OPTIMAL DESIGN OF 3-D MODIFICATION OF HELICAL GEARS

Abstract

Abstract: In this paper, the interference of profile modification of helical gears with longitudinal modification is discussed, the calculated results show the failure in independent designing of two types of modifications because of inclination of the contact lines on tooth surface. Further, a new 3-D modifying model and an optimal design method which includes 3-D finite element method, flexibility matrix and mathematical programming the optimal objective of uniforming load distribution and decreasing transmission error is achieved.

Key words: Optimal design, Helical gear, Modification

Fang Zongde;Shen Yunwen. OPTIMAL DESIGN OF 3-D MODIFICATION OF HELICAL GEARS[J]. , 1992, 28(6): 57-61.

[1]	DU Yanbin, WANG Aoting, HE Kun. Tooth Contact Analysis of Helical Gears with Longitudinal Modification Considering Twist Errors [J]. Journal of Mechanical Engineering, 2024, 60(3): 143-154.
[2]	WU Jie, SHEN Yifu, HUANG Guoqiang. Investigation into the Microstructure and Properties of 2024Al TIG Joint with Wire Filler Subjected to Friction Stir Processing [J]. Journal of Mechanical Engineering, 2024, 60(20): 153-161.
[3]	HU Weifei, LIAO Jiale, GUO Yunfei, YAN Jiquan, LI Guang, YUE Haifeng, TAN Jianrong. Time-dependent Reliability Analysis Based on Physics-Informed Neutral Network [J]. Journal of Mechanical Engineering, 2024, 60(13): 141-153.
[4]	CHEN Rui, CHENG Shimin, WEN Shicheng, ZHAO Ziheng, PENG Ruitao, HU Congfang, XIAO Xiangwu. Structural Optimization of 7150-T6 Aeronautical Aluminum Alloy Thin-walled Open Circular Tube Based on J-C Model Modification [J]. Journal of Mechanical Engineering, 2024, 60(11): 95-104.
[5]	CHEN Yonghua, SUN Zhenguo, ZHANG Wen, CHEN Qiang. Research on High Efficiency Weld Modification Technology for Wall-climbing Robot [J]. Journal of Mechanical Engineering, 2023, 59(9): 12-19.
[6]	GU Yongzhen, DUAN Baoyan, DU Jingli, SHI Weijie, ZHANG Yongtao, WU Lupeng, FENG Shufei. Shape-state Optimal Design of Cable-membrane-truss Antenna Based on Improved Force Density Method and Nonlinear Finite Element Method [J]. Journal of Mechanical Engineering, 2023, 59(9): 252-262.
[7]	SU Jinzhan, LI Xudong, YIN Xunmin, JIA Haitao, GUO Fang. Design and Form Grinding Principle of Linear Triangular End Relief for Double Helical Gears [J]. Journal of Mechanical Engineering, 2023, 59(5): 121-129.
[8]	YANG Qiang, SUN Benqi, LI Shujun, DAI Jiansheng. Reliability Optimization Design Method of Constrained Metamorphic Mechanism Oriented to the Stability of Configuration Transformation [J]. Journal of Mechanical Engineering, 2023, 59(3): 22-37.
[9]	Ping’an Tan, Bin Song, Xu Shangguan, Huadong Liu. Optimal Design of Transmission Characteristics for Hexagonal Coil Wireless Power Transfer System Based on Genetic Algorithm^* [J]. Chinese Journal of Electrical Engineering, 2023, 9(2): 94-106.
[10]	CHEN Yisi, LU Gang, YAN Qingsong, HUANG Puying, XU Pian, MAO Pu, ZHOU Zeyuan. Mechanical Properties and Creep Mechanism of Yttrium and Cerium Modified ZL114A alloy via Vacuum Counter-pressure Casting [J]. Journal of Mechanical Engineering, 2023, 59(18): 186-195.
[11]	YANG Wenzhen, LIU Yu, LIU Rui, XIE Jin, XIONG Zhuang, TANG Bin, XU Kang. Preparation of Lyophobic Surface via Etching-phase Separation Method for Improving Threshold Performance of Microfluidic Inertial Switch [J]. Journal of Mechanical Engineering, 2023, 59(18): 349-356.
[12]	TIAN Jun, YAO Songjie, HAN Baoqing, WANG Longyang, ZHANG Daxing, ZHOU Cheng, LIU Jing, WANG Zhihai, YU Kunpeng, WANG Congsi. Characterization of Flexible Wire-wound Interconnection for Microwave Component Signal Transmission and Optimized Design [J]. Journal of Mechanical Engineering, 2023, 59(17): 79-88.
[13]	LIU Xinrong, WANG Huipeng, WANG Zhonghou, YANG Yongming. Influence of Wide-swath Machining Error on Transmission Error of Topological Modification Gear Transmission System [J]. Journal of Mechanical Engineering, 2023, 59(15): 131-141.
[14]	WANG Hong, WANG Bing, LIU Zhanqiang, ZHAO Jinfu, SONG Qinghua. Research Progress on Machinability Improvement of Difficult-to-machine Materials with Surface Modification Methods [J]. Journal of Mechanical Engineering, 2023, 59(15): 311-332.
[15]	PENG Jian, WANG Xuepeng, JI Tie, CHEN Junchun. Multimodal Interactive Evaluation and Optimization Design of Intelligent Helmet [J]. Journal of Mechanical Engineering, 2023, 59(11): 117-128.

OPTIMAL DESIGN OF 3-D MODIFICATION OF HELICAL GEARS

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments