REVIEW OF THEORY, KEY TECHNOLOGIES AND ITS APPLICATION OF MODULAR PRODUCT DESIGN

Abstract

Abstract: As an important approach to realize MC and AM, modular product design can produce more variety of products with limited resources by combination of different modules. Such method is viewed as a goal of good design practice in current engineering. However, it is not received sufficient attention in the literature, and most solutions are proposed at an abstract level. The literature on modular product design focusing on definitions, methodologies, key technologies and its application is reviewed. Finally, some focused research issues on modular product design are formulated.

Key words: Agile manufacturing(AM), Mass customization(MC), Modular product, Module, Product family

CLC Number:

TP391.7

Hou Liang;Tang Renzhong;Xu Yanshen. REVIEW OF THEORY, KEY TECHNOLOGIES AND ITS APPLICATION OF MODULAR PRODUCT DESIGN[J]. , 2004, 40(1): 56-61.

[1]	SHEN Junxian, MA Tianchi, SONG Di, XU Feiyun. Crack Damage Detection of Centrifugal Fan Blades Based on Interpretable Ensemble Selection Framework [J]. Journal of Mechanical Engineering, 2024, 60(12): 183-193.
[2]	WU Zhipeng, GAO Dedong, WANG Shan, WEI Xiaoxu, SHAO Mingxi, XIN Yuanqing. A Review on Recycling Technology of End-of-life Crystalline Silicon Photovoltaic Modules [J]. Journal of Mechanical Engineering, 2023, 59(7): 307-329.
[3]	GAO Zhigang, SHANG Xiaolong, ZHENG Dawen, WANG Tianhu, LI Peng, BAI Junhua. Heat Transfer Characteristics Analysis of Microchannel Heat Sink on Power Module with Non-uniform Heating Dissipation [J]. Journal of Mechanical Engineering, 2023, 59(4): 257-264.
[4]	Kuijie Li, Yalun Li, Xinyu Rui, Yuancheng Cao, Liyun Fan, Xuning Feng. Experimental Study on the Effect of State of Charge on Failure Propagation Characteristics within Battery Modules^* [J]. Chinese Journal of Electrical Engineering, 2023, 9(3): 3-14.
[5]	LI Da, ZHENG Haixing, ZHANG Jianrui, WU Chaohui WENG Junhua, JIANG He, XIAO Wen. Research on PID Effect and PID Repair of PV Module on Site [J]. Journal of Electrical Engineering, 2023, 18(2): 254-259.
[6]	ZHU Xingyu, CHEN Qianhong, ZHANG Bin, LIU Lidong. Analysis of Parallel Output Characteristics of Dynamic IPT System and Design Method of Current Sharing Parameters [J]. Journal of Electrical Engineering, 2023, 18(2): 70-77.
[7]	WANG Teng, LI Feng, LUO Ling, TANG Baoping. Life State Recognition of Space Rolling Bearings Based on Dual Scale Flexible Prototype Transfer Network [J]. Journal of Mechanical Engineering, 2022, 58(21): 114-125.
[8]	LI Changlong, CUI Naxin, CHANG Long, ZHANG Chenghui. Modeling and Inconsistency Analysis of Parallel-connected Battery Module with Forced-air Cooling [J]. Journal of Mechanical Engineering, 2022, 58(12): 168-179.
[9]	LIU Yandong, HU Yiwen, CHEN Nan, WANG Jingyue, SHAO Xinming, PEI Zhongchen, LIU Chuang. Study on Power Optimization Method and Coordinated Control Strategy of Optical Storage Microgrid [J]. Journal of Electrical Engineering, 2022, 17(1): 22-30.
[10]	LI Yupeng, XIE Weixing, WANG Xiaolin, REN Haibing. Module Partition Method for Complex Products Considering the Change Risk [J]. Journal of Mechanical Engineering, 2021, 57(9): 191-202.
[11]	GAO Pu, LIU Hui, XIANG Changle, YAN Pengfei. Study on Torsional Isolator and Absorber Comprehensive Vibration Reduction Technology for Vehicle Powertrain [J]. Journal of Mechanical Engineering, 2021, 57(14): 244-252.
[12]	TIAN Dake, LIU Rongqiang, YANG Xieliu, DENG Zongquan. Deployment Accuracy Measurement and Analysis of Truss Structure for Modular Space Deployable Truss Antenna [J]. Journal of Mechanical Engineering, 2020, 56(5): 63-71.
[13]	Puqi Ning, Huakang Li, Yunhao Huang, Yuhui Kang. Review of Power Module Automatic Layout Optimization Methods in Electric Vehicle Applications^* [J]. Chinese Journal of Electrical Engineering, 2020, 6(3): 8-24.
[14]	Haidong Yan, Peijie Liang, Yunhui Mei, Zhihong Feng. Brief Review of Silver Sinter-bonding Processing for Packaging High-temperature Power Devices^* [J]. Chinese Journal of Electrical Engineering, 2020, 6(3): 25-34.
[15]	Fujin Deng, Yongqing Lü, Chengkai Liu, Qian Heng, Qiang Yu, Jifeng Zhao. Overview on Submodule Topologies, Modeling, Modulation, Control Schemes, Fault Diagnosis, and Tolerant Control Strategies of Modular Multilevel Converters^* [J]. Chinese Journal of Electrical Engineering, 2020, 6(1): 1-21.

REVIEW OF THEORY, KEY TECHNOLOGIES AND ITS APPLICATION OF MODULAR PRODUCT DESIGN

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments