RGPowerFlow：High-order Numerical Platform for Real Gas Flows with Strongly Variable Thermal Properties in High-speed Rotating Machines

doi:10.3901/JME.260156

Abstract

Abstract: A high-order numerical platform has been developed to address the problems of low simulation accuracy and difficulty in analyzing aerodynamic characteristics caused by sudden changes in real gas thermal properties in high-speed rotating machines. The numerical platform includes a pre-processing module, a flow solver and a post-processing module, which can realize the functions of fluid domain modeling and meshing, solving the steady and transient real gas flows, and presenting the results. The coupled iterative method accurately can predict the nonlinear abrupt behaviors of real gas thermophysical properties, the finite-volume third-order flux reconfiguration scheme can capture the shock waves within the complex structure, and the preconditioning implicit time-stepping method can solve the problem of numerical oscillations and pseudo-physical results due to characteristic velocity differences in low-velocity fields. The performance d platform is verified using the numerical examples and experiments, and applied to analysis the internal flow fields of supercritical CO₂ (S-CO₂) centrifugal compressor. The results show that platform can realize fluid domain modeling, mesh generation, flow fields simulation and results presentation, and can simulate complex flow processes, with better convergence and stability than traditional schemes. The flow fields inside the S-CO₂ centrifugal compressor can be simulated using this developed platform, and the results of aerodynamic characterization are similar to those of experiments. Therefore, the developed numerical platform is expected to provide a solution for the analysis of real gas flow fields and aerodynamic characteristics in high-speed rotating machines.

Key words: numerical platform, rotating machines, real gas flow, nonlinear thermophysical properties, high-order scheme

CLC Number:

TK05

ZHANG Enbo, WU Yiming, FENG Yanli, SHEN Mingyu, ZHAO Kunpeng, BAI Bofeng. RGPowerFlow：High-order Numerical Platform for Real Gas Flows with Strongly Variable Thermal Properties in High-speed Rotating Machines[J]. Journal of Mechanical Engineering, 2026, 62(12): 398-413.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.260156

