On-line Vibration Monitoring and Analysis of Thin-walled Workpiece Based on PVDF Film Sensor in Milling Process

doi:10.3901/JME.2018.17.116

Abstract

Abstract: Thin-walled workpiece tends to vibrate easily because of its weak rigidity in machining process. Non-linearity in machining thin-walled workpiece makes it difficult to predict the vibration, and there is no precise theoretical model previously. To understand the vibration behaviour in milling thin-walled workpiece, a dynamic vibration monitoring model of cantilever workpiece is proposed based on modal theory, in which vibration of any point on cantilever beam considering N order modes can be monitored by dynamic displacements measured by N sensors. Taking a cantilever plate as an example, an on-line vibration monitoring method for workpiece vibration during milling process is proposed by adopting a polyvinylidene fluoride (PVDF) film sensor as the displacement sensor. From the analysis of signal in time-frequency domain, it can be concluded that PVDF thin film sensor can monitor periodic resonance signals and high-frequency vibration signals, and high-frequency vibration is easy to occur in entering, exiting stage which frequency is scattered in the vicinity of frequency multiplication of periodic cutting excitation. Finally, only considering first-order mode of the workpiece, vibration of interaction point on workpiece between workpiece and tool is calculated and by comparing with the relieving amount of workpiece due to deflection, validity of the method is proved.

Key words: on-line monitoring, PVDF film sensor, thin-walled workpiece, vibration in machining process

CLC Number:

TH113

LIU Dongsheng, ZHANG Dinghua, LUO Ming, LUO Huan. On-line Vibration Monitoring and Analysis of Thin-walled Workpiece Based on PVDF Film Sensor in Milling Process[J]. Journal of Mechanical Engineering, 2018, 54(17): 116-123.

