行波磁场减速模式对板坯连铸结晶器内传输行为的影响

doi:10.3901/JME.2023.18.219

机械工程学报 ›› 2023, Vol. 59 ›› Issue (18): 219-227.doi: 10.3901/JME.2023.18.219

扫码分享

行波磁场减速模式对板坯连铸结晶器内传输行为的影响

肖红^1,2, 王璞², 朱晶亮¹, 陈希青², 唐海燕², 肖晓丹¹, 张家泉²

1. 湖南中科电气股份有限公司磁电研究院岳阳 414000;
2. 北京科技大学冶金与生态工程学院北京 100083

收稿日期:2022-12-16 修回日期:2023-06-16 出版日期:2023-09-20 发布日期:2023-12-07
通讯作者: 张家泉(通信作者),男,1963年出生,博士,教授,博士研究生导师。主要研究方向为优特钢连铸工艺优化,铸坯凝固组织与铸坯缺陷控制等技术。E-mail:jqzhang@metall.ustb.edu.cn
作者简介:肖红,女,1983年出生,博士,高级工程师。主要研究方向为连铸过程中电磁冶金装备及冶金行为数值模型仿真。E-mail:xiaohong199515@163.com
基金资助:
国家重点研发计划(016YEB0601302)和湖南省科技计划(2019RS2065)资助项目。

Effect of Deceleration Mode of Traveling Wave Magnetic Field on the Liquid Steel Transportation Behavior in the Mold of Slab Casting

XIAO Hong^1,2, WANG Pu², ZHU Jingliang¹, CHEN Xiqing², TANG Haiyan², XIAO Xiaodan¹, ZHANG Jiaquan²

1. Magnetoelectric Research Institute, Hunan Zhongke Electric Co., Ltd., Yueyang 414000;
2. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083

Received:2022-12-16 Revised:2023-06-16 Online:2023-09-20 Published:2023-12-07

摘要/Abstract

摘要： 高拉速高质量连铸生产是当前钢铁冶金领域中绿色低碳发展的重要路径。基于汽车板生产用1 000 mm×230 mm断面连铸板坯结晶器内的钢水传输行为研究，探究一种行波磁场减速模式(EMLS)对水口侧孔射流及其钢坯质量的影响。根据电磁热流体与凝固传输理论建立了三维耦合数值模型，利用电导率等效法测试装置测量电磁力校验了模型的准确性，并提出了电磁控流作用下的结晶器综合冶金性能评价依据。结果表明，EMLS电磁力在结晶器宽面两侧呈大小相等、方向相反分布，最佳工作频率为4 Hz，其电流强度对电磁力的影响起主导作用。指出，当前浇铸条件下EMLS的最佳减速电流为200 A。此时，电磁力方向具有指向水口两侧出钢口且略微向下的特征，可以较好地控制其侧孔射流对初凝坯壳的冲刷强度，同时也避免了电磁力作用下弯月面波动过大和钢液冲击深度加深的问题。综合表明，合理利用行波磁场减速控流有望较好地解决当前常见的结晶器液面卷渣和凝固钩对夹杂物与气泡的捕捉，从而有利于提高后续IF钢冷轧板的表面质量。

关键词: 结晶器传输行为, 行波磁场, 减速模式, 电流频率, 电流强度

Abstract: High speed continuous casting with premium quality is currently a key issue in steel metallurgy for its green low carbon development. The transmission behavior of liquid steel in 1 000 mm×230 mm slab continuous casting mold is studied to explore a way for the product quality improvement through nozzle jet flow control by a kind of travelling wave magnetic field deceleration mode. Based on the theory of electromagnetic hot fluid and solidification transport, a coupled three-dimensional numerical model is developed. The model is validated experimentally by electromagnetic force measurement under an equivalent electrical conductivity. The comprehensive effect of the Electromagnetic Level Stabilizer (EMLS) on the metallurgical behavior of mold is proposed based on a multi-parameters evaluation. It is found out that the distribution of electromagnetic force presents a centrally symmetrical pattern on the wide faces of the mold. The optimal frequency of deceleration mode is 4 Hz, and the current intensity plays a leading role to the effect of electromagnetic force. It is suggested that the optimal stirring current intensity should be 200 A for the EMLS to obtain the electromagnetic forces with characteristic of pointing at the nozzle jets downward slightly, which is beneficial to the flow impingement control upon the solidifying shell with less meniscus surface fluctuation and the jet impact depth. It is shown accordingly, that the frequent phenomena such as mold flux involvement and inclusions or gas bubbles under solidification hook could be effectively eliminated by the adoption of mold EMLS, which is vital to the improvement of the final surface quality of IF steel products.

Key words: mold transportation behavior, traveling wave magnetic field, EMLS, current frequency, current intensity

中图分类号:

TF777

肖红, 王璞, 朱晶亮, 陈希青, 唐海燕, 肖晓丹, 张家泉. 行波磁场减速模式对板坯连铸结晶器内传输行为的影响[J]. 机械工程学报, 2023, 59(18): 219-227.

XIAO Hong, WANG Pu, ZHU Jingliang, CHEN Xiqing, TANG Haiyan, XIAO Xiaodan, ZHANG Jiaquan. Effect of Deceleration Mode of Traveling Wave Magnetic Field on the Liquid Steel Transportation Behavior in the Mold of Slab Casting[J]. Journal of Mechanical Engineering, 2023, 59(18): 219-227.

参考文献

[1] TRIPATHY P K,DAS S,JHA M K,et al. Migration of slab defects during hot rolling[J]. Ironmaking & Steelmaking,2006,33(6):477-483.
[2] XU Lin,WANG Engang,CHRISTIAN K,et al. Numerical simulation of the effects of horizontal and vertical EMBr on jet flow and mold level fluctuation in continuous casting[J]. Metallurgical & Materials Transactions B,2018,49(5):2779-2793.
[3] KUNSTREICH S. Electromagnetic stirring for continuous casting-Part 2[J]. Metallurgical Research & Technology,2003,100(11):1043-1061.
[4] DAUBY P H. Continuous casting:make better steel and more of it![J]. Metallurgical Research & Technology,2012,109(2):113-136.
[5] KUBOTA J,KUBO N,ISHII T,et al. Steel flow control in continuous slab caster mold by traveling magnetic field[J]. NKK Technical Review(Japan),2001,85:1-9.
[6] KUNSTREICH S. Electromagnetic stirring for continuous casting[J]. Metallurgical Research & Technology,2003,100(4):395-408.
[7] KUBOTA J,OKIMOTO K,SHIRAYAMA A,et al. Meniscus flow control in the mold by traveling magnetic field for high speed slab caster[C]//Iron and Steel Society. Steelmaking Conference Proceedings. Washington,D. C.:Iron and Steel Society of Aime,1991:233.
[8] NAKAMURA H,KOHIRA S,KUBOTA J,et al. Technology for production of high quality slab at high speed casting[C]//Iron and Steel Society. Steelmaking Conference Proceedings. Washington,D. C.:Iron and Steel Society of Aime,1992:409.
[9] KUBO N,ISHII T,KUBOTA J,et al. Numerical simulation of molten steel flow under a magnetic field with argon gas bubbling in a continuous casting mold[J]. ISU International,2004,44(3):556.
[10] WANG Hongdan,ZHU Miaoyong,YU Haiqi.Numerical analysis of electromagnetic field and flow field in high casting speed slab continuous casting mold with traveling magnetic field[J]. Journal of Iron and Steel Research(International),2010,17(9):25-30.
[11] YIN Yanbin,ZHANG Jiongming,WANG Bo,et al. Effect of in-mould electromagnetic stirring on the flow, initial solidification and level fluctuation in a slab mould:a numerical simulation study[J]. Ironmaking & Steelmaking,2018:1-10.
[12] Xiao H,LI S,Wang P,et al. Study on the in-mold flow behavior driven by a subsurface electromagnetic stirring for IF steel slab casting[C]//TMS 2021150th Annual Meeting & Exhibition Supplemental Proceedings. Springer,Cham,2021:590-601.
[13] ABOUTALEBI M R,GUTHRIE R I L,SEYEDEIN S H. Mathematical modeling of coupled turbulent flow and solidification in a single belt caster with electromagnetic brake[J]. Applied mathematical modelling,2007,31(8):1671-1689.
[14] JONES W P,LAUNDER B E. The calculation of low-Reynolds-number phenomena with a two-equation model of turbulence[J]. International Journal of Heat and Mass Transfer,1973,16(6):1119-1130.
[15] LAI K Y M,SALCUDEAN M,TANAKA S,et al. Mathematical modeling of flows in large tundish systems in steelmaking[J]. Metallurgical & Materials Transactions B,1986,17(3):449-459.
[16] DONG Qipeng,ZHANG Jiongming,YIN Yanbin,et al. Three-dimensional numerical modeling of macrosegregation in continuously cast billets[J]. Metals,2017,7(6):209.
[17] WANG Qiangqiang,ZHANG Lifeng. Influence of FC-mold on the full solidification of continuous casting slab[J]. JOM,2016,68(8):2170-2179.
[18] 李少翔,张晓萌,张家泉,等. 连铸流动与凝固耦合模拟中糊状区系数的表征及影响[J]. 工程科学学报,2019,41(2):199-208. LI Shaoxiang,ZHANG Xiaomeng,ZHANG Jiaquan,et al. Representation and effect of mushy zone coefficient on the coupled flow and solidification simulation during continuous casting[J]. Chinese Journal of Engineering,2019,41(2):199-208.
[19] ZHANG L F. Transient fluid flow phenomena in continuous casting tundishes[J]. Iron and Steel Technology, 2010,7(7):55-69.
[20] KITTAKA S,KANKI T,WATANABE K,et al. Nippon steel in-mold electro-magnetic stirrer M-EMS for slab caster[J]. Nippon Steel Technical Report. Overseas,2002(86):68-73.
[21] 毛斌,张桂芳,李爱武. 连续铸钢用电磁搅拌的理论与技术[M]. 北京:冶金工业出版社,2012. MAO Bin,ZHANG Guifang,LI Aiwu. Theory and technology of electromagnetic stirring for continuous cast steel[M]. Beijing:Metallurgical Industry Press,2012.
[22] THOMAS B G. Modeling of continuous casting defects related to mold fluid flow[J]. Iron and Steel Technology,2006,3(7):127.

行波磁场减速模式对板坯连铸结晶器内传输行为的影响

Effect of Deceleration Mode of Traveling Wave Magnetic Field on the Liquid Steel Transportation Behavior in the Mold of Slab Casting

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价