[1] |
FENG Jingyang, WEI Zhaocheng, WANG Minjie, SHU Xin, ZHANG Yong, YONG Jianhua.
Research on Cutter Path Generation for 5-Axis U Cycloid Milling Based on Dimension Reduction Mapping
[J]. Journal of Mechanical Engineering, 2024, 60(5): 362-377.
|
[2] |
MA Feng, HUANG Shunhu, LIU Peiji, ZHANG Hua.
Multi-objective Optimization Method of CFRP Drilling Process Parameters for Power and Drilling Quality
[J]. Journal of Mechanical Engineering, 2023, 59(11): 290-299.
|
[3] |
YANG Yun, ZHU Mengrui, LI Huimin, DU Zhengchun, YANG Jianguo.
Volumetric Error Modelling and Compensation for Batch of Vertical Machining Centers Based on Sensitivity Analysis
[J]. Journal of Mechanical Engineering, 2020, 56(7): 204-212.
|
[4] |
LIU Xianli, FAN Mengchao, JI Wei, WANG Guangyue, ZHAO Zemin.
Ellipsoid End Mill Design and Tool Path Generation Algorithm
[J]. Journal of Mechanical Engineering, 2018, 54(15): 199-212.
|
[5] |
LI Li, DENG Xingguo, SHANG Chuanbo.
Tool Path Optimization with High-efficiency and Low Energy Consumption for Surface CNC Machining
[J]. Journal of Mechanical Engineering, 2017, 53(11): 184-194.
|
[6] |
MA Feng, ZHANG Hua, CAO Huajun.
Multi-objective Machining Parameters Optimization for Low Energy and Minimum Cutting Fluid Consumption
[J]. Journal of Mechanical Engineering, 2017, 53(11): 157-163.
|
[7] |
YAN Wei, ZHANG Hua, JIANG Zhigang.
A Multi-source and Dynamic Energy Modeling Method of Machining Tools Based on BPMN and its Application
[J]. Journal of Mechanical Engineering, 2017, 53(11): 195-202.
|
[8] |
ZHOU Yulong.
Research on Feedrate Control of Five-axis Based on Non-linear Error
[J]. , 2014, 50(7): 209-212.
|
[9] |
XU Rufeng;CHEN Zhitong.
Method of Five-axis Tool Radius Compensation Based on Post-processor
[J]. , 2014, 50(13): 157-164.
|
[10] |
LI Congbo;CUI Longguo;LIU Fei;LI Li.
Multi-objective NC Machining Parameters Optimization Model for High Efficiency and Low Carbon
[J]. , 2013, 49(9): 87-96.
|
[11] |
ZHOU Bo;ZHAO Jibin;LIU Weijun.
Method Study on Optimization of Tool Axis Vector for Complex Surface of 5-Axis CNC
[J]. , 2013, 49(7): 184-192.
|
[12] |
LIANG Xinguang;YAO Zhenqiang.
Dynamic-based Simulation for Machined Surface Topography in 5-axis Ball-end Milling
[J]. , 2013, 49(6): 171-178.
|
[13] |
ZHOU Bo;ZHAO Jibin;LIU Weijun;LI Lun.
Processing Calculation Method of 5-axis NC Spiral Trajectory Based on Parametric Surface Mapping
[J]. , 2013, 49(5): 100-109.
|
[14] |
GENG Cong;YU Dong;ZHANG Han.
Tool Orientation Smooth Interpolation Algorithm for Five-axis CNC Machining
[J]. , 2013, 49(3): 180-185.
|
[15] |
CAI Yonglin;ZHAO Mingbo;WANG Heng.
Tool Path Planning of NC Machining for Surface Similar to Revolution Body
[J]. , 2013, 49(21): 38-43.
|