利用激光局部硬化效应提高2B06铝合金板材拉深成形性研究

doi:10.3901/JME.2022.20.250

机械工程学报 ›› 2022, Vol. 58 ›› Issue (20): 250-259.doi: 10.3901/JME.2022.20.250

• 特邀专栏：高性能塑性成形制造(下) • 上一篇下一篇

扫码分享

利用激光局部硬化效应提高2B06铝合金板材拉深成形性研究

张晓嵩^1,2, 陈帅峰¹, 李旺³, 宋鸿武¹, 张士宏¹, 魏作山^4,5

1. 中国科学院金属研究所师昌绪先进材料创新中心沈阳 110016;
2. 中国科学技术大学材料科学与工程学院沈阳 110016;
3. 沈阳理工大学材料科学与工程学院沈阳 110158;
4. 滨州魏桥国科高等技术研究院滨州 256606;
5. 山东省先进铝基材料科与技术重点实验室滨州 256606

收稿日期:2021-12-02 修回日期:2022-06-01 出版日期:2022-10-20 发布日期:2022-12-27
通讯作者: 宋鸿武(通信作者)，男，1981年出生，博士，研究员。主要研究方向为先进塑性加工技术。E-mail：hwsong@imr.ac.cn
作者简介:张晓嵩，男，1985年出生，博士研究生。主要研究方向为铝合金板材局部激光热处理应用。E-mail：xszhang14s@imr.ac.cn
基金资助:
魏桥国科高研院-中科院金属所研发资助项目(GYY-JSBU-2022-003)。

Study on Improving the Formability of 2B06 Aluminum Alloy Sheet by Local Hardening Effect Using Laser Heat Treatment

ZHANG Xiaosong^1,2, CHEN Shuaifeng¹, LI Wang³, SONG Hongwu¹, ZHANG Shihong¹, WEI Zuoshan^4,5

1. Shi-changxu Innovation Center for Advanced Materials, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016;
2. School of Materials Science and Engineering, University of Science and Technology of China, Shenyang 110016;
3. School of Materials Science and Engineering, Shenyang Ligong University, Shenyang 110158;
4. Binzhou Institute of Technology, Binzhou 256606;
5. Shandong Key Laboratory of Advanced Aluminium Material and Technology, Binzhou 256606

Received:2021-12-02 Revised:2022-06-01 Online:2022-10-20 Published:2022-12-27

摘要/Abstract

摘要： 针对2B06铝合金复杂零件成形困难问题，提出了利用激光热处理局部硬化提高板材成形性的思路。在通过激光热处理试验研究了铝合金板的激光硬化效应的基础上，采用数值模拟计算了铝合金板激光热处理过程中激光光斑路径和其周边热影响区域的峰值温度场，并通过实际测温验证了其准确性。提出并构建了耦合性能梯度的差性坯料模型，对激光局部硬化的杯形件拉深成形性进行了模拟和试验研究。结果表明，激光扫描方式可以形成稳定的梯度温度场并对周边非加热区影响较小，且可以通过多道次扫描方式设计不同宽度范围的大梯度差性板材坯料。力学性能试验表明激光热处理可以有效地提高铝合金的局部加工硬化能力，这种效应可以有效抑制杯形件拉深时圆角大变形区的减薄，从而提升了板材的拉深性能。在上述基础上，将激光局部热处理用于2B06铝合金航空复杂口框零件的成形，通过设计激光处理路径和参数，获得合理的局部硬化区域，可有效地避免在加强筋处出现过度减薄导致的破裂，大大提高复杂零件的成形性。

关键词: 激光局部热处理, 峰值温度场, 铝合金硬化, 性能梯度, 拉深成形性

Abstract: Aiming at the difficulty of forming complex parts of 2B06 aluminum alloy, the idea of using local hardening by laser heat treatment to improve the formability of sheet metal was put forward. Based on the experimental study of hardening effect on aluminum alloy sheet by laser heat treatment, the peak temperature field of laser spot path and its surrounding heat-affected area was calculated by numerical simulation, and its accuracy was verified by actual temperature measurement. A sheet billet model coupled with mechanical property gradient was proposed and constructed to study the deep drawing formability of cup parts with laser local hardening using both simulation and experimental methods. The results show that the laser scanning method can form a stable gradient temperature field and has little influence on the surrounding non-heated area, and big property gradient sheet blanks with different widths can be designed by multi-pass scanning. Mechanical properties tests show that laser heat treatment can effectively improve the local hardening ability of aluminum alloy. This effect can effectively prevent the thinning of large deformation area at round corners during cup drawing, thus improving the drawing formability of sheet metal. Based on the above mentioned, the laser local heat treatment is applied to the forming of 2B06 aluminum alloy aviation complex frame parts. By designing the laser treatment path and parameters, the reasonable local hardening area can be obtained, which can effectively avoid the crack caused by excessive thinning at the reinforcement area, and greatly improve the formability of complex parts.

