RESEARCH ON THE FORMING MECHANISM OF SURFACE MACHINED BY ORTHOGONAL TURN-MILLING

›› 2004, Vol. 40 ›› Issue (9): 121-124.

• Article • Previous Articles Next Articles

RESEARCH ON THE FORMING MECHANISM OF SURFACE MACHINED BY ORTHOGONAL TURN-MILLING

Jiang Zenghui;Jia Chunde

Engineering Technology Center for High Speed Machining, Shenyang Institute of Technology

Published:2004-09-15

Abstract

Abstract: The forming mechanism of surface machined by orthogonal turn-milling is researched on detailedly through mathematical method. The calculating method of workpiece’s theoretical micro-roundness and the mathematical expression of workpiece’s side generatrix are given. The influence of the main cutting parameters on the theoretical micro-roundness and the workpiece’s side generatrix is analyzed, and the scale of eccentricity and axial feed is expounded detailedly when machining the cylinder surface.

Key words: Axial feed, Eccentricity, Orthogonal turn-milling, Side generatrix

CLC Number:

TG501

Jiang Zenghui;Jia Chunde. RESEARCH ON THE FORMING MECHANISM OF SURFACE MACHINED BY ORTHOGONAL TURN-MILLING[J]. , 2004, 40(9): 121-124.

[1]	XIAO Yuting, WU Xiaofeng, CAI Yaojie, WEN Donghui. Numerical Simulation on Uniformity of Plane Lapping with Irrational Swinging Method [J]. Journal of Mechanical Engineering, 2021, 57(13): 232-241.
[2]	ZHOU Shengtong, ZHU Jingwei, XIAO Qian, GUO Weinian, ZHOU Xinjian. Initial Static Eccentricity and Gravity Load on Rotor Orbit of EMU Traction Motor [J]. Journal of Mechanical Engineering, 2020, 56(17): 145-154.
[3]	XU Fangcheng, HOU Liukai, WU Bin. Performance of Thrust Foil Bearings with Nonlinear Foil Stiffness Model [J]. Journal of Mechanical Engineering, 2020, 56(15): 198-206.
[4]	CHEN Lei. Deflection Calculation of Curved Eccentricity in Large Induction Motor [J]. Journal of Electrical Engineering, 2019, 14(2): 47-54.
[5]	LI Jing, GAO Huayu, SHEN Nanyan, DENG Yang, YAN Junfan. Tracing Measurement Method for Non-circular Contour of Complex Shafts [J]. Journal of Mechanical Engineering, 2018, 54(5): 38-46.
[6]	HU Donghai, YAN Yanzhi. Analysis of Nonlinear Torsional Vibration Characteristics of EV Powertrain Considering Rotor Eccentricity of PMSM [J]. Journal of Mechanical Engineering, 2018, 54(22): 128-136.
[7]	Xiaohua Bao,Zhiheng Cheng. Eccentricity Fault Diagnosis Based on Dual Signal Analysis in Large Submersible Motor [J]. Journal of Electrical Engineering, 2016, 11(7): 23-31.
[8]	LUO Minqiang, DING Kang, YANG Zhijian. A Research on the Effect of Encoder Eccentricity on Torsional Vibration Test [J]. Journal of Mechanical Engineering, 2016, 52(21): 104-119.
[9]	ZHANG Yongshun, WANG Lvhua, CHENG Cunxin, CHI Minglu, BAI Jianwei. Petal Shape Optimization of a Capsule Robot with Multiple Wedge Effects [J]. Journal of Mechanical Engineering, 2015, 51(7): 45-52.
[10]	LIU Tao, CUI Huibao, CHEN Gang. Analysis of Roll Eccentricity Signal in Strip Cold Rolling Process [J]. Journal of Mechanical Engineering, 2015, 51(6): 104-108.
[11]	REN Zhaohui, XIE Jixiang, ZHOU Shihua, WEN Bangchun. Vibration Characteristic Analysis of Helical Gear-rotor-bearing System with Coupled Lateral-torsional-axial [J]. Journal of Mechanical Engineering, 2015, 51(15): 75-89.
[12]	LIU Can;WU Jingquan;LI Guanghui;TAN Guangyu. Identification of Mills Eccentricity Based on Peak Force of Single Edge [J]. , 2013, 49(1): 185-190.
[13]	LIU Xianbo;LONG Xinhua;MENG Guang;GUO Zhiming. The Identifications of Milling Force Coefficients and Eccentricity Based on Multi-objective Optimization in Frequency-domain [J]. , 2011, 47(7): 185-190.
[14]	ZHU Lida;WANG Wanshan;LI He;YU Tianbiao. Research on 3D Chatter Stability of Orthogonal and Eccentric Turn-milling [J]. , 2011, 47(23): 186-192.
[15]	ZHOU Chao;TANG Jinyuan;ZENG Tao;LU Yanfeng. Relationship between Grinding Wheel and Tooth Surface Error [J]. , 2008, 44(2): 94-101.

RESEARCH ON THE FORMING MECHANISM OF SURFACE MACHINED BY ORTHOGONAL TURN-MILLING

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments