• CN：11-2187/TH
  • ISSN：0577-6686
机械工程学报

机械工程学报 ›› 2017, Vol. 53 ›› Issue (5): 12-23.doi: 10.3901/JME.2017.05.012

• 绿色制造技术 • 上一篇    下一篇

扫码分享

面向能耗的多工艺路线柔性作业车间分批优化调度模型*

李聪波, 沈欢, 李玲玲, 易茜   

  1. 重庆大学机械传动国家重点实验室 重庆 400030
  • 出版日期:2017-03-05 发布日期:2017-03-05
  • 作者简介:李聪波(通信作者)，男，1981年出生，博士，教授，博士研究生导师。主要研究方向为绿色制造与再制造。E-mail：congboli@cqu.edu.cn
  • 基金资助:
    * 国家自然科学基金(51475059)国家高技术研究发展计划(863计划，2014AA041506)和资助项目; 20160819收到初稿，20161108收到修改稿;

A Batch Splitting Flexible Job Shop Scheduling Model for Energy Saving under Alternative Process Plans

LI Congbo, SHEN Huan, LI Lingling, YI Qian   

  1. State Key Laboratory of Mechanical Transmission， Chongqing University， Chongqing 400030
  • Online:2017-03-05 Published:2017-03-05

PDF

554

摘要：

合理的调度方案能有效降低柔性作业车间总能耗。针对柔性作业车间中加工工件种类多、单批工件数量大、加工工艺路线柔性大等问题，研究一种面向能耗的多工艺路线柔性作业车间分批优化调度模型。分析柔性作业车间中工件加工过程能耗特性，以车间总能耗最低和完工时间最小为优化目标建立了多工艺路线柔性作业车间分批优化调度模型，并采用多目标 模拟退火算法对模型进行优化求解。通过算法优化得到的调度方案与经验调度方案的对比分析，验证了该模型的有效性和实用性。

关键词: 多工艺路线, 分批, 能耗, 柔性作业车间调度

Abstract:

Reasonable scheduling can significantly reduce total energy consumption in flexible job shops. A batch splitting flexible job shop scheduling model for energy saving under alternative process plans is proposed, in terms of flexible job shops with the characteristic of large variety of workpiece, large quantities of batch size and flexibility of process plans. The characteristic of energy consumption composition of workpiece machining is analyzed, and then the batch splitting flexible job shop scheduling model is established, with the optimization objectives of minimizing energy consumption and makespan. Finally the model is solved based on Multi-objective simulated algorithm, verifying the validity of the model by comparing the algorithm optimization scheduling with experimental scheduling.

Key words: alternative process plans, batch splitting, energy consumption, flexible job shop scheduling

版权所有 © 2019 《机械工程学报》编辑部 | 京ICP备05055788号-30