References

[1] 张定华,张仲玺,罗明,等. 面向航空复杂薄壁零件智能加工的进化建模方法[J]. 航空制造技术,2016,59(16):93-98. ZHANG Dinghua,ZHANG Zhongxi,LUO Ming,et al. Evolution modeling of intelligent machining for complex thin-walled parts[J]. Aeronautical Manufacturing Technology,2016,59(16):93-98.
[2] 胡权威,乔立红,张洪伟. 薄壁结构件铣削参数有限元正交优势分析及优化[J]. 机械工程学报,2013,49(21):176-184. HU Quanwei,QIAO Lihong,ZHANG Hongwei. Optimization of thin-walled part milling parameters based on finite element and orthogonal dominance analysis[J]. Journal of Mechanical Engineering,2013,49(21):176-184.
[3] 高宏力,许明恒,傅攀,等. 基于动态树理论的刀具磨损监测技术[J]. 机械工程学报,2006,42(7):227-230. GAO Hongli,XU Mingheng,FU Pan,et al. Tool wear monitoring based dynamic tree[J].Chinese Journal of Mechanical Engineering,2006,42(7):227-230.
[4] RITOU M,GARNIER S,FURET B,et al. Angular approach combined to mechanical model for tool breakage detection by eddy current sensors[J]. Mechanical Systems and Signal Processing,2014,44(1):211-220.
[5] ANDREAS A,SIMON S P,YUSUF A,et al. High frequency bandwidth cutting force measurement in milling using capacitance displacement sensors[J]. International Journal of Machine Tools and Manufacture. 2005,45(9):993-1008.
[6] GUO J,LEE K M,LIU W,et al. Design criteria based on modal analysis for vibration sensing of thin-wall plate machining[J]. IEEE/ASME Transactions on Mechatronics,2015,20(3):1406-1417.
[7] TSAI Y H,CHEN J C,LOU S J. An in-process surface recognition system based on neural networks in end milling cutting operations[J]. International Journal of Machine Tools and Manufacture,1999,39(4):583-605.
[8] UANG P L,LI J F,SUN J,et al. Cutting signals analysis in milling titanium alloy thin-part components and non-thin-wall components[J]. The International Journal of Advanced Manufacturing Technology,2015,84(9):1-9.
[9] GRANSTROM J,FEENSTRA J,SODANO H A,et al. Energy harvesting from a backpack instrumented with piezoelectric shoulder straps[J]. Smart Materials and Structures,2007,16(5):1810.
[10] ISHIDA K,HUANG T C,HONDA K,et al. Insole pedometer with piezoelectric energy harvester and 2 V organic circuits[J]. IEEE Journal of Solid-State Circuits,2013,48(1):255-264.
[11] HARRIS G R,PRESTON R C,DEREGGI A S. The impact of piezoelectric PVDF on medical ultrasound exposure measurements, standards, and regulations[J]. IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control,2000,47(6):1321-1335.
[12] WANG Feng,TANAKA M,CHONAN S. Development of a PVDF piezopolymer sensor for unconstrained in-sleep cardiorespiratory monitoring[J]. Journal of Intelligent Material Systems and Structures,2003,14(3):185-190.
[13] CHOI S,JIANG Z. A novel wearable sensor device with conductive fabric and PVDF film for monitoring cardiorespiratory signals[J]. Sensors and Actuators A:Physical,2006,128(2):317-326.
[14] MA C C,CHUANG K C,PAN S Y. Polyvinylidene fluoride film sensors in collocated feedback structural control:Application for suppressing impact-induced disturbances[J]. IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control,2011,58(12):2539-2554.
[15] LUO H,HANAGUD S. PVDF film sensor and its applications in damage detection[J]. Journal of Aerospace Engineering,1999,12(1):23-30.
[16] HUH Y H,KIM J I,LEE J H,et al. Application of PVDF film sensor to detect early damage in wind turbine blade Components[J]. Procedia Engineering,2011,10(7):3304-3309.
[17] SHIRINOV A V,SCHOMBURG W K. Pressure sensor from a PVDF film[J]. Sensors and Actuators A:Physical,2008,142(1):48-55.
[18] KIMOTO A,SHIMADA S. A proposal of new multifunctional pressure sensor based on PVDF films[J]. IEEE Transactions on Instrumentation and Measurement,2013,62(10):2870-2877.
[19] LUO Ming,LIU Dongsheng,LUO Huan. Real-time deflection monitoring for milling of a thin-Walled workpiece by using PVDF thin-film sensors with a cantilevered beam as a case study[J]. Sensors,2016,16(9):1470.
[20] 李志渤,黄强先,史科迪,等基于PVDF的三维纳米谐振触发测头及定位系统[J]. 机械工程学报,2015,51(2):1-6. LI Zhibo,HUANG Qiangxian,SHI Kedi,et al. Three-dimensional nano resonant trigger probe and positioning system based on PVDF film[J]. Journal of Mechanical Engineering,2015,51(2):1-6.
[21] MARAT-MENDES R,DIAS C J,MARAT-MENDES J N. Measurement of the angular acceleration using a PVDF and a piezo-composite[J]. Sensors and Actuators A:Physical,1999,76(1-3):310-313.
[22] DAKU B L,MOHAMED E M,PRUGGER A F. A PVDF transducer for low-frequency acceleration measurements[J]. Isa Transactions,2004,43(3):319-328.
[23] MA L,MELKOTE S N,MOREHOUSE J B,et al. Thin-film PVDF sensor-based monitoring of cutting forces in peripheral end milling[J]. Journal of Dynamic Systems,Measurement,and Control,2012,134(5):051014.
[24] CLOUGH R W,PENZIEN J. Dynamics of structures[M]. New York:McGraw-Hill,2003.
[25] MEASUREMENT SPECIALTIES Inc. Piezo film sensors technical manual[M]. Norristown:Measurement Specialties Inc.,2002.
[26] 王庆锋,吴斌,宋吟蔚,等. PVDF压电传感器信号调理电路的设计[J]. 仪器仪表学报,2006(S2):1653-1655. WANG Qingfeng,WU Bin,SONG Yinwei,et al. Design of a signal conditioner circuit for PVDF piezoelectric transducer[J]. Chinese Journal of Scientific Instrument,2006(S2):1653-1655.