New Ti-bearing High Strength Steel

Abstract

Abstract: A high strength steel with the yield strength above 700 MPa is developed successfully with the addition of titanium alloy element based on a low-carbon steel. The results show the strengthening factors of this steel are tiny and crisscross distributed precipitation of bainite and titanium carbide. When the volume fraction of bainite is greater than 70%, the yield strength of steel will be higher than 700 MPa, and simultaneously ratio of tensile to yield strength will be greater than 1.07, and good mechanical performance is obtained. As the bainites in the substrate are all tiny and crisscross lath banites, the plasticity of steel is improved, and the elongation is about 19%. By means of a transmission electron micrograph (TEM), it is observed that there are many tiny TiC precipitations and a few undissolved big TiC on the tiny bainite substrate. The tiny precipitations play the role of precipitation strengthening.

Key words: Bainite, High strength, Precipitation strength

CLC Number:

TG 115.21+3

YI Hailong;DU Linxiu;WANG Guodong;LIU Xianghua. New Ti-bearing High Strength Steel[J]. , 2008, 44(8): 50-54.

[1]	WANG Boshi, CHEN Nannan, CAI Yan, WANG Min. Low-temperature Fatigue Ductile-to-brittle Transition Behavior and Mechanism for Simulated Coarse-grained Heat-affected Zone of a High-strength Low-alloy Bainite Steel [J]. Journal of Mechanical Engineering, 2024, 60(6): 271-278.
[2]	CEN Yaodong, CHEN Lin, BAO Xirong, LI Xiaona. Bending Deformation and Microstructure Evolution of Bainite Rail during Cooling Process after Rolling [J]. Journal of Mechanical Engineering, 2024, 60(14): 139-152.
[3]	LIU Chengshang, CHEN Rui, LI Fang, WANG Meng, XU Wujiao. Parameters Determination of Hardening Model for Ultra-high Strength Steel Based on Modified Genetic Algorithm and Bending Spring Back Prediction [J]. Journal of Mechanical Engineering, 2024, 60(12): 240-249.
[4]	LUAN Xiaosheng, LIANG Zhiqiang, ZHAO Wenxiang, XIAO Shihong, ZHOU Tianfeng, WANG Xibin, LI Hongwei, LIU Xinli, LIU Zhenni. Microstructure Strengthening Mechanism of Surface Layer of Ultra-high Strength Steel by Thermal Assisted Ultrasonic Rolling [J]. Journal of Mechanical Engineering, 2023, 59(4): 34-42.
[5]	ZHOU Jianfei, GUO Ziqi, XU Shucai, SONG Jiafeng, ZOU Meng. Bio-lightweight and High Strength Structures and Their Bionic Applications in Energy Absorption Structures [J]. Journal of Mechanical Engineering, 2023, 59(4): 80-95.
[6]	SONG Yanli, LIU Yujian, FANG Zhiling, WANG Xiang, LU Jue, HUA Lin, LIU Peng, YAN Jianwen. Hot Stamping Technology and Application of Ultra-high Strength Steel Components [J]. Journal of Mechanical Engineering, 2023, 59(20): 154-178.
[7]	XU Yi, HU Xinyu, ZHANG Xueyu, HE Zhubin. Cold-hot Integrated Precision Bending of Ultra-high Strength Steel Welded Tube without Springback Compensation [J]. Journal of Mechanical Engineering, 2023, 59(13): 353-363.
[8]	XIE Dongxuan, ZHUANG Weimin, WANG Nan, SHI Hongda, WANG Pengyue, LIU Yang, CHEN Yanhong. Review on Hot Stamping Process and Equipment of High Strength Steel Sheet [J]. Journal of Mechanical Engineering, 2022, 58(20): 319-338.
[9]	LI Wei, QIN Yuman, LI Yanguo, ZHANG Ming, YANG Zhinan, ZHANG Fucheng, YOU Leilei, LONG Xiaoyan. Effect of Heat Treatment on Surface Microstructure and Properties of Nano Bainitic Carburized Bearing Steel [J]. Journal of Mechanical Engineering, 2021, 57(4): 63-72.
[10]	CHEN Zhenhao, XU Jun, LIU Qingdong, LI Chuanwei, GU Jianfeng. Simulation and Computation of Isothermal Precipitation Kinetics and Precipitation Strengthening for AA6061 Aluminum Alloy [J]. Journal of Mechanical Engineering, 2021, 57(20): 126-132.
[11]	ZHANG Chaohua, WANG Xiaoxia, CHANG Maochun, WANG Hu, YE Yanhong, DENG Dean. Effects of Yield Strength of Weld Metal and Material Strain Hardening on Prediction Accuracy of Welding Residual Stress and Deformation in a Q345 Steel Joint [J]. Journal of Mechanical Engineering, 2021, 57(10): 160-168.
[12]	WEI Wenjie, HE Xiaocong, ZHANG Xianlian, LU Jiawei. Characteristics of Fretting Damage in Hybrid DP780/AA6061 Self-piercing Riveted Joints [J]. Journal of Mechanical Engineering, 2020, 56(6): 169-175.
[13]	YANG Chao, WANG Yingjun, XU Yanli, CAI Jing, YU Baohai, NI Dingrui. Microstructure and Mechanical Properties of TIG and Friction Stir Welded Joints of Sc-contained High Strength Aluminum Alloy Sheet [J]. Journal of Mechanical Engineering, 2020, 56(6): 221-228.
[14]	ZHOU Bingying, SHAO Jian, HE Anrui, SI Xiaoming, CUI Yuxuan, WEN Chengcai. Lateral Bending and Stress Redistribution of High Strength Steel Strip after Longitudinal Slitting [J]. Journal of Mechanical Engineering, 2020, 56(18): 43-50.
[15]	HAN Fei, LI Rongjian. Springback Law of Ultra High Strength Steel in Multiple Stands Roll Forming Process [J]. Journal of Mechanical Engineering, 2019, 55(2): 73-81.

New Ti-bearing High Strength Steel

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments