MORPHOLOGICAL EFFECT OF MARTENSITE-AUSTENITE CONSTITUENTS ON FRACTURE TOUGHNESS OF WELD HAZ

Abstract

Abstract: The morphological effect of martensise-austenite (M-A) constituents in weld coarse grained heat affected zone (CGHAZ) on the toughness is studied quantitatively with a binary image processor for high strength steel. The results show that the volume fraction of the slender M-A constituents SVf affected the toughness. The toughness was degraded remarkably with the increase of SVf value, but this harm of slender particles was eliminated as SVf value excceed a particular value because of the vicinity effect.

Key words: HAZ, Image processor, Morphology of M-A constituent, Toughness, Welded joint, Adhesive bonding, Dissimilar material joining, Mechanical joining, Multi-material vehicle body, Solid-state welding, Welding-brazing, Lightweighting

Jing Hongyang;Huo Lixing;Zhang Yufeng;Toyoda Masao;Minami Fumiyoshi. MORPHOLOGICAL EFFECT OF MARTENSITE-AUSTENITE CONSTITUENTS ON FRACTURE TOUGHNESS OF WELD HAZ[J]. , 1995, 31(6): 102-108.

[1]	ZHANG Yue, LU Yan, PENG Ruitao, ZHU Linwei, LEI Bei, JIANG Jiachuan. New Connection Technology and Application Status of Lightweight Materials [J]. Journal of Mechanical Engineering, 2024, 60(4): 259-283.
[2]	CUI Guihan, YANG Chunli. Strengthening and Toughening Mechanism of Weld Metals on GMAW-P of High Strength and High Toughness Welding Wire [J]. Journal of Mechanical Engineering, 2024, 60(4): 326-334.
[3]	WANG Gaojian, LIU Li, KANG Dandan, YE Yanhong, DENG Dean. Effect of Ni Content on Microstructure, Mechanical Properties and Corrosion Behavior of Weathering Steel Weld Metal for High-speed Train Bogies [J]. Journal of Mechanical Engineering, 2024, 60(18): 163-172.
[4]	ZHAO Lei, WU Yan, XU Lianyong, HAN Yongdian, XIONG Yu. Creep Crack Growth Rate Prediction Method for Welded Joints Considering Constraint Effect [J]. Journal of Mechanical Engineering, 2024, 60(14): 126-138.
[5]	YAN Yusheng, ZHONG Shifang, XU Lianyong, ZHAO Lei, HAN Yongdian. Effect of Welding Heat Input on Stress Corrosion Cracking Behavior in Coarse Grain Heat Affected Zone of X65 Pipeline [J]. Journal of Mechanical Engineering, 2024, 60(12): 220-227.
[6]	JIANG Yunlu, CHEN Jing, KAN Ying, WU Changzhong, CHEN Huaining. Mechanical Properties and Microstructure Evolution of 310S Austenitic Stainless Steel Welded Joint at High Temperature [J]. Journal of Mechanical Engineering, 2024, 60(12): 250-258.
[7]	LIU Jiaming, QUAN Dong, ZHAO Guoqun. Progress in Joint Forming Technology of Aviation Composites [J]. Journal of Mechanical Engineering, 2023, 59(20): 119-142.
[8]	ZHAO Geng, FANG Jinxiang, ZHANG Xiancheng. Review of Techniques for Evaluating the Uniaxial Tensile Properties and Fracture Toughness of Ductile Metallic Materials Based on Micron Indentation [J]. Journal of Mechanical Engineering, 2023, 59(2): 51-68.
[9]	LI Hefei, ZHANG Peng, ZHANG Zhefeng. Research Progress on Evaluation Methods of Fracture Toughness and Fatigue Crack Growth in High-strength Steel [J]. Journal of Mechanical Engineering, 2023, 59(16): 18-31.
[10]	ZHANG Hai, WANG Dongpo, GAO Zhiwei. Influence of Welding Residual Stress on Fatigue Life of Welded Joint Treated by Ultrasonic Peening [J]. Journal of Mechanical Engineering, 2023, 59(10): 124-133.
[11]	ZHENG Rui, ZHOU Yifan. Iteration Algorithm for the Health Assessment of Proportional-hazards Deterioration System [J]. Journal of Mechanical Engineering, 2023, 59(10): 366-373.
[12]	WANG Yanjie, ZHAO Lin, PENG Yun, CAO Yang. Microstructure and Toughness of Welding Heat Affected Zone of Medium Manganese Automobile Steel [J]. Journal of Mechanical Engineering, 2022, 58(24): 84-93.
[13]	KANG Ju, WANG Qibing, WANG Zhichun, HAN Zhewen, ZUO Yue, ZHANG Hua, JIAO Xiangdong. A Review on High Temperature Rupture Mechanisms of Dissimilar Metal Welded Joints for the USC Thermal Power Units [J]. Journal of Mechanical Engineering, 2022, 58(24): 58-83.
[14]	YAN Xin-zhong, YANG Xin-qi, TANG Wen-shen, ZHAO Hui-hui, GUO Li-jie. Microstructure and Mechanical Property of Fillet Welded Joint by Stationary Shoulder Friction Stir Welding for 2A14 Aluminum Alloy Thick-plate [J]. Journal of Mechanical Engineering, 2022, 58(22): 186-197.
[15]	SONG Ming, ZU Yizhen, MA Shuai, WANG Bingying, CAO Yuguang, JIANG Wenchun. Determination of Fracture Toughness of High-grade Pipeline Steel Based on Though-thickness-notched Specimen by Small Punch Test [J]. Journal of Mechanical Engineering, 2022, 58(12): 83-92.

MORPHOLOGICAL EFFECT OF MARTENSITE-AUSTENITE CONSTITUENTS ON FRACTURE TOUGHNESS OF WELD HAZ

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments