Vibration Performance of High-speed Vehicles with Axle Box Bearing

doi:10.3901/JME.2018.16.144

Abstract

Abstract: Dynamic interaction between wheelset and bearing will be produced during the train operation, and cause axle box and bearing's vibration which have important influence on safety of the train operation, unfortunately, previous researches has not considered this dynamic coupling effect. The coupling motion between bearing and train is considered, a double row tapered roller bearing model with 6 degrees of freedom roller and 6 degree of freedom cage is established, and vibration characteristics of axle box bearing of high speed EMU are investigated based on vehicle-track coupling dynamics model. The results show that the wheel rail excitation increases the vibration of the axle box bearing, causing the roller and raceway to collide in the unloaded zone, and the maximum impact force in the unloaded zone can reach about half of the maximum impact force in the all loaded zone; the wheel rail excitation can also increase the impact force between the roller and cage, and increase the cage slippage; axle box amplitude is influenced by bearing amplitude in more than 1 kHz; the wheelset and axle box vibration acceleration amplitude is close, but the vertical acceleration of axle is slightly larger than the vertical acceleration of wheelset, the lateral acceleration of axle is slightly smaller than the lateral acceleration of wheelset. The research method of vehicle-bearing coupling vibration enriches the research scope of vehicle system dynamics, and the research results have great significant to reveal the vibration and load characteristics of the axle box bearing of EMU.

Key words: axle box bearing, high speed vehicle, load, vibration performance

CLC Number:

U271.91

CHA Hao, REN Zunsong, XU Ning. Vibration Performance of High-speed Vehicles with Axle Box Bearing[J]. Journal of Mechanical Engineering, 2018, 54(16): 144-151.

References

[1] WALTERS. The dynamics of ball bearings[J]. Trans. ASME Journal of Lubrication, 1971(93):1-10.
[2] GUPTP K. Dynamics of rolling element bearings, Part-s I, Ⅱ, Ⅲ, and IV[J]. Journal of Lubrication Technology, 1979, 101(3):293-326.
[3] GUPTAP K. On the dynamics of a tapered roller bearing[J]. Journal of Tribology, 1989(111):278-287.
[4] GUPTAP K. Cage unbalance and wear in roller bearings[J]. Wear, 1991(147):105-118.
[5] GUPTAP K. Advance dynamic of rolling elements[M]. New York:Springer-Verlag, 1984.
[6] BERCEA I, CRETU S, NELIAS D. Analysis of doublerow tapered roller bearing, Part I-Model[J]. Tribology Transactions, 2003, 46(2):228-239.
[7] NELIAS D, BERCEA I, MITU I. Analysis of double-row tapered roller bearing, Part Ⅱ-results:Prediction of fatigue life and heat dissipation[J]. Tribology Transactions, 2003, 46(2):240-247.
[8] 颜家森,朱龙泉,赵三星,等. 高速铁路轴箱轴承载荷分布分析[J]. 轴承, 2012(10):12-16. YAN Jiasen, ZHU Longquan, ZHAO Sanxing, et al. Analysis on load distribution of high-speed railway axle box bearings[J]. Bearing, 2012(10):12-16.
[9] 郝烨江,李强,郑静. 基于ABAQUS的列车轴箱轴承动力学分析[J]. 轴承, 2014(3):10-15. HAO Yejiang, LI Qiang, ZHENG Jing. Dynamics analysis of train axle box bearings based on ABAQUS[J]. Bearing, 2014(3):10-15.
[10] 郝烨江. 高速列车轴箱轴承可靠性建模研究[D]. 北京:北京交通大学, 2014. HAO Yejiang. Reliability moding and research of the axle box roller bearing used in high-speed train[D]. Beijing:Beijing Jiaotong University, 2014.
[11] 郑静. 高速列车轴箱轴承疲劳寿命研究[D]. 北京:北京交通大学, 2014. ZHENG Jing. Study on the fatigue life of the axle box bearing for high speed train[D]. Beijing:Beijing Jiaotong University, 2014.
[12] 曹青松,郭小兵,熊国良,等. 高速列车滚动轴承支承松动系统动力学特性研究[J]. 机械工程学报, 2016, 52(21):87-95. CAO Qingsong, GUO Xiaobing, XIONG Guoliang, et al. Study on dynamic characteristics of high-speed train rolling bearing with pedestal looseness[J]. Journal of Mechanical Engineering, 2016, 52(21):87-95.
[13] 曹青松,朱志强,叶征春,等. 动车组滚动轴承非线性动力学特性分析[J]. 轴承, 2013(8):8-11. CAO Qingsong, ZHU Zhiqiang, YE Zhengchun, et al. Analysis on nonlinear dynamic characteristics of rolling bearings for multiple unit trains[J]. Bearing, 2013(8):8-11.
[14] 刘国云,曾京,罗仁,等. 轴箱轴承缺陷状态下的高速车辆振动特性分析[J]. 振动与冲击, 2016, 35(9):37-42, 51. LIU Guoyun, ZENG Jing, LUO Ren, et al. Vibration performance of high-speed vehicles with axle box bearing defects[J]. Journal of Vibration and Shock, 2016, 35(9):37-42, 51.
[15] 刘国云,曾京,戴焕云,等. 考虑轴箱轴承表面波纹度的高速车辆振动特性分析[J]. 机械工程学报, 2016, 52(14):147-156. LIU Guoyun, ZENG Jing, DAI Huanyun, et al. Vibration performance of high-speed vehicles under axle box bearing surface waviness[J]. Journal of Mechanical Engineering, 2016, 52(14):147-156.
[16] 翟婉明. 车辆-轨道垂向耦合动力学[D]. 成都:西南交通大学, 1991. ZHAI Wanming. Vehicle-track coupling dynamics[D]. Chengdu:Southwest Jiaotong University, 1991.
[17] KLECKNER R J, PIRVICS J. High speed cylindrical roller bearing analysis-SKF computer program CYBEAN, Vol.1:Analysis[R]. King of Prussia:KF Industries Inc., 1978.