http://www.cjmenet.com.cn/EN/Y2026/V62/I12/398

References

[1] 刘亚斌，谭磊，韩亚东. 基于分区RANS-LES的混流泵叶顶间隙泄漏涡流动结构及非定常特性研究[J]. 机械工程学报，2024，60(24):309-316，329. LIU Yabin，TAN Lei，HAN Yadong. Investigation on vortex structure and unsteady characteristics of tip leakage flow in mixed-flow pump by zonal RANS-LES[J]. Journal of Mechanical Engineering，2024，60(24):309-316，329.
[2] 李琛玺，郭鹏程. 高负荷涡轮叶顶设计及结构参数对气热性能的影响机制[J]. 机械工程学报，2025，61(8):283-296. LI Chenxi，GUO Pengcheng. Influence of tip design and structural parameters on aerothermal performance in high-load turbine[J]. Journal of Mechanical Engineering，2025，61(8):283-296.
[3] 闫巍，郑群，位景山，等. 基于工业燃机多级轴流压气机特性预测方法研究[J]. 机械工程学报，2024，60(8):299-307. YAN Wei，ZHENG Qun，WEI Jingshan，et al. Research on characteristic prediction method of multistage axial compressor based on industrial gas turbine[J]. Journal of Mechanical Engineering，2024，60(8):299-307.
[4] CETIN T，ZHU J. Aerodynamic design and optimization of sCO₂ turbomachinery:Two-stage optimization approach[J]. Energy Conversion and Management，2023，297:117711.
[5] LI Yuzhe，ZHANG Enbo，FENG Jiaqi，et al. Reduced-dimensional prediction method for the axial aerodynamic forces in the off-design operation of near-critical CO₂ centrifugal compressors[J]. Energy，2024，302:131791.
[6] TIAN Hua，LIN Xin，LI Ligeng，et al. Performance and loss analysis of a small-scale supercritical CO₂ turbine[J]. International Journal of Energy Research，2023，2023(1):4835473.
[7] DENNER F. Fully-coupled pressure-based algorithm for compressible flows:Linearisation and iterative solution strategies[J]. Computers & Fluids，2018，175:53-65.
[8] PATANKAR S，SPALDING D. A calculation procedure for heat，mass and momentum transfer in three- dimensional parabolic flows[J]. International Journal of Heat and Mass Transfer，1972，15(10):1787-1806.
[9] VAN DOORMAAL J，RAITHBY G. Enhancement of the SIMPLE method for predicting incompressible fluid flow[J]. Numerical Heat Transfer，1983，7:147-163.
[10] ISSA R. Solution of the implicitly discretised fluid flow equations by operator-splitting[J]. Journal of Computational Physics，1986，62(1):40-65.
[11] MANGANIA L，DARWISHB M，MOUKALLD F. An OpenFOAM pressure-based coupled CFD solver for turbulent and compressible flows in turbomachinery applications[J]. Numerical Heat Transfer，2015，69(5):413-431.
[12] BLAZEK J. Computational fluid dynamics:Principles and applications[M]. Oxford OX51GB:Butterworth Heinemann，2015.
[13] JIANG Zhenhua，YAN Chao，YU Jian，et al. Effective high-order solver with thermally perfect gas model for hypersonic heating prediction[J]. Applied Thermal Engineering，2016，99:147-159.
[14] ECONOMOM T，PALACIOS F，COPELAND S，et al. SU2:An open-source suite for multiphysics simulation and design[J]. AIAA Journal，2015，54(3):829-846.
[15] TORO E. Riemann solvers and numerical methods for fluid dynamics:A practical introduction [M]. New York:Springer-Verlag Berlin Heidelberg，2009.
[16] DENTON J. The calculation of three-dimensional viscous flow through multistage turbomachines[J]. Journal of Turbomachinery，1992，114(1):18-26.
[17] ARNONE A，PACCIANI R，SESTINI A. Multigrid computations of unsteady rotor-stator interaction using the Navier-Stokes equations[J]. Journal of Fluids Engineering，1995，117(4):647-652.
[18] CINNELLA P，MICHEL B. Toward improved simulation tools for compressible turbomachinery:Assessment of residual-based compact schemes for the transonic compressor NASA Rotor 37[J]. International Journal of Computational Fluid Dynamics，2014，28(1-2):31-40.
[19] SANDBERG R，MICHELASSI V，PICHLER R，et al. Compressible direct numerical simulation of low-pressure turbines-part I:Methodology[J]. Journal of Turbomachinery，1992，114(1):18-26.
[20] LI Zhen，JU Yaping，ZHANG Chuhua. Parallel large-eddy simulation of subsonic and transonic flows with transition in compressor cascade[J]. Journal of Propulsion and Power，2019，35(6):1163-1174.
[21] PECNIK R，RINALDI E，COLONNA P. Computational fluid dynamics of a radial compressor operating with supercritical CO₂[J]. Journal of Engineering for Gas Turbines and Power，2012，134(12):122301.
[22] WRIGHT S，RADEL R，VERNON M，et al. Operation and analysis of a supercritical CO₂ Brayton cycle[R]. Sandia Report，2010，SAND2010-0171.
[23] BEHAFARID F，PODOWSKI M. Modeling and computer simulation of centrifugal CO₂ compressors at supercritical pressures[J]. Journal of Fluids Engineering，2016，138(6):061106.
[24] YOON S，JAMESON A. Lower-upper Symmetric-Gauss- Seidel method for the Euler and Navier-Stokes equations[J]. AIAA Journal，1987，26(9):929-935.
[25] SHIMA E，KITAMURA K. CFD Method for aero-acoustics using all-speed numerical flux and preconditioned implicit time integration[C]//20th AIAA Computational Fluid Dynamics Conference，Hawaii，2011.
[26] ELMAGHRBAY M，AMMAR R，RAJASEKARAN S. Fast GPU algorithms for implementing the red-black Gauss-Seidel method for solving partial differential equations[C]//IEEE Symposium on Computers and Communications，Split，Croatia，2013.
[27] 阎超. 航空CFD四十年的成就与困境[J]. 航空学报，2022，43(10):526490. YAN Chao. Achievement and predicaments of CFD in aeronautics in past forty years[J]. Acta Aeronautica ET Astronautica Sinica，2022，43(10):526490.
[28] SCHLICHTING H，GERSTEN K. Boundary-layer theory[M]. New York:Springer-Verlag Berlin Heidelberg，2017.
[29] LADSON C，HILL A，JONSON W. NACA 0012 oscillatory and transient pitching[R]. Advisory Group for Aerospace Research and Development，1982.
[30] LADSON C. Pressure distributions from high Reynolds number transonic tests of an NACA 0012 airfoil in the Langley 0.3-meter transonic cryogenic tunnel[R]. NASA Langley Research Center，1987.
[31] STRAZISAR A，WOOD J，HATHAWAY M. Laser anemometer measurements in a transonic axial-flow fan rotor[R]. NASA Lewis Research Center，1989-2879.
[32] ARIMA T，SONODA T，SHIROTORI M. A numerical investigation of transonic axial compressor rotor flow using a low-Reynolds-number k-ε turbulence model[J]. Journal of Turbomachinery，1999，121(1):44-58.
[33] 张小昆，张海滨，张彪，等. 联乙酰分子磷光特性及示踪流场测速应用研究[J]. 工程热物理学报，2023，44(9):2486-2495. ZHANG Xiaokun，ZHANG Haibin，ZHANG Biao，et al. Study on the phosphorescence characteristics of diacetyl molecules and the application of molecular tagging velocimetry[J]. Journal of Engineering Thermophysics，2023，44(9):2486-2495.
[34] HASUIKE H，YAMAMOTO T，FUKUSHIMA T. Test plan and preliminary test results of a bench scale closed cycle gas turbine with supercritical CO₂ as working fluid[C]//Proceedings of ASME Turbo Expo 2010:Power for Land，Sea and Air，Glasgow，UK，2010.
[35] UTAMURA M，HASUIKE H，CGAWA K. Demonstration of supercritical CO₂ closed regenerative Brayton cycle in a bench scale experiment[C]//Proceedings of ASME Turbo Expo 2012，Copenhagen，Denmark，2012.
[36] LIU Chaoqun，GAO Yisheng，TIAN Shulin，et al. Rortex-a new vortex vector definition and vorticity tensor and vector decompositions[J]. Physics of Fluids，2018，30:035103.