MECHANICAL PROPERTIES AND DEEP DRAWABILITY OF AN ALUMINIUM/STEEL SHEET METAL LAMINATE

Abstract

Abstract: The mechanical properties and cylindrical deep drawability experiments for an aluminium/steel sheet metal laminate are conducted. The effects of the annealing temperature on the mechanical properties and the anisotropy of the laminate are investigated. The influence of punch profile radius on the limiting drawing ratio is examined. It is found that the limiting drawing ratio of an aluminium/steel laminate depends on the blank-set condition of whether a punch-contact metal (inter-laminate) is aluminium or steel. The reasons for this phenomenon are especially discussed.

Key words: Deep drawability, Laminate, Mechanical properties

Guo Cheng;Jia Yuxi;Guo Jianqing;Shou Hongtao. MECHANICAL PROPERTIES AND DEEP DRAWABILITY OF AN ALUMINIUM/STEEL SHEET METAL LAMINATE[J]. , 1995, 31(6): 91-96.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y1995/V31/I6/91

[1]	XIA Ziwen, SHAN Chenwei, ZHANG Mengmeng, LIU Wengang, CUI Minchao, LUO Ming. Influence of Elliptical Ultrasonic Vibration Milling on Cutting Characteristics and Subsurface Mechanical Properties of GH4169 [J]. Journal of Mechanical Engineering, 2026, 62(7): 439-451.
[2]	CAO Xianming, DANG Yuehui, CHEN Zejun, CONG Fuguan, ZHANG Yunlong, WANG Qiang. Research on Structure and Impact Property of Hot Roll bonded laminated 7A01/7A52 Aluminum Alloy Plates [J]. Journal of Mechanical Engineering, 2026, 62(6): 154-162.
[3]	LI Kai, JIANG Xiao, FANG Xuewei, CHEN Ruikai, WANG Hang, LI Changze, HUANG Ke, LU Bingheng. Effect of Laser Shock Peening on the Properties of Al-Zn-Mg Thin-walled Structures Fabricated by Wire Arc Directed Energy Deposition [J]. Journal of Mechanical Engineering, 2026, 62(3): 137-145.
[4]	LIN Fen, ZHU Xiaolong, ZHAO Youqun, LIU Xuanjiang, ZANG Liguo. Influence of Hinge Distribution Number on the Mechanical Properties of Mechanical Elastic Wheel [J]. Journal of Mechanical Engineering, 2026, 62(2): 344-353.
[5]	LIU Yuanming, LIU Yanxiao, SHEN Hongzhuo, WANG Zhenhua, WANG Tao. Deformation Characteristic and Microstructure Evolution of Mg/Al Clad Plate in Corrugated Rolling [J]. Journal of Mechanical Engineering, 2025, 61(8): 85-97.
[6]	HAN Jing, SHI Yu, LI Guang, ZHANG Hang, LU Gang. Study on the Microstructure and Mechanical Properties of Copper/Steel Joints Welded by Non-uniform Laser Source [J]. Journal of Mechanical Engineering, 2025, 61(6): 151-159.
[7]	MI Gaoyang, JIANG Yiming, WANG Chunming, ZHANG Mingyang, HU Yiyang, XIAO Yongkang, ZHAI Chuncheng, OUYANG Qiubao. Forming, Microstructure and Mechanical Properties of 7075 Al Joint Prepared Via Laser Beam Oscillating Welding [J]. Journal of Mechanical Engineering, 2025, 61(4): 86-95.
[8]	YING Liang, CHEN Zhigang, DAI Minghua, WANG Daen, HU Ping, HAN Xiaoqiang. Investigation on Bulging Formability and Failure Behavior of Thermoplastic PA6 Carbon Fiber/AL Fiber Metal Laminates during Warm Forming [J]. Journal of Mechanical Engineering, 2025, 61(4): 116-126.
[9]	CUI Bing, JIANG Tao, ZHAO Weixing, FU Yucan, DU Quanbin. Effect of Ti₃AlC₂ Construction Gradient Interface on Brazing Diamond Abrasive Grains with Cu-20Sn-10Ti Filler Metals [J]. Journal of Mechanical Engineering, 2025, 61(4): 156-166.
[10]	CHEN Wei, HUANG Fenglei, ZENG Zhiheng, PI Aiguo. Study on the Influence of Embedded Sphere-Array on the Interface of Functional-Gradient Composite Plates Prepared Using Explosive Welding [J]. Journal of Mechanical Engineering, 2025, 61(24): 75-87.
[11]	LI Jie, FAN Jikang, CAI Baihao, DUAN Linye, YANG Dongqing, WANG Kehong. Effect of Preheating Temperature on the Bonding Quality between Wire Arc Additive Manufactured Magnesium Alloy and Substrate [J]. Journal of Mechanical Engineering, 2025, 61(22): 88-96.
[12]	LIU Mingli, SHI Chuang, GUO Hongwei, LIU Rongqiang. Mechanical Modeling and Deployment Analysis of Bistable Origami Flexible Arm [J]. Journal of Mechanical Engineering, 2025, 61(21): 227-236.
[13]	YANG Jia, ZHANG Shouzhuang, LU Xuan, XU Xin, WANG Ce, LIN Panpan, MEI Han, LIU Yue, HE Peng, LIN Tiesong. Study of Copper-based Composite Brazing Process of SiC_f/SiC Composites with Cobalt-based High Temperature Alloys [J]. Journal of Mechanical Engineering, 2025, 61(21): 437-445.
[14]	ZHANG Chao, WANG Hongyuan, JI Hongli, ZHU Lichen, QIU Jinhao. Debonding Damage Identification Method for Metal-Organic Material Laminated Structure [J]. Journal of Mechanical Engineering, 2025, 61(2): 24-35.
[15]	WU Guanzhi, CHEN Nannan, SHI Huabing, LIU Kunshan, KONG Liang, WANG Min. Influence of Welding Parameters on Formation and Mechanical Properties of Lap Fillet Welded Carbon Steel Joints in Oscillation Laser Welding with Filler Wire [J]. Journal of Mechanical Engineering, 2025, 61(2): 172-180.

MECHANICAL PROPERTIES AND DEEP DRAWABILITY OF AN ALUMINIUM/STEEL SHEET METAL LAMINATE

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments