Research and Application of the Flatness Measurement Calculation Model on Cold Rolling Mill

Abstract

Abstract: In order to obtain accurate flatness measurement, the calibration model as well as filter calculation of measured flatness signal are set by analysis of the principle and configuration of shapemeter roll. The model of thickness distribution across strip is set, from which the calculation precision of stress distribution across strip is improved by taking into account of thickness difference across strip. For the purpose of correcting measured flatness in edge of strip, the correction model of flatness measurement in edge of strip is established by analysis of the contact situation between strip and shapemeter roll. In case of transducer failure after long time running, the interpolation model of dummy segments is set. In addition, the transformation model of measured flatness from covered segments to several characteristic points is given so as to reduce complexity of data processing in flatness control system. The practical applications on the 1450 tandem cold mill show that this model is with excellent accuracy and provides a basis for flatness control.

Key words: Cold rolling, Flatness control, Flatness measurement, Shapemeter roll

CLC Number:

TG335.5

WANG Pengfei;ZHANG Dianhua;LIU Jiawei;WANG Junsheng;YU Xiaofeng. Research and Application of the Flatness Measurement Calculation Model on Cold Rolling Mill[J]. , 2011, 47(4): 58-65.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2011/V47/I4/58

[1]	CHEN Nan, XIAO Zihan, YU Chao, QI Zichen, REN Zhongkai, XIAO Hong. Modeling Method of Cold Rolling Compounding Process of Heterogeneous Metals and Analysis of Compounding Mechanism [J]. Journal of Mechanical Engineering, 2026, 62(6): 132-141.
[2]	LI Xiaohua, LI Xu, HAN Yuejiao, WANG Pengfei, ZHANG Dianhua, ZHANG Yong. Prediction and Regulation of Multi-pass Coupled Modeling for Cold Rolling of High-strength Strip Based on Genetic Inheritance of Property Inhomogeneity [J]. Journal of Mechanical Engineering, 2026, 62(4): 135-147.
[3]	CAO Jianguo, WANG Leilei, ZHANG Zhaoxiang, CAO Yuan, WANG Ben, GAO Bo. VCR Roll Contour Design and Shape Control Capability Based on Particle Swarm Optimization [J]. Journal of Mechanical Engineering, 2025, 61(8): 75-84.
[4]	WANG Xiaoyong, GAO Zhiying, XIN Yanli. Identification and Forecast of Cold Rolling Chatter Based on Recurrence Quantification Analysis [J]. Journal of Mechanical Engineering, 2023, 59(9): 137-145.
[5]	CHEN Yu, LIU Wen-wen, WANG Tao, SHEN Hong-zhuo, CHEN Ke, ZHANG Bin. Study on Influence Mechanism of Prefabricating Corrugation Process on Interface of Steel/Aluminum/Aluminum Alloy Laminated Plate [J]. Journal of Mechanical Engineering, 2023, 59(8): 74-82.
[6]	HUA Changchun, CHEN Jiaqiang, CHEN Jiannan, CHEN Shuzong. Adaptive Prescribed Performance Control for Torsional Vibration of Cold Rolling Mill with Disturbance Uncertainties [J]. Journal of Mechanical Engineering, 2021, 57(4): 202-209.
[7]	LI Hongbo, XIA Chunyu, ZHANG Jie, KONG Ning. Simulated and Experimental Study on Attenuation Process of the Surface Topography of Cold Rolling Work Rolls with Cellular Automaton [J]. Journal of Mechanical Engineering, 2020, 56(3): 207-215.
[8]	HUANG Huagui, WANG Jichao, LIU Wenwen, DU Fengshan. Analysis on Mechanical Properties of Stainless Steel Wire Mesh Reinforced Aluminum Composite Plate Fabricated by Cold Rolling [J]. Journal of Mechanical Engineering, 2018, 54(2): 125-130,137.
[9]	YANG Lipo, YU Huaxin, ZHANG Yongshun, LIU Hongmin. Shape Detection and Control System of Cold Rolling Strip Based on the Virtual Instrument and Its Industrial Application [J]. Journal of Mechanical Engineering, 2018, 54(14): 1-7.
[10]	YOU Yuan, LI Hongbo, XIA Chunyu, KONG Ning, ZHANG Jie, JIA Shenghui. Experimental and Mathematical Model Study of Attenuation Process of the Surface Roughness of Textured Work Rolls during Cold Rolling [J]. Journal of Mechanical Engineering, 2018, 54(12): 173-183.
[11]	ZAN Daqian, CHEN Yanxing, CHEN Jianjun, PAN Hongliang, WANG Zhengdong. Application of the XFEM to Predict the Edge Crack Propagation of Steel Sheet in the Cold Rolling Process [J]. Journal of Mechanical Engineering, 2017, 53(18): 79-86.
[12]	ZHANG Qingdong, ZHANG Yong, LI Rui, ZHANG Boyang. Simulation of the Rolling Wear of Work Roll Surface Asperities during Strip Cold Rolling by Discrete Element Method [J]. Journal of Mechanical Engineering, 2016, 52(6): 72-78.
[13]	DU Fengshan, YAN Meng, HUANG Huagui, CHEN Enping, LIU Feng, SUN Jingna. Development and Industry Application of High Speed ICP Shape Measuring Roll [J]. Journal of Mechanical Engineering, 2016, 52(4): 54-59.
[14]	WANG Xiaochen;YANG Quan;SUN Youzhao. Research on Comprehensive Optimization of Tandem Cold Rolling Setting Control System [J]. , 2014, 50(6): 39-47.
[15]	YANG Lipo;YU Bingqiang;LI Rongmin;LIU Hongmin;DU Changzheng. Compensation Model of Abnormal Signal and Shape Detection Error of Cold Rolling Strip [J]. , 2014, 50(6): 30-38.

Research and Application of the Flatness Measurement Calculation Model on Cold Rolling Mill

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments