考虑动力学响应的天线座拓扑-自由尺寸协同优化设计

doi:10.3901/JME.2024.11.020

机械工程学报 ›› 2024, Vol. 60 ›› Issue (11): 20-31.doi: 10.3901/JME.2024.11.020

• 特邀专栏：复杂装备智能设计理论与方法 • 上一篇下一篇

扫码分享

考虑动力学响应的天线座拓扑-自由尺寸协同优化设计

朱继宏^1,2,3, 张亦飞^1,2, 侯杰^1,2,3, 李祥吉^1,2, 张卫红^1,2,3

1. 陕西省空天结构技术重点实验室西安 710072;
2. 西北工业大学机电学院西安 710072;
3. 西北工业大学航宇材料一体化设计与增材制造装备技术国际联合研究中心西安 710072

收稿日期:2023-06-30 修回日期:2024-01-05 出版日期:2024-06-05 发布日期:2024-08-02
作者简介:朱继宏,男,1981年出生,教授。主要从事飞行器新概念整体结构技术、高速飞行器防热-承载一体化、智能材料与结构、太空与行星原位制造技术研究。E-mail:jh.zhu@nwpu.edu.cn

Topology and Free Size Collaborative Optimization Design of Antenna Pedestal Considering Dynamic Response

ZHU Jihong^1,2,3, ZHANG Yifei^1,2, HOU Jie^1,2,3, LI Xiangji^1,2, ZHANG Weihong^1,2,3

1. Shaanxi Key Laboratory of Aerospace Structures, Xi'an 710072;
2. School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an 710072;
3. State IJR Center of Aerospace Design and Additive Manufacturing, Northwestern Polytechnical University, Xi'an 710072

Received:2023-06-30 Revised:2024-01-05 Online:2024-06-05 Published:2024-08-02

摘要/Abstract

摘要： 结构的动力学响应设计是复杂装备设计与制造过程中一个不可回避的问题。针对复杂舰载天线座结构的设计需求提出了考虑动力学响应的拓扑-自由尺寸协同优化设计方法。以加权频率最大化为目标函数，简谐激励下结构的应力幅值为约束，构建协同优化模型并推导目标函数以及约束函数的灵敏度信息。针对复杂天线座结构板壳实体混合模型，进行协同设计，由拓扑优化结果确定内部材料分布，自由尺寸优化结果确定壳体的大致厚度分布，并在考虑工艺性基础上进行精确尺寸设计。随后对优化模型进行重构并分析校核。采用协同优化方法能够有效减少设计过程中的反复迭代，提升设计效率。设计结果表明，该方法能够显著提升结构的固有频率，大幅降低最苛刻工况下结构最大应力、位移幅值，实现性能更为优异的天线座结构设计。

关键词: 拓扑优化, 自由尺寸优化, 动力学响应, 加权频率, 天线座

Abstract: The design of structural dynamic performance is inevitable in the design and manufacturing process of complicated equipment. A topology and free size collaborative optimization method considering the dynamic response is proposed for the design requirements of the complicated shipborne antenna pedestal structure. A topology optimization model with the maximum weighted frequency as the objective function is established, and the stress amplitude of the structure under harmonic excitation is considered as the design constraint. The sensitivity information of the objective function and the constraint function with respect to the design variables is derived. Take the antenna pedestal structure as an example, the topology-freesize collaborative optimization design is carried out for the hybrid model of solid and shell. The topology optimization results determine the internal structural configuration, and the free size optimization results determine the approximate thickness distribution of the shell. When considering manufacturability, precise size design is carried out. Subsequently, the optimization model was remodeled and checked. The proposed method can effectively spare repeated iterations in the design process to improve efficiency. The design results show that the proposed collaborative optimization method significantly improves the first three orders of natural frequencies of the structure and greatly reduce the maximum stress amplitude, displacement amplitude of the structure under the most severe operating conditions, and achieve a better structural design of the antenna pedestal.

Key words: topology optimization, free size optimization, dynamic response, weighted frequency, antenna pedestal

中图分类号:

V232

朱继宏, 张亦飞, 侯杰, 李祥吉, 张卫红. 考虑动力学响应的天线座拓扑-自由尺寸协同优化设计[J]. 机械工程学报, 2024, 60(11): 20-31.

ZHU Jihong, ZHANG Yifei, HOU Jie, LI Xiangji, ZHANG Weihong. Topology and Free Size Collaborative Optimization Design of Antenna Pedestal Considering Dynamic Response[J]. Journal of Mechanical Engineering, 2024, 60(11): 20-31.

