| [1] |
LIU Yunhai, ZHENG Duyuan, ZHU Xiaohua.
Simulation of Erosion Behavior and Mechanism of Buffer Elbow in Fracturing Manifold Based on CFD-DPM-MD
[J]. Journal of Mechanical Engineering, 2026, 62(1): 296-309.
|
| [2] |
ZHANG Pengfei, AN Chenhui, LI Wenjun, FENG Kai.
Overview and Prospect on Ground Effect Simulation Technology of Aircraft and Vehicles
[J]. Journal of Mechanical Engineering, 2025, 61(9): 314-334.
|
| [3] |
ZHOU Dekai, PAN Ao, LIU Junmin, LI Pengchun, SHAO Tianshuang, CUI Lidong, LI Longqiu.
Application Status and Prospect of the Technology for the Moving Belt Floor in Wind Tunnel
[J]. Journal of Mechanical Engineering, 2025, 61(18): 313-329.
|
| [4] |
LI Yanle, XU Tongming, LI Fangyi, LI Jianfeng, LU Haiyang, DU Jiyu, QI Xiaoxia.
Erosion Wear Behavior of Cr3C2-kNiCr Coating under Multi-angle Impact
[J]. Journal of Mechanical Engineering, 2023, 59(13): 343-352.
|
| [5] |
MA Pengcheng, TANG Zhiguo, LIU Qingqing, WANG Yuanzhe.
Numerical Simulation of Characteristic of Heat Transfer for Jet Impingement with New Single Cone Heat Sink through Single Spray Nozzle
[J]. Journal of Mechanical Engineering, 2016, 52(24): 136-141.
|
| [6] |
ZHANG Longxin, WANG Songtao, LIU Xun, DING Jun, WANG Zhongqi.
Effect of Combination of Active and Passive Flow Control Methods on the Flow Structures and Loss of a Highly-loaded Compressor Cascade
[J]. Journal of Mechanical Engineering, 2016, 52(22): 161-167.
|
| [7] |
LI Guolu, LI Nannan, WANG Haidou, KANG Jiajie.
Research on Surface Free Energy and Erosion Wear Property of Al2O3-13%TiO2 Coatings Prepared by Different Spraying Processes
[J]. Journal of Mechanical Engineering, 2016, 52(10): 59-66.
|
| [8] |
WANG Chao, WANG Gang, DING Hongbing.
Analysis of Thermal Boundary Layer of Thermal Effects on Flow Characteristics of Small Sonic Nozzles
[J]. Journal of Mechanical Engineering, 2015, 51(16): 164-170.
|
| [9] |
CHEN Shaowen;SUN Shijun;LAN Yunhe;ZHOU Zhihua;WANG Songtao.
Numerical Investigations on Effects of Inlet Boundary Layer Characteristics on Aspirated Compressor Cascade
[J]. , 2014, 50(24): 158-163.
|
| [10] |
JIANG Yuting;ZHENG Qun;GAO Jie;DENG Qingfeng;WANG Wei.
Research on Mist/Air Cooling Performance of Transonic High Pressure Turbine Stator
[J]. , 2013, 49(16): 131-137.
|
| [11] |
JI Shiming;CHI Yongwei;TAN Dapeng.
Research of Abrasive Injection Process to the Wall and Machining Characteristic of Soft Abrasive Flow Machining
[J]. , 2012, 48(13): 174-183.
|
| [12] |
CHEN Shaowen;WANG Songtao;WANG Zhongqi.
Numerical Investigations on Separation in Highly-loaded Aspirated Compressor Cascade at Positive Incidences
[J]. , 2011, 47(20): 177-182.
|
| [13] |
SUN Ang;MA Wenqi;WANG Zuwen.
Characteristics of Subsonic Velocity Field of Externally Pressurized Gas Thrust Bearings
[J]. , 2010, 46(9): 113-119.
|
| [14] |
LIU Kui;YUAN Weizheng;ZHONG Junwei;DENG Jinjun;JIANG Chengyu.
Experiments of Low Speed Fluid Boundary-layer Separation
[J]. , 2008, 44(1): 139-143.
|
| [15] |
LIU Lili;DENG Jianxin;DING Mingwei.
STRESS ANALYSIS AND FGM MODELS DESIGN OF ABRASIVE JET MACHINING NOZZLE
[J]. , 2006, 42(增刊): 157-160.
|