| [1] |
JIANG Chen, GAO Rui, ZHENG Zexi.
Molecular Dynamics Simulation and Experimental Investigation of Mechanical Cleavage of GaAs
[J]. Journal of Mechanical Engineering, 2023, 59(5): 317-324.
|
| [2] |
ZHANG Guodong, ZHANG Peng, GAO Jianshi, YU Huai, YUAN Hong, DING Ning, XIONG Huaping.
Microstructure and Mechanical Properties of TC11 Titanium Alloy Fabricated by Wire-feed Electron Beam Additive Manufacturing
[J]. Journal of Mechanical Engineering, 2023, 59(4): 105-112.
|
| [3] |
MU Zhenkai, ZHAO Jun, YU Gaochao, HUANG Xueying, SUN Honglei.
Determination Methods of Anisotropic Coefficient R-values of Sheet Metal and Its Evolution in Subsequent Yielding
[J]. Journal of Mechanical Engineering, 2022, 58(6): 91-100.
|
| [4] |
LIU Qing-shan, LAN Feng-chong, CHEN Ji-qing, CENG Chang-jing, WANG Jun-feng.
Effect of Pore Characteristics and Anisotropy of Porous Layer on the Transient Performance of Fuel Cell
[J]. Journal of Mechanical Engineering, 2022, 58(22): 90-105.
|
| [5] |
WANG Peng, ZHOU Junyuan, LI Hongwei, XIANG Zhiyu.
Simulation of the Premium Threaded Connections Deformation under Cyclic Loading by Considering the Bauschinger Effect
[J]. Journal of Mechanical Engineering, 2022, 58(16): 21-32.
|
| [6] |
REN Zhiying, FANG Rongzheng, CHEN Xiaochao, SHEN Liangliang, BAI Hongbai, LIN Youxi.
Study on Anisotropic Constitutive Properties of Metal Rubber Based on Virtual Fabrication Technology
[J]. Journal of Mechanical Engineering, 2021, 57(24): 211-222.
|
| [7] |
WANG Hui, PAN Yongzhi, FU Xiuli, MEN Xiuhua, ZHANG Zewen.
Dislocation Density and Its Evolution of Aluminum Alloy 7050 Based on Anisotropy
[J]. Journal of Mechanical Engineering, 2021, 57(18): 164-171.
|
| [8] |
LI Qun, JIN Miao, ZOU Zongyuan, GUO Jia, YANG Cong.
Parameter Determination and Application Research of Mixed Hardening Model Based on Cyclic Tension-compression Test
[J]. Journal of Mechanical Engineering, 2020, 56(2): 63-68.
|
| [9] |
WANG Haibo, MEN Mingliang, YAN Yu, LI Qiang, WAN Min, HE Dong.
Accurate Analysis of Anisotropic Deformation Behavior of 5754O Aluminum Alloy Sheet under Proportional/Non-proportional Loading Paths
[J]. Journal of Mechanical Engineering, 2018, 54(24): 77-87.
|
| [10] |
DING Zhiping, HUANG Dayong, RONG Jigang, HUANG Youjian, ZENG Jiaxing.
Predicting Method of Anisotropic Elastic Constants for Injection Molded Short Glass Fiber Reinforced Composites
[J]. Journal of Mechanical Engineering, 2017, 53(24): 126-134.
|
| [11] |
ZHANG Qingling, JIN Miao, ZHANG Hongsheng, DONG Hao, ZOU Zongyuan.
Experiment Research on Material Characteristics of Q235 under Small Deformation Cyclic Loading
[J]. Journal of Mechanical Engineering, 2017, 53(20): 69-76.
|
| [12] |
DING Zhiping, LI Fei, BU Jiling, HUANG Youjian, HUANG Dayong.
Mullins Induced Anisotropy and Multi-directional Stiffness Prediction of Rubber Elastic Components
[J]. Journal of Mechanical Engineering, 2017, 53(14): 144-149.
|
| [13] |
LANG Genfeng;;LIN Jing;;LIAO Yuhe.
Phase Compensation Method of Holobalancing
[J]. , 2014, 50(22): 16-21.
|
| [14] |
LIU Shengjing;XU Yongchao;JIANG Bo;LEI Hailong;CHEN Fulong.
Mechanical Analysis for Superplastic Free Bulging Based on Ellipsoidal Surface
[J]. , 2014, 50(18): 73-81.
|
| [15] |
SHI Zhaoyao;ZHANG Hua;TANG Jie.
On the Anisotropy of Surface Measurement
[J]. , 2014, 50(18): 1-6.
|
