| [1] |
CHEN Junjie, TANG Yuzhou, YANG Shujun, WU Mingyu.
Constitutive Model of Anisotropic Hyper-viscoelasticity for Double-layer Cord Reinforced Air Spring Rubber Bellows
[J]. Journal of Mechanical Engineering, 2026, 62(8): 49-59.
|
| [2] |
ZENG Xiangxu, LI Zhaoqing, ZHANG Zhengyan, LI Yipeng, LIN Kun, YANG Xiao.
Effect of Processing Parameters on Microstructure and Macroscopic Properties of Ni-Ti Alloys Fabricated by Selective Laser Melting
[J]. Journal of Mechanical Engineering, 2026, 62(3): 203-217.
|
| [3] |
LI Xia, WU Lei, WEN Zefeng, JIN Xuesong, WANG Anbin.
Study on the Rail Corrugation at Weld Joint of Steel Spring Floating Slab Track II:Formation Mechanism
[J]. Journal of Mechanical Engineering, 2025, 61(6): 260-267.
|
| [4] |
LIANG Dong, HAN Zhiqiang, SONG Yimin, CHANG Boyan.
Stiffness Modelling and Performance Evaluation of a Large Loading SCARA Parallel Robot
[J]. Journal of Mechanical Engineering, 2025, 61(21): 213-226.
|
| [5] |
ZHAN Lihua, ZHAO Shuai, YANG Youliang, CHEN Zanchong, XIE Hao, LIU Changzhi, YAN Dongyang.
High Precision and Rapid Springback Prediction for Creep Forming of Ribbed Panel Based on SPSO-BP Neural Network
[J]. Journal of Mechanical Engineering, 2025, 61(20): 81-90.
|
| [6] |
YANG Yifan, CHEN Shiqian, WANG Kaiyun, XIAO Feixiong, MA Chengxiang.
Fracture Cause Research and Structural Optimization for the Heavy-Haul Locomotive Coil Spring Based on Modal Resonance Theory
[J]. Journal of Mechanical Engineering, 2025, 61(2): 247-256.
|
| [7] |
CHEN Zhaowei, WANG Lang, LI Shihui, YUAN Miao, PU Qianhua, YANG Jizhong, CHEN Zhihui.
Study on Reliability of Rack System on Super-slope Bridge of Rack Railway under Extreme Temperature Load
[J]. Journal of Mechanical Engineering, 2025, 61(18): 267-277.
|
| [8] |
QI Yutong, SUN Chuyan, LI Shuhui.
Study on the Deformation Behavior and Springback Prediction of 7075 Aluminum Alloy at Cryogenic Temperature
[J]. Journal of Mechanical Engineering, 2025, 61(14): 99-107.
|
| [9] |
WU Fangxing, YANG Guang, WANG Qiliang, FAN Xiaobo.
Research on Springback of Aluminum Alloy Spherical Shell at Gradient Cryogenic Temperature
[J]. Journal of Mechanical Engineering, 2025, 61(14): 108-116.
|
| [10] |
MA Xinwen, PENG Xianghua, SUN Jingwei, CHEN Yan.
Investigation of Aeroelastic Coupling Method for Swept Blade Based on Modification of Blade Element Momentum Theory
[J]. Journal of Mechanical Engineering, 2025, 61(14): 273-284.
|
| [11] |
ZHOU Jiechen, LIU Jianhua, XIA Huanxiong, ZHANG Xiumin, ZHAO Yuxi, MENG Junfeng.
Modeling and Surface-figure Analysis of Bonding Assembly of a Spatial Reflector
[J]. Journal of Mechanical Engineering, 2025, 61(13): 255-264.
|
| [12] |
XU Fengyu, MA Kaiwei, SONG Julong, FAN Baojie, WU Xinjun.
Vibration Reduction Mechanism and Control Method of Cable Climbing Robot Based on Spring-magnetorheological Damper
[J]. Journal of Mechanical Engineering, 2024, 60(8): 384-395.
|
| [13] |
ZHENG Xuebin, HAN Longshuai, LI Xuetao, E Hongwei, WU Xiangdong, WAN Min.
Study on Influencing Factors of U-bending Springback Prediction of DP780 Dual-phase Steel
[J]. Journal of Mechanical Engineering, 2024, 60(6): 197-206.
|
| [14] |
FENG Qingsong, YANG Zhou, GUO Wenjie.
Low Frequency Vibration Control of Periodic Steel Spring Floating Slab Track Based on Amplitude Amplification Mechanism
[J]. Journal of Mechanical Engineering, 2024, 60(3): 155-169.
|
| [15] |
CHEN Junjie, LIU Chen, QIU Guangqi.
Dynamics Modeling and Sensitivity Analysis of Throttling Pipe Air Damping Air Spring under Turbulent Flow Effect
[J]. Journal of Mechanical Engineering, 2024, 60(23): 205-215.
|