DEVELOPMENT OF A NEW TYPE SUBMERGED ARC AGGLOMERATED FLUX WITH CaF2-MgO-CaO-AI2O3 SLAG SYSTEM USED FOR THE WELDING OF HIGH STRENGTH STEEL

›› 1998, Vol. 34 ›› Issue (1): 42-47.

• Article • Previous Articles Next Articles

DEVELOPMENT OF A NEW TYPE SUBMERGED ARC AGGLOMERATED FLUX WITH CaF2-MgO-CaO-AI2O3 SLAG SYSTEM USED FOR THE WELDING OF HIGH STRENGTH STEEL

Wang Zongjie;Liu Liping;Long Wei

Shenyang Polytechnic University

Published:1998-01-01

Abstract

Abstract: According to the technical need of submerged arc welding for 784 Mpa low alloy high strength steel,through analysis and tests about the flux basicity, slag system type and compositions of deposited metal, a alkaline and fluoride type agglomerated flux with high basicity and a CaF2-MgO-CaO-A12O3 system is developed. This flux matched with a suitable wire reached the technical need of submerged arc welding for 784 Mpa low alloy high strength steel.

Key words: Agglomerated flux, Low alloy steel, Submerged arc welding

CLC Number:

TG423

Wang Zongjie;Liu Liping;Long Wei. DEVELOPMENT OF A NEW TYPE SUBMERGED ARC AGGLOMERATED FLUX WITH CaF2-MgO-CaO-AI2O3 SLAG SYSTEM USED FOR THE WELDING OF HIGH STRENGTH STEEL[J]. , 1998, 34(1): 42-47.

[1]	WANG Zhenmin, TANG Jiajian, PAN Xiaohao, RAO Jie, LIN Sanbao, XU Mengjia. Digital High-power AC-Pulse Submerged Arc Welding Power Source [J]. Journal of Mechanical Engineering, 2023, 59(2): 96-103.
[2]	ZHANG Chaohua, WANG Xiaoxia, CHANG Maochun, WANG Hu, YE Yanhong, DENG Dean. Effects of Yield Strength of Weld Metal and Material Strain Hardening on Prediction Accuracy of Welding Residual Stress and Deformation in a Q345 Steel Joint [J]. Journal of Mechanical Engineering, 2021, 57(10): 160-168.
[3]	WU Junsheng, LIN Chao, PENG Dongdong, LI Xiaogang. Electrochemical Investigation and Corrosion Behavior of Low Alloy Steel Q345D in Marine Tidal Zone [J]. Journal of Mechanical Engineering, 2016, 52(20): 30-37.
[4]	WANG Peng, LIU Xia, LU Fenggui. Application of Deep-narrow Gap Welding Method in Manufacturing Component with Heavy Section [J]. Journal of Mechanical Engineering, 2016, 52(2): 56-61.
[5]	CAO Zhimin; ZHANG Guifeng; ZHANG Jianming; HUANG Chao; ZHAO Jipeng. Evolution of M-A Constituents in HAZ and Its Effect on Toughness of MAG Joint of Granular Bainitic Steel Q690C [J]. , 2014, 50(20): 84-92.
[6]	ZHAO Jun;SONG Xiaokang;CAO Hongqiang;LIU Juan. Principle of Multi-point Bending One-off Straightening Process for Longitudinally Submerged Arc Welding Pipes [J]. , 2014, 50(2): 92-97.
[7]	ZHANG Boqi;CAI Zhipeng;WANG Liang;WU Jiandong;PAN Jiluan. Studies on Mechanism of Zigzag Crack Forming Process in Weld Metal of Narrow Gap Submerged Arc Welding of Thick Plate [J]. , 2012, 48(24): 67-72.
[8]	GUO Yonghuan;FAN Xiying;GAO Ding. Cerium Oxide Influence upon Low Alloy Steel Electrode Deposited Metal [J]. , 2009, 45(4): 285-289.
[9]	LI Yunfeng;ZHAO Xihua;HUANG Binan;YANG Xiongying. Visual Sensor for Automatic Weld Seam Tracking System to Submerged Arc Inner Welding of Spirally Steel Tubes [J]. , 2008, 44(7): 237-240.
[10]	ZHU Zhengqiang;CHEN Ligong;XU Jijin;NI Chunzhen. TEMPERATURE DISTRIBUTION AND RESIDUAL STRESS IN MULTI-PASS NARROW GAP SUBMERGED ARC WELDING [J]. , 2007, 43(2): 225-229.
[11]	Lu Baotong;Li Tao;Zheng Xiulin. PREDICTION OF FATIGUE CRACK GROWTH RATES IN 16Mn STEEL AT LOW TEMPERATURE [J]. , 1994, 30(增刊): 54-59.

DEVELOPMENT OF A NEW TYPE SUBMERGED ARC AGGLOMERATED FLUX WITH CaF2-MgO-CaO-AI2O3 SLAG SYSTEM USED FOR THE WELDING OF HIGH STRENGTH STEEL

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 11

Recommended Articles

Metrics

Comments