参考文献

[1] OLE S,KURT M.Topology optimization approaches[J].Structural and Multidisciplinary Optimization,2013,48(6):1031-1055.
[2] ZHU Jihong,ZHANG Weihong,XIA Liang.Topology optimization in aircraft and aerospace structures design[J].Archives of Computational Methods in Engineering,2016,23(4):595-622.
[3] DAVIN J,AHMAD B.Customization of automotive structural components using additive manufacturing and topology optimization[J].IFAC Papers OnLine,2019,52(10):212-217.
[4] 牛草,顾广鑫,朱磊,等.车载导弹发射架结构有限元分析与拓扑优化设计[J].兵工学报,2023,44(2):437-451.NIU Cao,GU Guangxin,ZHU Lei,et al.Structural finite element analysis and topology optimization design of a vehicle-borne missile launching cradle[J].Acta Armasmentarii,2023,44(2):437-451.
[5] PEDERSEN N L.Maximization of eigenvalues using topology optimization[J].Structural and Multidisciplinary Optimization,2000,20(1):2-11.
[6] TSAI T D,CHENG C C.Structural design for desired eigenfrequencies and mode shapes using topology optimization[J].Structural and Multidisciplinary Optimization,2013,47(5):673-686.
[7] LIU Tao,ZHU Jihong,ZHANG Weihong,et al.Integrated layout and topology optimization design of multi-component systems under harmonic base acceleration excitations[J].Structural and Multidisciplinary Optimization,2019,59(4):1053-1073.
[8] ZHU Jihong,HE Fei,LIU Tao,et al.Structural topology optimization under harmonic base acceleration excitations[J].Structural and Multidisciplinary Optimization,2018,57(3):1061-1078.
[9] ZHU M,YANG Y,GUEST J K,et al.Topology optimization for linear stationary stochastic dynamics:Applications to frame structures[J].Structural Safety,2017,67:116-131.
[10] LIU Hu,ZHU Jihong,ZHANG Weihong.Topology optimization design of spacecraft antenna pedestal structure under random excitations[J].Applied Mechanics and Materials,2014,711:542-545.
[11] LIU Tao,ZHU Jihong,HE Fei,et al.A MAC based excitation frequency increasing method for structural topology optimization under harmonic excitations[J].International Journal for Simulation and Multidisciplinary Design Optimization,2017,8:A4.
[12] LONG Kai,WANG Xuan,LIU Hongliang.Stress-constrained topology optimization of continuum structures subjected to harmonic force excitation using sequential quadratic programming[J].Structural and Multidisciplinary Optimization,2019,59(5):1747-1759.
[13] 吴宏宇,郗小鹏,李创.基于OptiStruct的天线座结构优化设计[J].装备制造技术,2015(2):41-43.WU Hongyu,XI Xiaopeng,LI Chuang.Antenna design optimization based on optistruct[J].Equipment Manufacturing Technology,2015(2):41-43.
[14] 黄潇.机载雷达天线座结构优化设计[J].电子机械工程,2015,31(5):35-37.HUANG Xiao.Structure optimization of antenna pedestal in airborne radar[J].Electro-Mechanical Engineering,2015,31(5):35-37.
[15] 郑鸿生,欧开良.某雷达座结构的有限元分析及优化设计[J].机械强度,2021,43(3):752-757.ZHENG Hongsheng,OU Kailiang.Finite element analysis and optimal design of a radar block structure[J].Journal of Mechanical Strength,2021,43(3):752-757.
[16] 房建斌.基于协同优化的某雷达天线座结构优化设计[J].火控雷达技术,2021,50(3):85-89,100.FANG Jianbin.Structural optimization of a radar antenna pedestal using a collaborative optimization method[J].Fire Control Radar Technology,2021,50(3):85-89,100.
[17] 张卫红,杨军刚,朱继宏.压力载荷下的结构拓扑-形状协同优化[J].航空学报,2009,30(12):2335-2341.ZHANG Weihong,YANG Jungang,ZHU Jihong.Simultaneous topology and shape optimization of pressure loaded structures[J].Acta Aeronautica et Astronautica Sinica,2009,30(12):2335-2341.
[18] WANG M Y,WANG Xiaoming,GUO Dongming.A level set method for structural topology optimization[J].Computer Methods in Applied Mechanics&Engineering,2004,35(7):415-441.
[19] WANG M Y,ZHOU S W.Synthesis of shape and topology of multi-material structures with a phase-field method[J].Journal of Computer-Aided Materials Design,2005,11(2-3):117-138.
[20] MARTIN P B,OLE S.Material interpolation schemes in topology optimization[J].Archive of Applied Mechanics,1999,69(9-10):635-654.
[21] MATHIAS S,KRISTER S.An alternative interpolation scheme for minimum compliance topology optimization[J].Structural and Multidisciplinary Optimization,2001,22(2):116-124.
[22] ZHU Jihong,BECKERS P,ZHANG Weihong.On the multi-component layout design with inertial force[J].Journal of Computational and Applied Mathematics,2009,234(7):2222-2230.
[23] 朱胜利,刘红武,邱宏波.基于复合材料机翼刚度的铺层自由尺寸优化分析[J].航空工程进展,2012,3(1):55-59.ZHU Shengli,LIU Hongwu,QIU Hongbo.Free-size optimization analysis of composites ply based on the stiffness of the composite wing[J].Advances in Aeronautical Science and Engineering,2012,3(1):55-59.
[24] LIU Hu,ZHANG Weihong,GAO Tong.A comparative study of dynamic analysis methods for structural topology optimization under harmonic force excitations[J].Structural and Multidisciplinary Optimization,2015,51(6):1321-1333.

考虑动力学响应的天线座拓扑-自由尺寸协同优化设计

Topology and Free Size Collaborative Optimization Design of Antenna Pedestal Considering Dynamic Response

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	张行, 富宽, 陈铭浩, 李睿, 石新娜. 压差式多节串联管道机器人越障时动力学演化规律及减振分析[J]. 机械工程学报, 2024, 60(8): 348-359.
[2]	高强, 王健, 张严, 郑旭阳, 吕昊, 殷国栋. 拓扑优化方法及其在运载工程中的应用与展望[J]. 机械工程学报, 2024, 60(4): 369-390.
[3]	纵怀志, 艾吉昆, 张军辉, 江磊, 谭树杰, 刘余贤, 苏琦, 徐兵. 基于拓扑优化和晶格填充的四足机器人肢腿单元轻量化设计[J]. 机械工程学报, 2024, 60(4): 420-429.
[4]	林起崟, 贾一鸣, 周意葱, 王晨, 洪军. 面向装配结构的拓扑优化参数影响分析[J]. 机械工程学报, 2024, 60(15): 291-303.
[5]	孙雨欣, 蔡守宇, 张旭, 王珂. 基于自适应特征驱动法的散热结构拓扑优化设计[J]. 机械工程学报, 2024, 60(15): 346-357.
[6]	肖蜜, 李奇石, 高亮, 沙伟, 黄明喆. 基于各向异性材料插值的点阵散热结构跨尺度拓扑优化[J]. 机械工程学报, 2024, 60(13): 71-80.
[7]	李宝童, 刘策, 洪军, 刘庆芳, 史萌, 李开泰. 复杂热流承载结构拓扑优化设计研究[J]. 机械工程学报, 2024, 60(13): 92-121.
[8]	郑静, 荣轩霈, 姜潮, 米栋, 李加强. 考虑惯性载荷的结构热力耦合拓扑优化[J]. 机械工程学报, 2024, 60(13): 130-140.
[9]	白影春, 刘康, 李超, 韩旭. 基于大规模并行计算的三维薄壁填充结构特征频率拓扑优化设计[J]. 机械工程学报, 2024, 60(11): 32-40.
[10]	宗子凯, 肖蜜, 周冕, 沙伟, 高亮. 考虑局部过热约束的自支撑结构等几何拓扑优化[J]. 机械工程学报, 2024, 60(11): 41-52.
[11]	周意葱, 林起崟, 王晨, 邵衡, 洪军. 装配体结构与装配界面材料刚度协同优化方法[J]. 机械工程学报, 2024, 60(11): 53-61.
[12]	黄明喆, 肖蜜, 刘喜亮, 沙伟, 周冕, 高亮. 面向散热性能的多孔结构多尺度等几何拓扑优化[J]. 机械工程学报, 2024, 60(1): 54-64.
[13]	许洁, 高杰, 肖蜜, 高亮. 基于等几何拓扑优化的柔性机构设计[J]. 机械工程学报, 2024, 60(1): 137-148.
[14]	崔宇朋, 余杨, 韦明秀, 李振眠, 余建星. 改进博弈论四重组合赋权法下的开口甲板多目标拓扑优化设计[J]. 机械工程学报, 2023, 59(9): 263-273.
[15]	占金青, 晏家坤, 蒲圣鑫, 朱本亮, 刘敏. 基于等几何分析的电热驱动柔顺机构拓扑优化设计[J]. 机械工程学报, 2023, 59(21): 177-187.