MICROFORMING OF SUPERPLASTIC Zn-Al22 ALLOY

Abstract

Abstract: Research on microforming of fine grained superplastic Zn-Al22 alloy is carried out by means of superplastic forming. With the selected material, microformability tests are carried out by using two kinds of stainless steel dies：one with micro-cavity, the other with micro-channel. The results are evaluated with the developed evaluation method. Haracteristics of micro-formabi-lity of the material are clarified with micro-extrusion tests. Effec-ts of lubrication, press and die structure on forming are analy-sed. SEM is used to analyse surface topograph of the formed specimens.

Key words: Extrusion, Micro-forming, Superplasticity, Zn-Al22 alloy

CLC Number:

TG376.2

Zhang Kaifeng;Wang Changli. MICROFORMING OF SUPERPLASTIC Zn-Al22 ALLOY[J]. , 2004, 40(5): 82-86.

[1]	ZHANG Guangdong, HUANG Xiang. Analytical Solution of Flow Balance Coefficient at the Outlet of Slit-combined Channel in Polymer Extrusion Process [J]. Journal of Mechanical Engineering, 2024, 60(12): 259-267.
[2]	MU Yingpeng, LIU Fuchu, ZHANG Chi, HUANG Jiefei, LIU Xin, HAN Guangchao, FAN Zitian, XU Feng. Parameter Optimization and Surface Accuracy Control of Water Soluble Calcia Ceramic Core Prepared by Extrusion 3D Printing Technology [J]. Journal of Mechanical Engineering, 2024, 60(1): 170-178.
[3]	ZHANG Guang-dong, HUANG Xiang. Optimization Design Method of Plastic Extrusion Die for Product Geometric Accuracy [J]. Journal of Mechanical Engineering, 2023, 59(8): 142-150.
[4]	ZHANG Zhimin, LI Guojun, WANG Qiang, YU Jianmin, XUE Yong, CHEN Zhe. Multi-directional Loading Rotary Extrusion Forming Technology and Equipment [J]. Journal of Mechanical Engineering, 2023, 59(12): 264-271.
[5]	DONG Lanlan, LI Gen, XIONG Yinze, ZHANG Hang, WANG Lei, LI Xiang. Extrusion 3D Printing Processes and Performance Evaluation of GelMA/LPN/MC Hydrogel [J]. Journal of Mechanical Engineering, 2022, 58(9): 283-290.
[6]	JIANG Shijie, CHEN Pifeng, HU Ke, ZHAN Yang, LI Changyou. Theoretical and Experimental Study on the Bonding Neck of Fused Filament Fabrication Parts [J]. Journal of Mechanical Engineering, 2022, 58(9): 291-297.
[7]	LIU Tengda, TANG Lei, SUN Changning, SHAN Cunqing, LI Dichen, TIAN Xiaoyong, LIU Chaozong, WANG Ling. Z-direction Enhancing Manufacturing Strategy for 3D Printing Prosthetic Socket of Continuous Fiber Composite [J]. Journal of Mechanical Engineering, 2022, 58(7): 267-275.
[8]	DENG Wen-jun, CENG Yu-ning, ZHOU Zi-han. New Process and Mechanism for Preparing Gradient Structural Aluminum Strip by Extrusion-machining [J]. Journal of Mechanical Engineering, 2022, 58(5): 278-288.
[9]	YU Jun, CHEN Wanji, XU Jie, SHAN Debin, GUO Bin. Deformation Behavior of Electrically-assisted Micro-tension in Ultrafine-grained Magnesium Alloy [J]. Journal of Mechanical Engineering, 2022, 58(16): 68-76.
[10]	WANG Hui, CHEN Liang, LI Zhigang, ZHAO Guoqun, ZHANG Cunsheng. Study on Joining between Si₃N₄/Al Composite and Aluminum Alloys Based on Porthole Die Co-extrusion Process [J]. Journal of Mechanical Engineering, 2022, 58(16): 89-99.
[11]	YU Tao, LI Feng, GAO Lei, DU Huaqiu, WANG Ye. Effect of Annealing Treatment on the Inter-facial Structure and Magnesium Side Microstructure of Mg/Al Alloy Thick-directional Bonded Plate [J]. Journal of Mechanical Engineering, 2022, 58(16): 100-109.
[12]	TANG Yong, WANG Zhiwei, CHEN Gong, ZHANG Shiwei, YUAN Wei. Research on Critical Technologies of Low-cost Cold Precision Extrusion of Cycloidal Gear [J]. Journal of Mechanical Engineering, 2022, 58(14): 154-160.
[13]	DENG Tiesong, XIAO Xinbiao, SHENG Xiaozhen. Research on Vibro-acoustics of Aluminium Extrusions from a High-speed Train Body Based on Two-and-half Dimensional Finite Element/Boundary Element Method [J]. Journal of Mechanical Engineering, 2022, 58(1): 97-107.
[14]	XU Ningning, SUN Chaoyang, QIAN Lingyun, NI Kezhi, CAI Wang. Solution Model of Principal Stress Method for Torsion-extrusion Forming Load of Magnesium Alloy Plate [J]. Journal of Mechanical Engineering, 2021, 57(4): 73-82.
[15]	BAO Jianxing, XU Jie, QU Jiazheng, BAI Jianan, SHAN Debin, GUO Bin. Electrically-assisted Micro-forming Process of Gear Structure in TA15 Titanium Alloy [J]. Journal of Mechanical Engineering, 2021, 57(1): 210-216.

MICROFORMING OF SUPERPLASTIC Zn-Al22 ALLOY

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments