• CN: 11-2187/TH
  • ISSN: 0577-6686

Journal of Mechanical Engineering ›› 2026, Vol. 62 ›› Issue (17): 236-245.doi: 10.3901/JME.260512

Previous Articles    

Research on Power Hardware-in-the-loop Emulation Technology for Joint Motors of Robots

LIU Yupeng1, MA Runlin1, DENG Jiamin1, TAO Yong2, XU Dong1   

  1. 1. School of Automation Science and Electrical Engineering, Beihang University, Beijing 100191;
    2. School of Mechanical Engineering and Automation, Beihang University, Beijing 100191
  • Received:2025-11-13 Revised:2026-04-19 Published:2026-11-20

Abstract: In various types and functions of operating equipment such as industrial robots and humanoid robots, the accuracy, dynamic response speed, and stability of joint motors directly determine the motion reproduction precision and limb flexibility of such equipment. Given the high cost and prolonged cycles associated with physical testing, Power Hardware-in-the-Loop (PHIL) emulation has emerged as a key technology for the development and validation of motor drive systems. It serves as a substitute for actual motors, enabling load emulation and characteristic replication under complex operating conditions. However, existing PHIL emulators frequently suffer from response latency and insufficient precision in current control, which severely compromises the fidelity of test results. Regarding this issue, a sliding mode current control (SMCC) strategy is proposed for PHIL systems and performance is compared with traditional proportional-integral (PI) control and model predictive control (MPC). Experimental results demonstrate that the proposed SMCC strategy exhibits significant superiority in both current tracking speed and control precision, providing technical support for the efficient testing of joint motor drives.

Key words: robot, joint motor, power hardware-in-the-loop, sliding mode current control

CLC Number: