THEORETICAL CALCULATION METHOD OF HIGH-RELIABILITY LIFE OF ROLLING BEARINGS

Abstract

Abstract: In this paper, the theoretical calculating method of high-reliability life of rolling bearings is derived, assuming that the fatigue life of bearing steel follows the three-parameter Weibull distribution. A comparison between experimental and calculated life of three kinds of tapered roller bearings shows that the experimental life agrees better with the life calculated by the new method.

Key words: Predict, Reliability, Roller bearing, 3D Printing, Elastic modulus, Metal prosthesis, Porosity, Porous structure

Li Chenggang. THEORETICAL CALCULATION METHOD OF HIGH-RELIABILITY LIFE OF ROLLING BEARINGS[J]. , 1993, 29(3): 91-97.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y1993/V29/I3/91

[1]	GUO Lie, GUAN Longxin, GE Pingshu, WU Xiaojian. Review on Longitudinal-lateral Motion Control of Intelligent Vehicles with Network Unreliability [J]. Journal of Mechanical Engineering, 2026, 62(8): 298-316.
[2]	PI Dawei, LI Xuhang, ZHANG Chenshuo, YAN Yongjun, WANG Hongliang, WANG Xianhui. Predictive Control for Path Tracking of Corner Module Vehicle Based on Instantaneous Center of Rotation Slover [J]. Journal of Mechanical Engineering, 2026, 62(8): 450-461.
[3]	FENG Xiaoming, WAN Zhenping, SUN Dongsheng, LONG Yuanxiang. Research Status and Development Trends of Brake Force-amplifying Transmission Mechanisms [J]. Journal of Mechanical Engineering, 2026, 62(8): 1-20.
[4]	LUO Zhong, LI Hongyu, LI Lei, DONG Yinzhe. Real-time Prediction Method for Response of Difficult-to-measure Points of Rotor System Under Variable Working Conditions Driven by Digital Twin [J]. Journal of Mechanical Engineering, 2026, 62(7): 221-233.
[5]	LIU Junjie, ZHANG Youchao, ZHANG Houchao, ZHANG Bing, XU Quan, ZHU Xiaoyang, LAN Hongbo. Hybrid Manufacturing of High-precision Copper-based Flexible Transparent Circuits Based on Electric-field-driven Micro 3D Printing [J]. Journal of Mechanical Engineering, 2026, 62(7): 427-438.
[6]	YUAN Yuan, Liu Xiucheng, QI Pan, Cao Wenbo, Wang Zhenghong, WU Bin, Gao Xiang. A Non-Destructive Surface Hardness Testing Method Utilizing the Transduction Curve of a Magnetostrictive SH₀ Guided Wave Sensor [J]. Journal of Mechanical Engineering, 2026, 62(6): 228-236.
[7]	LIU Hui, Ma Xiaokang, HAN Lijin, XIANG Changle. Real-time Energy Management Strategy for Hybrid Electric Vehicles Based on Deep Reinforcement Learning and Model Predictive Control [J]. Journal of Mechanical Engineering, 2026, 62(6): 302-313.
[8]	SHI Yihan, ZHANG Xu, ZHUANG Cunbo, LIU Jinshan, WANG Jiaxiu, SUN Liansheng. Discrete Workshop Production Bottleneck Prediction with CNN-LSTM Spatio-temporal Network Integrated with Dual Attention Mechanism [J]. Journal of Mechanical Engineering, 2026, 62(5): 49-60.
[9]	ZHAO Wei, CHANG Jiajun, WEI Qingsong, WU Jiamin, YE Chunsheng, HUANG Shuangjun. Influence of Silicon Nitride Combined with Silica Sol Infiltration on the Properties of Alumina Ceramic Cores via Binder Jetting [J]. Journal of Mechanical Engineering, 2026, 62(5): 287-296.
[10]	LIU Peiru, WEI Fanan, YAO Ligang, LIU Xiaomin. Research of 3D Printed Flexible Inductor Based on Conductive Polymer Hydrogel Modified [J]. Journal of Mechanical Engineering, 2026, 62(5): 347-356.
[11]	LIU Changyong, WU Huaian, LI Chen, HUANG Kehao, LIU Zhiyuan, CHEN Zhangwei, ZHANG Lei. Investigation on the Four-axis Multi-material Simultaneous 3D Printing Based on Rotating Nozzle [J]. Journal of Mechanical Engineering, 2026, 62(5): 399-407.
[12]	TANG Xiaolin, ZHANG Kunyi, CHEN Zhige, YANG Jianying, YANG Wei. Research on Autonomous Driving Safety Planning Method Integrating Interactive Prediction Information [J]. Journal of Mechanical Engineering, 2026, 62(4): 249-262.
[13]	YANG Liangliang, GONG Zhuangzhuang, HE Xiwang, WANG Muchen, MIN Qiang, KAN Ziyun, SONG Xueguan. Digital Twin Construction for Structural Damage Identification [J]. Journal of Mechanical Engineering, 2026, 62(4): 328-341.
[14]	LI Guiwei, CAO Qiyuan, WANG Jiaqing, ZHAO Yihang, WU Wenzheng. Research and Development of Advanced Material Additive Manufacturing [J]. Journal of Mechanical Engineering, 2026, 62(3): 15-45.
[15]	HE Chaofan, WU Qilin, QIAO Tianhong, SUN Yuan, GAO Qing, WANG Peng, MA Liang, YIN Jun, YANG Huayong, HE Yong. Projection-enabled 3D Bioprinting: Principles, Challenges, and Strategies [J]. Journal of Mechanical Engineering, 2026, 62(3): 46-69.

THEORETICAL CALCULATION METHOD OF HIGH-RELIABILITY LIFE OF ROLLING BEARINGS

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments