Compensation Method of Main Force Additional Force of Portable Surgical

doi:10.3901/JME.2018.17.062

Abstract

Abstract: Based on the Lagrange equation and the Stribeck friction model, a complete dynamic model with joint friction is established according to the influence of the gravity of the rod, the joint friction force and the inertia force of the master manipulator on the perception of the true strength of the manipulator. The robot master manipulator dynamics model based on compensation model is established by gravity, friction and inertia force three, analysis of the robot master manipulator compensation feedback force and displacement of the cause and compensation principle, put forward the corresponding compensation feedback force and displacement compensation method. By comparing the clinical results of the preliminary study, it is verified that the force compensation control method can balance the gravity, joint friction and inertia force of the main hand, and ultimately realize the real force perception of the surgeon and improve the accuracy of the operation.

Key words: additional displacement compensation, additional force compensation, portable surgical robot

CLC Number:

TP242

LING Hao, WANG Guohui, LI Zheng, LI Jianming, YI Bo, KONG Kang, WANG Shuxin, ZHU Shaihong. Compensation Method of Main Force Additional Force of Portable Surgical[J]. Journal of Mechanical Engineering, 2018, 54(17): 62-68.

References

[1] SUN Yinshan,WU Dongmei,DU Zhijiang,et al. An effective algorithm for needle tip displacement compensation in robot-assisted percutaneous surgery[J]. High Technology Letters,2010,16(3):306-310.
[2] 钱欢,周航飞,费健,等. 多关节单创口腹腔微创手术机器人设计[J]. 机械设计与制造,2014(5):134-137. QIAN Huan,ZHOU Hangfei,FEI Jian,et al. The multi-joint and single-wound abdominal minimally invasive surgery robot design[J]. Machinery Design & Manufacture,2014(5):134-137.
[3] 孔祥战,段星光,王永贵,等. 颌骨重建手术机器人定位精度分析与误差补偿[J]. 北京理工大学学报,2016(12):1248-1252. KONG Xiangzhan,DUAN Xingguang,WANG Yonggui,et al. Positioning accuracy analysis and error compensation of medical robot assisted for man[J]. Transaction of Beijing Institute of Technology,2016(12):1248-1252.
[4] MURTY P V. Error compensation algorithm for patient positioning robotics system[C]//Nanosensors,Biosensors,and Info-Tech Sensors and Systems. Nanosensors,Biosensors,and Info-Tech Sensors and Systems 2009,2009:72910P-72910-12.
[5] 付宜利,李坤,潘博,等. 微创手术机器人力检测与力反馈技术研究现状[J]. 机器人,2014,36(1):117-128. FU Yili,LI Kun,PAN Bo,et al. A survey of force sensing and force feedback technology for robot-assisted minimally invasive surgical system[J]. Robot,2014,36(1):117-128.
[6] KWARTOWITZ D M,HERRELL S D,GALLOWAY R L. Toward image-guided robotic surgery:Determining intrinsic accuracy of the da Vinci robot[J]. International Journal of Computer Assisted Radiology & Surgery,2006,1(3):157-165.
[7] 杨文明. 具有力感觉的通用型手术机器人主手精度问题研究[D]. 天津:天津大学,2008. YANG Wenming. Research on the precision of universal surgical master hand with force sense[D]. Tianjin:Tianjin University,2008.
[8] MELINTE O,MUNTEAUU R,GAL I A,et al. Compensating dynamics of impedance haptic devices using neural networks[C]//International Symposium on Advanced Topics in Electrical Engineering,IEEE,2013:1-6.
[9] 贠今天,刘阳阳,杨全利,等. 力反馈主操作手附加力的补偿策略研究[J]. 中国机械工程,2017,28(10):1156-1162. YUN Jintian,LIU Yangyang,YANG Quanli,et al. Research on compensation strategy for induced forces of force feedback master manipulators[J]. China Mechanical Engineering,2017,28(10):1156-1162.
[10] 桑宏强. 基于模型的微创手术机器人力检测技术研究[D]. 天津:天津大学,2011. SANG Hongqiang. Research on force measurement technology based on model in minimally invasive surgery robot[D]. Tianjin:Tianjin University,2011.
[11] BUTNARIU S,GIRBACIA F. Methodology for the identification of needles trajectories in robotic brachytherapy procedure using VR technology[J]. Applied Mechanics & Materials,2013,332(332):503-508.
[12] BERKELMAN P,MA J. A compact modular teleoperated robotic system for laparoscopic surgery[M]. Sage Publications,Inc.,2009.
[13] TAKHMAR A,POLUSHIN I G,TALASAZ A,et al. Cooperative teleoperation with projection-based force reflection for MIS[J]. IEEE Transactions on Control Systems Technology,2014,23(4):1411-1426.
[14] LI Jianmin,XING Yuan,LIANG Ke,et al. Kinematic design of a novel spatial remote center-of-motion mechanism for minimally invasive surgical robot[J]. Journal of Medical Devices,2015(9):1-8

[1]	ZHANG Yongshun, LIU Gaoren, LIU Zhijun, LIU Zhenhu, DONG Hai. Decoupling Drive Mechanism of a New Type of Electromagnetic Spherical Wrist [J]. Journal of Mechanical Engineering, 2024, 60(19): 1-10.
[2]	LIANG Liang, WU Chengdong, LIU Shichang. Optimal Trajectory Planning Algorithm of Industrial Robot Based on Joint Loss Constraint [J]. Journal of Mechanical Engineering, 2024, 60(19): 11-19.
[3]	WANG Xiaofei, XU Jiazhong, DING Liang, HUANG Cheng, YANG Huaiguang, LIU Meijun. Tendentious Chained Path Planning Algorithm [J]. Journal of Mechanical Engineering, 2024, 60(19): 53-61.
[4]	DU Guofeng, ZHAO Meng, WU Jianxu, ZHANG Dong. Vision-based Autonomous Motion Control Method for Closed-chain Multi-legged Robot [J]. Journal of Mechanical Engineering, 2024, 60(19): 62-70.
[5]	GUAN Haijie, WANG Boyang, GONG Jianwei, CHEN Huiyan. Unified Motion Planning Method for Heterogeneous Vehicles [J]. Journal of Mechanical Engineering, 2024, 60(18): 288-298.
[6]	QIN Yanding, CAI Zhuocong, SHEN Yajing, HAN Jianda. Review and Prospect on the Magnetic Actuation Miniaturized Medical Robots [J]. Journal of Mechanical Engineering, 2024, 60(17): 1-21.
[7]	ZHENG Siyuan, TIAN Junjie, WANG Lipeng, LIU Shichuang, WANG Hongbo, NIU Jianye. Design and Analysis of Compact Rigid-flexible Coupled Waist Rehabilitation Robot [J]. Journal of Mechanical Engineering, 2024, 60(17): 156-166.
[8]	WANG Yaonan, XIE He, DENG Jingdan, MAO Jianxu, LI Wenlong, ZHANG Hui. Overview of Key Technologies for Measurement Robots in Intelligent Manufacturing [J]. Journal of Mechanical Engineering, 2024, 60(16): 1-18.
[9]	FU Tao, ZHANG Tianci, CUI Yunhao, SONG Xueguan. Deep Learning-enhanced Intelligent Electric Shovel Digging Trajectory Tracking Control [J]. Journal of Mechanical Engineering, 2024, 60(16): 357-366.
[10]	SONG Jingzhou, GONG Xinglong, DUAN Jiachen, ZHANG Tengfei. Review on Mechanism Design and Jumping Process Control of Jumpable Mobile Robots [J]. Journal of Mechanical Engineering, 2024, 60(15): 1-17.
[11]	GAO Haibo, WANG Shengjun, SHAN Kaizheng, HAN Liangliang, YU Haitao. Sagittal Walking Control of Biped Robot Equipped with Artificial Tendon [J]. Journal of Mechanical Engineering, 2024, 60(15): 18-27.
[12]	JIANG Lin, LI Yunfei, TANG Bo, LIU Qi, GUO Yufei, ZHAO Hui. Dynamic Localization Research on Improved AMCL Based on the Dimensional Chain of Semantic Objects [J]. Journal of Mechanical Engineering, 2024, 60(15): 49-59.
[13]	ZHANG Dequan, LI Xingao, ZHANG Ning, NING Guosong, HAN Xu. Refinement Modeling Method of Error Field in Full Domain for Industrial Robot and Its Corresponding Error Compensation Strategy [J]. Journal of Mechanical Engineering, 2024, 60(13): 316-329.
[14]	YAO Yufeng, PEI Shuo, GUO Junlong, WANG Jiajia. Review of Research on Upper-limb Rehabilitation Training Robots [J]. Journal of Mechanical Engineering, 2024, 60(11): 115-134.
[15]	LIU Yajun, ZI Bin, PAN Jingfeng, QIAN Sen. Position and Attitude Control Strategy of Spray-painting Robot Bilateral Teleoperation with Time-varying Delay [J]. Journal of Mechanical Engineering, 2024, 60(11): 226-236.