Multi-objective CNC Milling Parameters Optimization Model for#br#
Energy Efficiency

doi:10.3901/JME.2016.21.120

Abstract

Abstract: In the process of CNC machining, cutting parameters are important components, reasonable choice of cutting parameters can significantly affect the energy efficiency. To improve the energy efficiency of machine tool, the characteristics of energy consumption composition characteristic of the CNC milling and in machining process are analyzed. Then the energy model of CNC milling is established, the coefficients of the model are obtained by nonlinear regression. And then a multi-objective optimization model is established, with the optimization objectives of maximizing energy efficiency and minimizing processing time. Finally, the model is solved based on Tabu search optimization algorithm, verifying the validity of the model by comparing the algorithm optimization results with experimental results.

Key words: CNC milling, energy efficiency, multi-objective optimization, cutting parameters

LI Congbo, ZHU Yantao, LI Li, CHEN Xingzheng. Multi-objective CNC Milling Parameters Optimization Model for#br# Energy Efficiency[J]. Journal of Mechanical Engineering, 2016, 52(21): 130-137.

[1]	ZHAO Xikun, LI Congbo, YANG Yong, Lü Yan, JIANG Shuyan. A Data and Model Hybrid Driven Cutting Parameter Energy-efficiency Optimization Method for Flexible Machining Process Considering Cutting Tool Flexibility [J]. Journal of Mechanical Engineering, 2024, 60(7): 236-248.
[2]	CHAI Yiyang, ZHANG Lele, DOU Weiyuan, ZHANG Haifeng. Parallel NSGA-III Based Multi-objective Optimization for Side Wall Section Size of High-speed Train Car-body [J]. Journal of Mechanical Engineering, 2024, 60(6): 321-333.
[3]	SU Jiantao, DONG Shaohua, ZHU Shimin. Research on Machine Fault Rescheduling Problem of Multi Objective Hybrid Flow Shop Based on Intelligent Manufacturing [J]. Journal of Mechanical Engineering, 2024, 60(4): 438-448.
[4]	TANG Hongtao, WEI Shupeng, LI Xixing, LEI Deming, WANG Kaipu. Coordinated Optimization of Heterogeneous Vehicle Allocation and Route Considering Queuing Factors [J]. Journal of Mechanical Engineering, 2024, 60(4): 458-472.
[5]	LÜ Liye, LU Yujun, WANG Shuo, LIU Yin, LI Kunpeng, SONG Xueguan. Survey and Prospect of Surrogate Model Technique and Application [J]. Journal of Mechanical Engineering, 2024, 60(3): 254-281.
[6]	MA Yong, HU Zushuo, WANG Wenqi, CHANG Xingshan, YAN Xinping. Development Status and Prospect of Marine Intelligent Equipment and System [J]. Journal of Mechanical Engineering, 2024, 60(20): 181-192.
[7]	WANG Xu, JIANG Xingyu, YANG Guozhe, SUN Meng, YU Shenhong, BI Kaihang, ZHAO Rizheng, LIU Weijun. Research on Optimization of Human-Machine Interface Layout of Laser Cleaning Equipment Based on PSO-SSA [J]. Journal of Mechanical Engineering, 2024, 60(20): 372-387.
[8]	XIONG Rui, LI Zhengyang, YAN Runbo, YANG Ruixin. Research on All-climate Self-heating Lithium-ion Battery and Low Temperature Extreme Heating Strategy [J]. Journal of Mechanical Engineering, 2024, 60(18): 247-257.
[9]	LIANG Xu, ZHANG Jianyong, LI Guotao, SU Tingting, HE Guangping, HOU Zengguang. Redundant Parallel Mechanism for Fracture Reduction Surgery: Design, Modeling and Performance Analysis [J]. Journal of Mechanical Engineering, 2024, 60(17): 133-146.
[10]	WANG Hongliang, YONG Jianyu, PI Dawei, XIE Boyuan, WANG Erlie, WANG Xianhui. Multi-vehicle Formation Switching Trajectory Planning Based on Bézier Curve and Multi-objective Optimization Method [J]. Journal of Mechanical Engineering, 2024, 60(16): 270-279.
[11]	ZHAO Feng, HU Weifei, LI Guang, DENG Xiaoyu, LIU Zhenyu, GUO Yunfei, TAN Jianrong. Multi-objective Optimization Design Method Based on a Hybrid Metric Adaptive Sampling Surrogate Model [J]. Journal of Mechanical Engineering, 2024, 60(13): 81-91.
[12]	WANG Juan, LIU Meihong, ZHU Shixing, CHEN Wenbo, LI Yuxian, SUN Junfeng. Multi-objective Hybrid Teaching-learning-based Optimization Method for Structural Parameters of Finger Seal [J]. Journal of Mechanical Engineering, 2023, 59(9): 157-170.
[13]	ZHANG Xin-tong, ZHANG Cheng-ming, LI Li-yi, FU Peng-rui. Design Method of High Efficiency Lightweight Permanent Magnet Synchronous Motor for Electric Propulsion [J]. Journal of Mechanical Engineering, 2023, 59(8): 181-195.
[14]	WANG Xu, ZHU Qian, LIU Peiji, YU Fangyuan. Multi-scene Comprehensive Evaluation of Energy Efficiency Testing Methods for Machine Tools [J]. Journal of Mechanical Engineering, 2023, 59(7): 265-275.
[15]	LIU Weijun, SUO Yingqi, JIANG Xingyu, TIAN Zhiqiang, ZHANG Dong, YANG Guozhe, WANG Hongyue, HAN Qingbing. Low-carbon Modeling and Process Parameter Optimization for Laser Cleaning Process [J]. Journal of Mechanical Engineering, 2023, 59(7): 276-294.

Multi-objective CNC Milling Parameters Optimization Model for#br# Energy Efficiency

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments