RESEARCH ON DESIGN OF HYDRAULIC MOTOR WITH NON-CIRCULAR PLANETARY GEAR MECHANISM

›› 1993, Vol. 29 ›› Issue (6): 20-25.

• Article • Previous Articles Next Articles

RESEARCH ON DESIGN OF HYDRAULIC MOTOR WITH NON-CIRCULAR PLANETARY GEAR MECHANISM

Li Jiansheng;Xu Xiaojun;Li Huamin;Gao Yetian;Cheng Zhuoru;Tang Dewei

Harbin Institute of Technology

Published:1993-11-01

Abstract

Abstract: Discusses the design of shaft-rotating hydraulic motor with non-circular planetary gear mechanism (NCPGM). At first the necessary conditions for composing the hydraulic motor are described. And then the calculating method and influence factors of the displacement and the pulsation are discussed, besides the displacement and the pulsation of different types of motor is given. Finally, an actual example is shown.

Key words: Design, Displacement, Hydraulic motor, Non-circular planetary gear, Pulsation

Li Jiansheng;Xu Xiaojun;Li Huamin;Gao Yetian;Cheng Zhuoru;Tang Dewei. RESEARCH ON DESIGN OF HYDRAULIC MOTOR WITH NON-CIRCULAR PLANETARY GEAR MECHANISM[J]. , 1993, 29(6): 20-25.

[1]	TAO Liang, TANG Yu, LI Yuanqiang, ZHANG Dashan, ZHANG Xiaolong. Design of Intelligent Tire Development Platform with Multiple In-tire Sensors and Research on Tire Cornering Test [J]. Journal of Mechanical Engineering, 2024, 60(8): 245-255.
[2]	HUANG Gongrui, ZHU Yangli, XIONG Jun, WANG Xing, LI Wen, CHEN Haisheng. Review on the Axial Turbine Long-blade Stage Characteristics under Off-design Conditions [J]. Journal of Mechanical Engineering, 2024, 60(8): 271-290.
[3]	REN Shan, WANG Jin, ZHAO Xin, ZHANG Yingfeng. “Doubly-fed” Manufacturing Service of Intelligent Design and Preventive Maintenance for Complex Products [J]. Journal of Mechanical Engineering, 2024, 60(6): 127-136.
[4]	ZHANG Fengli, ZHANG Rongrong, LUO Qiuli, ZHANG Yadong, LI Bing, GUO Hui. Research on the Aerodynamic Noise Mechanism and Noise Reduction of SUV Roof Hollow Spoiler [J]. Journal of Mechanical Engineering, 2024, 60(6): 398-408.
[5]	ZHANG Liyuan, YANG Jinbo, LI Ao, YANG Qingkai, XU Guangkui. Review on Configuration Design and Control of Tensegrity Spherical Robots [J]. Journal of Mechanical Engineering, 2024, 60(5): 1-18.
[6]	ZHAO Ping, ZHANG Yating, CHENG Yue, XU Hongwei, ZI Bin. Multi-task Trajectory Synthesis Method of Single-DOF Stephenson Mechanisms Based on Sensitivity Analysis [J]. Journal of Mechanical Engineering, 2024, 60(5): 59-69.
[7]	WEI Jing, LIU Zhirou, WEI Haibo, XU Ziyang. Time-space Transformation Method of Vibration Displacement and Dynamic Strain in Nodal-diameter Vibration of High-speed Thin-walled Gear [J]. Journal of Mechanical Engineering, 2024, 60(5): 70-80.
[8]	MENG Yuan, SHI Baojun, ZHANG Dequan. Research and Improvement of Kriging-HDMR Modeling Method [J]. Journal of Mechanical Engineering, 2024, 60(5): 249-263.
[9]	ZHU Shangshang, YU Huiling, DONG Yenan, LUO Shijian. A Product Creative Design Method That Incorporates the Creation of Consumer Groups [J]. Journal of Mechanical Engineering, 2024, 60(5): 276-287.
[10]	YAO Jing, YANG Shuai, YIN Hang, WANG Yunchang, WANG Wenjing, QIU Mingjun. Intelligent Driving Method of Digital Valve Based on Soft Measurement of Valve Core Displacement [J]. Journal of Mechanical Engineering, 2024, 60(4): 155-166.
[11]	GAO Qiang, WANG Jian, ZHANG Yan, ZHENG Xuyang, LÜ Hao, YIN Guodong. Topology Optimization Approaches and Its Application and Prospect in Transportation Engineering [J]. Journal of Mechanical Engineering, 2024, 60(4): 369-390.
[12]	ZONG Huaizhi, AI Jikun, ZHANG Junhui, JIANG Lei, TAN Shujie, LIU Yuxian, SU Qi, XU Bing. Lightweight Design of Limb Leg Units for Hydraulic Quadruped Robots by Topology Optimization and Lattice Filling [J]. Journal of Mechanical Engineering, 2024, 60(4): 420-429.
[13]	XIE Chao, ZHANG Enjie, YAN Biao, GAO Feng, YANG Jinping, FANG Guangqiang, WANG Zhiyi. Configuration Design and Demonstration of a Spaceborne Deployable Membrane Array Antenna [J]. Journal of Mechanical Engineering, 2024, 60(3): 11-27.
[14]	LIU Xiaofei, WAN Bo, WANG Yu, LI Mingyu, ZHAO Yongsheng. Design, Analysis and Performance Optimization of a Novel Super-redundantly Actuated Hybrid Robot [J]. Journal of Mechanical Engineering, 2024, 60(3): 55-67.
[15]	DU Yanbin, WANG Aoting, HE Kun. Tooth Contact Analysis of Helical Gears with Longitudinal Modification Considering Twist Errors [J]. Journal of Mechanical Engineering, 2024, 60(3): 143-154.

RESEARCH ON DESIGN OF HYDRAULIC MOTOR WITH NON-CIRCULAR PLANETARY GEAR MECHANISM

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments