Stress Corrosion Cracking Behavior of 35CrMo Steel in Acidic Hydrogen Sulfide Solutions

Abstract

Abstract: The combination of electrochemical corrosion technologies were performed to study corrosion of 35CrMo steel in H2S solution with various pH values by simulate the low concentrations of hydrogen sulfide environment of oilfield in the pit. Stress corrosion cracking(SCC) of 35CrMo steel in acidic hydrogen sulfide solutions with various pH values and temperature was investigated by U-bent specimen immersing test and slow strain rate tensile test. It is shown that 35CrMo steel exhibits a high susceptibility to SCC in acidic hydrogen sulfide solutions. The susceptibility and corrosion increases by decreasing the pH value of the solution. The susceptibility varied seriously with the change of pH value. The decrease of pH would accelerate the cathodic process greatly, leading to the increase of corrosion rate and hydrogen charging current density, resulting the local anodic dissolution and hydrogen embrittlement effect more significant. The different susceptibility to SCC of 35CrMo steel in 15-90 ℃, Maximum susceptibility in 35 ℃ and 90 ℃. The SCC mechanism of 35CrMo steel is hydrogen embrittlement(HE) mainly and combination of anodic dissolution(AD) in acidic hydrogen sulfide solutions.

Key words: 35CrMo steel;H2S;stress corrosion cracking;corrosion

CLC Number:

TG174

HAO Wenkui;LIU Zhiyong;DU Cuiwei;LI Xiaogang. Stress Corrosion Cracking Behavior of 35CrMo Steel in Acidic Hydrogen Sulfide Solutions[J]. , 2014, 50(4): 39-46.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2014/V50/I4/39

[1]	LI Guang, FU Yichuan, LA Peiqing, SHI Yu. Research Progress on Corrosion Mitigation Strategies of Stainless Steel in Concentrated Solar Power Generation [J]. Journal of Mechanical Engineering, 2025, 61(20): 49-61.
[2]	LUO Xiaotao, ZHANG Guodong, GAN Yuhe, XU Kangwei, YAO Jiantao, CHEN Lingjie, LI Changjiu. Microstructure and Properties of Cu-Ni20Cr4B Antifouling Coating Prepared by Atmospheric Plasma Spraying [J]. Journal of Mechanical Engineering, 2025, 61(10): 90-99.
[3]	LIU Bo, ZHANG Zhiqiang, KANG Jiajie, XU Lianyong, GONG Pan, LUO Renzhi, ZHANG Tiangang. Investigations of Arc Plasma Heat Transfer Behavior in CMT-P Arc Manufacturing of Duplex Stainless Steel [J]. Journal of Mechanical Engineering, 2025, 61(10): 128-140.
[4]	CHENG Jingyue, YAO Haihua, ZHAO Wanxin, YANG Yange, WANG Guohong, ZHOU Zheng. Microstructure and Frictional Wear Behavior of Al_0.6CoCrFeNiTi/TiC Cladding Layers [J]. Journal of Mechanical Engineering, 2025, 61(10): 141-151.
[5]	ZHAO Jiaxin, JIN Guo, CUI Xiufang, LIU Changhao, QI Meng WU Di. Boron-lithium Water Corrosion Characteristics and Tribological Properties of CrAIX (X=Nb, Mo) Coatings on Zirconium Alloy Surfaces for Nuclear Applications [J]. Journal of Mechanical Engineering, 2025, 61(10): 178-190.
[6]	YU Zhenglei, GAO Denglong, XU Zezhou, GUO Yunting, NIU Shichao, HAN Zhiwu, ZHANG Zhihui, REN Luquan. Effect of Scanning Speed on Corrosion Resistance of NiTi Alloy Melted by Laser Powder Bed [J]. Journal of Mechanical Engineering, 2025, 61(9): 101-111.
[7]	LI Yongquan, HAO Qingrui, LIANG Guodong, WANG Cunxi, GAO Yang. Microstructure and High Temperature Oxidation Properties of Al-Y Co-deposition Coating on TiAl Alloy [J]. Journal of Mechanical Engineering, 2025, 61(4): 137-146.
[8]	Han Bingyuan, Gao Xianghan, DU Wenbo, LI Hongliang, Cui Fangfang, WU Haidong, Zhu Sheng. Tribological Properties of Nickel Based Coatings Sprayed by Plasma on Aluminum Alloy Surface at Different Temperatures [J]. Journal of Mechanical Engineering, 2024, 60(24): 177-187.
[9]	WANG Linting, ZHU Lina, LI Runjie, KANG Jiajie, LU Xiaoliang. Comparative Study on Corrosion Resistance of Cold Sprayed and High Velocity Oxy-fuel Sprayed FeCoCrNiMn High Entropy Alloy Coatings [J]. Journal of Mechanical Engineering, 2024, 60(14): 117-125.
[10]	WU Yaru, ZHANG Zhenyu, ZHANG Yangze, WU Jiamin, TIAN Chong, HUANG Hailu, LIN Xin, SHI Yusheng. Effect of Pore-forming Agent Type on the Properties of Porous Si₃N₄ Ceramics Prepared by Digital Light Processing [J]. Journal of Mechanical Engineering, 2024, 60(11): 273-282.
[11]	WANG Weizhi, MA Guozheng, HAN Heng, LI Yang, ZHOU Li, ZHAO Haichao, XU Jianfeng, GUO Weiling, WANG Haidou. Research Status and Prospect of Laser Cladding Ceramic Coatings [J]. Journal of Mechanical Engineering, 2023, 59(7): 92-109.
[12]	MOU Honglin, CAI Zhihai, MA Guozheng, ZHU Xianyong, ZHOU Li, HE Pengfei, LIU Ming, WANG Haidou. Research Status and Prospect of Wear-resistant and Self-lubricating Coatings with Wide Temperature Range by Thermal Spraying [J]. Journal of Mechanical Engineering, 2023, 59(7): 139-155.
[13]	KE Wenchao, CONG Baoqiang, QI Zewu, AO Sansan, PANG Bowen, GUO Wei, PENG Bei, CENG Zhi. Arc-fused Coating Process and Micro-joining Mechanism of NiTi Shape Memory Alloys [J]. Journal of Mechanical Engineering, 2022, 58(2): 176-184.
[14]	ZHAO Hang, GAO Chang, WU Xiaoyu, XU Bin, LEI Jianguo. Microstructure and Tribological Properties of WC-Ni Cermet Coatings Prepared by Ultrasonic-assisted Electro-spark Powder Deposition [J]. Journal of Mechanical Engineering, 2021, 57(23): 252-261.
[15]	LI Yunfeng, SHI Yan. Investigation on Microstructure and Performance of Wear-resistant and Impact-resistant Composite Coating Produced by Laser Cladding [J]. Journal of Mechanical Engineering, 2021, 57(12): 237-246.

Stress Corrosion Cracking Behavior of 35CrMo Steel in Acidic Hydrogen Sulfide Solutions

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments