LI Rui, WANG Houxiao. Study on Taper Angles for Through Holes Machined by Using Picosecond Laser Spiral Layer Micro Cutting Combined with Backside Reflection and Refocusing[J]. Journal of Mechanical Engineering, 2026, 62(17): 463-472.
[1] WANG C X,WANG Q T,QIAN Q D,et al. The development of laser drilling:A review[J]. IOP Conference Series:Materials Science and Engineering,2020,782:022067. [2] HARTMANN C,HAMBACH N,JUNGST M,et al. High density perforation of thin Al-foils with ultra short pulse lasers[J]. Journal of Laser Micro/ Nanoengineering,2013,8(3):266-270. [3] MARIMUTHU S,ANTAR M,DUNLEAVEY J. Characteristics of micro-hole formation during fibre laser drilling of aerospace superalloy[J]. Precision Engineering,2019,55:339-348. [4] FENG X K,XU B,LEI J G,et al. Elimination of hole mouth burr in multilayer PCB micro-hole by using micro-EDM[J]. Micromachines,2021,12(6):688. [5] FENG W H,GUO J,YAN W J,et al. Deep channel fabrication on copper by multi-scan underwater laser machining[J]. Optics and Laser Technology,2019,111:653-663. [6] FENG W H,GUO J,YAN W J,et al. Underwater laser micro-milling of fine-grained aluminium and the process modelling by machine learning[J]. Journal of Micromechanics and Microengineering,2020,30(4):045011. [7] WEI T,SUN S F,ZHANG F Y,et al. A review on laser drilling optimization technique:Parameters,methods,and physical-field assistance[J]. The International Journal of Advanced Manufacturing Technology,2024,131:5691-5710. [8] WANG R J,DONG X,WANG K D,et al. Investigation on millijoule femtosecond laser spiral drilling of micro-deep holes in thermal barrier coated alloys[J]. International Journal of Advanced Manufacturing Technology,2021,114:857-869. [9] 李朋,贺斌,田东坡,等. 超快激光制孔辅助吹气优化的仿真与实验研究[J]. 激光技术,2018,42(5):583-587. LI Peng,HE Bin,TIAN Dongpo,et al. Simulation and experimental research of auxiliary gas blowing in ultrafast laser hole drilling[J]. Laser Technology,2018,42(5):583-587. [10] 温嵘,王琦,李璇,等. 超快激光加工技术在航空发动机制造中的应用[J]. 电加工与模具,2020(6):56-59. WEN Rong,WANG Qi,LI Xuan,et al. Application of ultrafast laser processing technology in aeroengine manufacturing[J]. Electromachining and Mould,2020(6):56-59. [11] 刘浩存,蔡燕,谢奕,等. 水基超声辅助纳秒激光微孔加工[J]. 应用激光,2022,42(11):64-70. LIU Haocun,CAI Yan,XIE Yi,et al. Nanosecond laser micro-hole machining assisted by water based ultrasound[J]. Applied Laser,2022,42(11):64-70. [12] 郑李娟,孙勇,徐向前,等. 异质多元多层复合材料激光微细加工研究进展[J]. 机械工程学报,2025,61(1):305-325. ZHENG Lijuan,SUN Yong,XU Xiangqian,et al. Laser micromachining of heterogeneous multi-layer composite materials:A review[J]. Journal of Mechanical Engineering,2025,61(1):305-325. [13] WANG H X,LI R,LIU J,et al. A comparative study for demonstrating the effect of the assist gas and E-field on hole generation characteristics induced by femtosecond laser layered ring hole-cutting of magnesium alloy AZ91D sheets[J]. Optics Communications,2025,574:131110. [14] 林远添,郭亮,张庆茂,等. 超短脉冲激光钢箔打孔效果及锥度改善[J]. 应用激光,2015,35(3):356-362. LIN Yuantian,GUO Liang,ZHANG Qingmao,et al. The effects of steel drilling by ultra short laser and the improvements of taper[J]. Applied Laser,2015,35(3):356-362. [15] SHIN S,LEE W,PARK J K,et al. Precise taper angle control by multilevel femtosecond laser processing[J]. Optics and Laser Technology,2023,159:108956. [16] ZHANG H L,MAO Y,KANG M,et al. Fabrication of high aspect ratio micro-holes on 304 stainless steel via backside-water-assisted laser drilling[J]. Optics and Lasers in Engineering,2023,162:107426. [17] ZHANG F Y,WANG J,WANG X,et al. Experimental study of nickel-based superalloy IN792 with femtosecond laser drilling method[J]. Optics and Laser Technology,2021,143:107335. [18] GU Z H,HE Y Y,YANG J,et al. Dual-path micro-holes process for 0Cr17Ni7Al stainless steel thin plate with picosecond laser[J]. Journal of Manufacturing Processes,2023,101:1224-1233. [19] LI T,REN N F,WANG H X,et al. Femtosecond laser layered ring trepanning of stainless steel sheets with and without transverse magnetic assistance[J]. Optics and Laser Technology,2020,129:106231. [20] WANG H X,LIU J,XU Y,et al. Experimental characterization and real-time monitoring for laser percussion drilling in titanium alloy using transverse electric field assistance and/or lateral air blowing[J]. Journal of Manufacturing Processes,2021,62:845-858.