Stress-free Manufacturing Technology

doi:10.3901/JME.2020.08.113

Abstract

Abstract: The generation of residual stress and its influence on mechanical component performance are summarized from the perspective of no-stress manufacturing technology, and the important theoretical and practical significance of studying the determination and regulation of residual stress distribution for guaranteeing production, stabilizing product quality and prolonging product life are analyzed. According to different measurement methods and relief methods of residual stress, the definition, function and significance of stress-free manufacturing technology are given, as well as graphical symbol representations of residual stress of mechanical component, including residual stress gradient, distribution uniformity and 2D distribution. In the end, the structure of stress-free manufacturing technology system and the logical relation between them are given. The future development of stress-free manufacturing technology and the promotion of machining and manufacturing are prospected.

Key words: residual stress, non-destructive testing, regulation, stress-free manufacturing

CLC Number:

TG156

XU Chunguang, LI Peilu. Stress-free Manufacturing Technology[J]. Journal of Mechanical Engineering, 2020, 56(8): 113-132.

References

[1] WYATT J E,BERRY J T,WILLIAMS A R. Residual stresses in aluminum castings[J]. Journal of Materials Processing Technology,2007(191):170-173.
[2] WITHERS P J,BHADESHIA H K. Residual stress Part 1-Measurement techniques[J]. Materials Science and Technology,2001,17:355-365.
[3] TRUFYAKOV V,MIKHEEV P,KUDRYAVTSEV Y. Fatigue strength of welded structures[M]. London:Harwood Academic,1999.
[4] TOTTEN G E,HOWES M,INOUE T. Handbook of residual stress and deformation of steel[M]. New York:ASM International Publishers,2002.
[5] GADALLAH R,TSUTSUMI S,HIRAOKA K,et al. Prediction of residual stresses induced by low transformation temperature weld wires and its validation using the contour method[J]. Marine Structures,2015,44:232-253.
[6] 米谷茂. 残余应力的产生和对策[M]. 北京:机械工业出版社,1983. SHIGERU Y. Generation of residual stress and counter-measure[M]. Beijing:China Machine Press,1983.
[7] 付学义,刘莉. 残余应力的危害及对策[J]. 包钢科技,2006(11):82-84. FU Xueyi,LIU Li. Harmfulness of residual stress and countermeasures[J]. Science & Technology of Baotou Steel (Group) Corporation,2006(11):82-84.
[8] ANTHONY J C,PAUL D W,BRUCE W D. The use of non-collinear mixing for nonlinear ultrasonic detection of plasticity and fatigue[J]. J. Acoust. Soc. Am.,2009,126:117-122.
[9] ZAROOG O S,ALI A,SAHARI B B,et al. Modeling of residual stress relaxation of fatigue in 2024-T351 aluminium alloy[J]. Int. J. Fatigue,2011,33:279-285.
[10] CHAN K S,ENRIGHT M P,MOODY J P,et al. Residual stress profiles for mitigating fretting fatigue in gas turbine engine disks[J]. International Journal of Fatigue,2010,32:815-823.
[11] 高玉魁. 超高强度钢喷丸表面残余应力在疲劳过程中的松弛规律[J]. 材料热处理学报,2007,28:102-105. GAO Yukui. Shot-peened surface residual stress relaxation during fatigue for ultra-high strength steel[J]. Transactions of Material and Heat Treatment,2007,28:102-105.
[12] 张定铨. 残余应力对金属疲劳强度的影响[J]. 理化检验-物理分册,2002,38(6):231-235. ZHANG Dingquan. The effects of residual stress on the fatigue strength of metal[J]. PTCA (Part A:Physical Testing),2002,38(6):231-235.
[13] YAMASHITA Y,MINAMI F. Evaluation of residual stress effects on brittle fracture strength based on weibull stress criterion[J]. Journal of ASTM International,2008,5(6):151-155.
[14] SANDSTRAM R,LANGENBERG P,SIEURIN H. Analysis of the brittle fracture avoidance model for pressure vessels in European standard[J]. International Journal of Pressure Vessels and Piping,2005,82(11):872-881.
[15] 郑文龙,施伟力. 残余应力与环境敏感开裂[J]. 理化检验-物理分册,2007,43(11):587-593. ZHENG Wenlong,SHI Weili. Relationship between residual stress with ESC[J]. PTCA (Part A:Physical Testing),2007,43(11):587-593.
[16] 王仁智. 金属材料的喷丸强化原理及其强化机理综述[J]. 中国表面工程,2012,25(6):1-6. WANG Renzhi. Overview on the shot peening principle and its strengthening mechanisms for metallic materials[J]. China Surface Engineering,2012,25(6):1-6.
[17] 刘道新,何家文. 经不同表面改性处理的钛合金的微动疲劳和微动磨损行为对比研究[J]. 摩擦学学报,2005,25(1):13-17. LIU Daoxin,HE Jiawen. Comparative study on the fretting fatigue and fretting wear behaviors of titanium alloy subject to various surface modifications[J]. Tribology,2005,25(1):13-17.
[18] LIU Y,WANG D P,DENG C Y,et al. Novel method to fabricate Ti-Al intermetallic compound coatings on Ti-6Al-4V alloy by combined ultrasonic impact treatment and electrospark deposition[J]. Journal of Alloys and Compounds,2015,628:208-212.
[19] XU D,XU W,XU W L. Investigation and application of pulse electromagnetic force generator for trailing control of welding stress[J]. Transactions of the China Welding Institution,2008,29(1):9-13.
[20] ROSSINI N S,DASSISTI M,BENYOUNIS K Y,et al. Methods of measuring residual stresses in components[J]. Materials and Design,2012,35:572-588.
[21] JULLIEN D,GRIL J. Growth strain assessment at the periphery of small-diameter trees using the two-grooves method:influence of operating parameters estimated by numerical simulations[J]. Wood Sci. Technol.,2008,42(7):55-65.
[22] E1928-07,ASTM:Standard practice for estimating the approximate residual circumferential stress in straight thin-walled tubing[S]. Philadelphia:ASTM,2007.
[23] CAO W,FATHALLAH R,CASTEX L. Correlation of Almen arc height with residual stresses in shot peening process[J]. Mater. Sci. Technol.,1995,11(9):67-73.
[24] FETULLAZAD E,AKYILDIZ H K,SARITAS S. Effects of the machining conditions on the strain hardening and the residual stresses at the roots of screw threads[J]. Mater. Design,2010,31(4):25-31.
[25] CHENG W,FINNIE I. Residual stress measurement and the slitting method[M]. New York:Springer,2007.
[26] GOU R B,ZHANG Y L,XU X D. Residual stress measurement of new and in-service X70 pipelines by X-ray diffraction method[J]. NDT&E International,2011,44:387-393.
[27] GANGULY S,FITZPATRICK M E,EDWARDS L. Use of neutron and synchrotron X-ray diffraction for evaluation of residual stresses in a 2024-T351 aluminum alloy variable-polarity plasma-arc weld[J]. Metall. Mater. Trans.,2006,37(2):11-20.
[28] WITHERS P J. Mapping residual and internal stress in materials by neutron diffraction[J]. Comp. Rendus. Phys.,2007,8(8):806-820.
[29] KIM S H,KIM J B,LEE W J. Numerical prediction and neutron diffraction measurement of the residual stresses for a modified 9Cr-1Mo steel weld[J]. J. Mater. Process. Technol.,2009,209(8):5-13.
[30] STARON P,CIHAK U,STOCKINGER M,et al. Characterization of residual stress in IN 718 turbine discs by neutron diffraction and finite element modeling[J]. Journal of Neutron Research,2007,5:185-192.
[31] DESVAUS S,DUQUENNOY M,GUALANDRI J,et al. Evaluation of residual stress profiles using the Barkhausen noise effect to verify high performance aerospace bearings[J]. Nondestructive Testing and Evaluation,2005,20(1):9-24.
[32] NISHANTH S,PRABHU J,JOSEYPHUS,et al. Residual stress analysis in surface mechanical attrition treated (SMAT) iron and steel component materials by magnetic barkhausen emission technique[J]. IEEE Transactions on Manetics,2012,48(12):4713-4717.
[33] 陶大锦,林晓雷,朱丹峰. 涡流技术在应力检测中的应用[J]. 机床与液压,2013,41(4):137-139. TAO Dajin,LIN Xiaolei,ZHU Danfeng. Test of applied stress using eddy current technology[J]. Machine Tool & Hydraulics,2013,41(4):137-139.
[34] ABU-NABAH B A,NAGY P B. Iterative inversion method for eddy current profiling of near-surface residual stress in surface-treated metals[J]. NDT&E International,2006,39:641-651.
[35] MOROZOV M,TIAN G,WITHERS P J. The pulsed eddy cur-rent response to applied loading of various aluminum alloys[J]. NDT&E International,2010,43:493-500.
[36] 路浩. 焊接残余应力超声波法无损测量研究[D]. 哈尔滨:哈尔滨工业大学,2009. LU Hao. Nondestructive residual stress measurement by ultrasonic method for welded structure[D]. Harbin:Harbin Institute of Technology,2009.
[37] FRUTOS E,MULTIGNER M,GONZALEZ C J. Novel approaches to determining residual stresses by ultra micro indentation techniques:Application to sandblasted austenitic stainless steel[J]. Acta Materialia,2010,58:4191-4198.
[38] WITHERS P J,TURSKI M,EDWARDS L. Recent advances in residual stress measurement[J]. International Journal of Pressure Vessels and Piping,2008,85:118-127.
[39] RAO M P,SANCHEZ A J,BELTZ G E,et al. Laminar ceramics that exhibit a threshold strength[J]. Science,1999,286:102-105.
[40] WANG Y D,TIAN H B,STOICA A D,et al. The development of grain-orientation dependent residual stressess in a cyclically deformed alloy[J]. Nature Materials,2003,2(2):101-106.
[41] ZHANG Y,WANG W H,GREER A L. Making metallic glasses plastic by control of residual stress[J]. Nature Materials,2006,5:857-860.
[42] ZHUANG W Z,HALFORD G R. Investigation of residual stress relaxation under cyclic load[J]. International Journal Fatigue,2001,23:31-37.
[43] 王者昌. 关于焊接残余应力消除原理的探讨[J]. 焊接学报,2000,21(2):55-58. WANG Zhechang. Discuss on principle of relieving welding residual stress[J]. Transactions of the China Welding Institution,2000,21(2):55-58.
[44] CHOI K S,PAN J. Simulations of stress distributions in crankshaft sections under fillet rolling and bending fatigue tests[J]. International Journal of Fatigue,2009,31:544-557.
[45] JACOMINO J L G,BURGOS J S,CRUZ A C,et al. Use of explosives in the reduction of residual stresses in the heated zone of welded joints[J]. Welding International,2009,14(2):170-175.
[46] 陈立功,倪纯珍,卢立香,等. 建筑钢结构的焊接残余应力与消除方法探索[C]//第十一次全国焊接会议论文集(第2册). 中国上海,2005:4. CHEN Ligong,NI Chunzhen,LU Lixiang,et al. Research on welding residual stress and relief method of building steel structure[C]//Proceedings of the 11th national welding conference (Volume 2). Shanghai China,2005:4.
[47] ZHOU G T,LIU X S,FANG H Y. Controlling of welding residual stress and deflection distortion for flat plate by longitudinal prestress method[J]. Materials for Mechanical Engineering,2008,32(3):78-81.
[48] 曲凤,刘松良,权纯逸,等. 振动时效对TA15钛合金厚板残余应力及力学性能的影响[J]. 金属热处理,2015,40(7):180-182. QU Feng,LIU Songliang,QUAN Chunyi,et al. Influence of vibratory stress relief on residual stress and mechanical properties of TA15 titanium alloy thick plate[J]. Heat Treatment of Metals,2015,40(7):180-182.
[49] 郭强军,方喜风,金成,等. 频谱谐振处理对铝合金焊接残余应力的影响[J]. 兵器材料科学与工程,2015,38(1):55-57. GUO Qiangjun,FANG Xifeng,JIN Cheng,et al. Effect of harmonic frequency spectrum VSR treatment on residual stress of aluminum alloy welded components[J]. Ordnance Material Science and Engineering,2015,38(1):55-57.
[50] CHENG X H,JOHN W,FISHER,et al. Residual stress modification by post-weld treatment and its beneficial effect on fatigue strength of welded structures[J]. International Journal of Fatigue,2003,25(3):1259-1269.
[51] SOUGATA R,JOHN W,FISHER. Enhancing fatigue strength by ultrasonic impact treatment[J]. International Journal of Steel Structures,2005(5):241-247.
[52] GALTIER A,STATNIKOV E S. The influence of ultrasonic impact treatment on fatigue behaviour of welded joints in high-strength steel[J]. Welding in the World,2004,48(5):61-66.
[53] TANIBAYA M. A theory of the Blaha effect[J]. Physica Status Solidi,2006,128(1):83-94.
[54] LANGENECKER B. Work-softening of metal crystals by alternating the rate of glide strain[J]. Acta Metallurgica,1961,9:937-940.
[55] LANGENECKER B. Effects on ultrasound on deformation characteristics of metals[J]. IEEE Transactions on Sonics and Ultrasonics,1966,13(1):1-8.
[56] DAUD Y,LUCAS M,HUANG Z. Modelling the effects of superimposed ultrasonic vibrations on tension and compression tests of aluminium[J]. Journal of Materials Processing Technology,2007,186:179-190.
[57] 赵升吨,李泳峄,范淑琴. 超声振动塑性加工技术的现状分析[J]. 中国机械工程,2013,24(6):835-840. ZHAO Shengdun,LI Yongyi,FAN Shuqin. State analysis of plastic processing technology with ultrasonic vibration[J]. China Mechanical Engineering,2013,24(6):835-840.
[58] SIDDIQ A,SAYED T E. Ultrasonic-assisted manufacturing processes:variational model and numerical simulations[J]. Ultrasonics,2012,52:521-529.
[59] DU L Q,WANG Q J. Experimental study on ultrasonic stress relief for cured SU-8 photoresist layer[J]. Micro-electronic Engineering,2010,87:2555-2560.
[60] DU L Q,WANG Q J,ZHANG X L. Optimization of ultrasonic stress relief process parameters based on fuzzy neural network[J]. Journal of Micro-Nano Mechatronics,2011,6:39-46.
[61] 杜立群,王煜,王启佳,等. 聚合物SU-8光刻胶超声时效实验研究[J]. 大连理工大学学报,2010,50(6):907-911. DU Liqun,WANG Yu,WANG Qijia,et al. Experimental study of ultrasonic stress relief used in SU-8 photorsist[J]. Journal of Dalian University of Technology,2010,50(6):907-911.
[62] SHALVANDI M,HOJJAT Y,ABDULLAH A,et al. Influence of ultrasonic stress relief on stainless steel 316 specimens:A comparison with thermal stress relief[J]. Materials and Design,2013,46:713-723.