INTERFERENCE-FREE TOOL PATH PLANNING IN MACHINING OF SCULPTURED SURFACES WITH A FLAT-END CUTTER

›› 1998, Vol. 34 ›› Issue (1): 75-81.

Li Qiongyan;Lu Jilian

CLC Number:

Li Qiongyan;Lu Jilian. INTERFERENCE-FREE TOOL PATH PLANNING IN MACHINING OF SCULPTURED SURFACES WITH A FLAT-END CUTTER[J]. , 1998, 34(1): 75-81.

[1]	DENG Jianxin, YUAN Bangyi, HUANG Qiulin, DING Dukun, XIN Manyu, LIU Guangming. Review on the Key Technologies of Complex Surfaces Polishing Based on Robots [J]. Journal of Mechanical Engineering, 2024, 60(7): 1-21.
[2]	ZHOU Yulong. Research on Feedrate Control of Five-axis Based on Non-linear Error [J]. , 2014, 50(7): 209-212.
[3]	CAI Yonglin;ZHAO Mingbo;WANG Heng. Tool Path Planning of NC Machining for Surface Similar to Revolution Body [J]. , 2013, 49(21): 38-43.
[4]	LUO Ming;WU Baohai;LI Shan;ZHANG Dinghua. Five-axis Tool Orientation Optimization Based on Kinematical Method [J]. , 2009, 45(9): 158-163.
[5]	WU Baohai;LUO Ming;ZHANG Ying;LI Shan;ZHANG Dinghua. Advances in Tool Path Planning Techniques for 5-axis Machining of Sculptured Surfaces [J]. , 2008, 44(10): 9-18.
[6]	WANG Taiyong;ZHANG Zhiqiang;WANG Tao;XU Aifen;HU Shiguang;ZHAO Li. HIGH PRECISION TOOL PATH PLANNING ALGORITHM FOR COMPLEX PARAMETRIC SURFACE [J]. , 2007, 43(12): 109-113.
[7]	SUN Yuwen;WANG Haixia;LIU Weijun;WANG Yuechao. PARAMETRIC METHOD FOR KINEMATIC PATH GENERATION FROM MANIFOLD MESHES [J]. , 2006, 42(8): 84-88.
[8]	Gong Hu;Cao Lixin;Liu Jian. GLOBAL OPTIMIZATION OF POSITIONING STRATEGY FOR NC FLANK MILLING UNDEVELOPABLE RULED SURFACES [J]. , 2005, 41(11): 134-139.

Knowledge