Characterization，2022，183：111654.
[30] CHEN J，YANG Y，SONG C，et al. Influence mechanism of process parameters on the interfacial characterization of selective laser melting 316L/CuSn10[J]. Materials Science and Engineering： A，2020，792：139316.
[31] LIU L，WANG D，YANG Y，et al. Effect of scanning strategies on the microstructure and mechanical properties of inconel 718 alloy fabricated by laser powder bed fusion[J]. Advanced Engineering Materials，2023，25(5)：2200492.
[32] CAO L. Mesoscopic-scale simulation of pore evolution during laser powder bed fusion process[J]. Computational Materials Science，2020，179：109686.
[33] WANG W，NING J，LIANG S Y. Analytical prediction of keyhole porosity in laser powder bed fusion[J]. The International Journal of Advanced Manufacturing Technology，2022，119(11–12)：6995-7002.
[34] NING J，WANG W，ZAMORANO B，et al. Analytical modeling of lack-of-fusion porosity in metal additive manufacturing[J]. Applied Physics A，2019，125(11)： 797.
[35] MUGWAGWA L，YADROITSAVA I，MAKOANA N W，et al. Residual stress in laser powder bed fusion[M]// Fundamentals of Laser Powder Bed Fusion of Metals. Elsevier，2021： 245-276.
[36] ZHANG Z，ZHAO X，TSUREKAWA S. Diffusion in copper/cobalt systems under high magnetic fields[J]. Materials，2021，14(11)：3104.
[37] SENTHILNATHAN N，RAJA ANNAMALAI A，VENKATACHALAM G. Effect of cobalt addition on the morphology and mechanical properties of W–Ni–Cu–Co alloy[J]. Emerging Materials Research，2019，8(4)： 558-566.
[38] ZURIGUEL I，GARCIMARTÍN A，MAZA D，et al. Jamming during the discharge of granular matter from a silo[J]. Physical Review E，2005，71(5)：051303.
[39] SINGH A，KAPIL S，DAS M. A comprehensive review of the methods and mechanisms for powder feedstock handling in directed energy deposition[J]. Additive Manufacturing，2020，35：101388.
[40] PANWISAWAS C，TANG Y T，REED R C. Metal 3D printing as a disruptive technology for superalloys[J]. Nature Communications，2020，11(1)：2327.
[41] GOKCEKAYA O，ISHIMOTO T，TODO T，et al. Effect of scan length on densification and crystallographic texture formation of pure chromium fabricated by laser powder bed fusion[J]. Crystals，2020，11(1)：9.
[42] YEUNG H，LANE B. A residual heat compensation based scan strategy for powder bed fusion additive manufacturing[J]. Manufacturing Letters，2020，25： 56-59.
[43] YAN H，WANG A，XU K，et al. Microstructure and interfacial evaluation of Co-based alloy coating on copper by pulsed Nd： YAG multilayer laser cladding[J]. Journal of Alloys and Compounds，2010，505(2)： 645-653.
[44] XIE Z，ZHANG C，WANG R，et al. Microstructure and wear resistance of WC/Co-based coating on copper by plasma cladding[J]. Journal of Materials Research and Technology，2021，15：821-833.
[45] CHEN S，LIANG J，LIU C，et al. Preparation of a novel Ni/Co-based alloy gradient coating on surface of the crystallizer copper alloy by laser[J]. Applied Surface Science，2011，258(4)：1443-1450.