Key words: laser local heat treatment, peak temperature field, aluminum alloy hardening, gradient property, deep drawing formability

中图分类号:

TG156

张晓嵩, 陈帅峰, 李旺, 宋鸿武, 张士宏, 魏作山. 利用激光局部硬化效应提高2B06铝合金板材拉深成形性研究[J]. 机械工程学报, 2022, 58(20): 250-259.

ZHANG Xiaosong, CHEN Shuaifeng, LI Wang, SONG Hongwu, ZHANG Shihong, WEI Zuoshan. Study on Improving the Formability of 2B06 Aluminum Alloy Sheet by Local Hardening Effect Using Laser Heat Treatment[J]. Journal of Mechanical Engineering, 2022, 58(20): 250-259.

参考文献

[1] 潘复生，张丁非. 铝合金及应用[M]. 北京:化学工业出版社，2006. PAN Fusheng，ZHANG Dingfei. Aluminum alloy and its application[M]. Beijing:Chemical Industry Press，2006.
[2] RAMBABU P，PRASAD N E，KUTUMBARAO V V，et al. Aluminium alloys for aerospace applications[M]// Aerospace Materials and Material Technologies. Singapore:Springer，2017.
[3] LANG L H，LI T，AN D Y，et al. Investigation into hydromechanical deep drawing of aluminum alloy - Complicated components in aircraft manufacturing[J]. Materials Science and Engineering A，2009，499(1-2):320-324.
[4] WANG L，STRANGWOOD M，BALINT D，et al. Formability and failure mechanisms of AA2024 under hot forming conditions[J]. Materials Science and Engineering:A，2011，528(6):2648-2656.
[5] BOLT P J，LAMBOO N A P M，ROZIER P J C M. Feasibility of warm drawing of aluminium products[J]. Journal of Materials Processing Technology，2001，115(1):118-121.
[6] MERKLEIN M，JOHANNES M，LECHNER M，et al. A review on tailored blanks - Production，applications and evaluation[J]. Journal of Materials Processing Technology，2014，214(2):151-164.
[7] MERKLEIN M，NGUYEN H. Adjusting optimized material properties for tailored heat treated blanks[J]. Key Engineering Materials，2011，473(1):420-427.
[8] GEIGER M，MERKLEIN M，STAUD D，et al. An inverse approach to the numerical design of the process sequence of tailored heat treated blanks[J]. Production Engineering，2008，2(1):15-20.
[9] HOFMANN A. Deep drawing of process optimized blanks[J]. Journal of Materials Processing Technology，2001，119(1-3):127-132.
[10] GEIGER M，MERKLEIN M，KERAUSCH M. Finite element simulation of deep drawing of tailored heat treated blanks[J]. CIRP Annals-Manufacturing Technology，2004，53(1):223-226.
[11] MERKLEIN M，BOHM W，LECHNER M，et al. Tailoring material properties of aluminum by local laser heat treatment[J]. Physics Procedia，2012，39(1):557-569.
[12] NGUYEN H，MERKLEIN M. Improved formability of aluminum alloys using laser induced hardening of tailored heat treated blanks[J]. Physics Procedia，2012，39(1):318-326.
[13] LECHNER M，KUPPERT A，HAGENAH H，et al. Optimization of the heat treatment layout and blank outline of THTB[J]. Key Engineering Materials，2013，554/557(2):2465-2471.
[14] KAHRIMANIDIS A，WORTBERG D，MERKLEIN M. Influence of a short term heat treatment by conduction and induction on the mechanical properties of AA6014 alloys[J]. Physics Procedia，2014，56(1):1410-1418.
[15] 王匀，张凯，董培龙，等. 激光辅助加热下的微塑性成形的研究[J]. 激光技术，2009，33(2):147-150. WANG Yun，ZHANG Kai，DONG Peilong，et al. Investigation into microforming based on laser-assisted heating[J]. Laser Technology，2009，33(2):147-150.
[16] 王志坚，高昱霖，宋鸿武，等. 局部热处理差性板提高2B06铝合金口框零件成形性的模拟研究[J]. 锻压技术，2020，45(2):61-66. WANG Zhijian，GAO Yulin，SONG Hongwu，et al. Simulation study on improving formability of frame parts for 2B06 aluminum alloy by local heat treatment tailored heat treated blanks[J]. Forging & Stamping Technology，2020，45(2):61-66.
[17] 王志坚，高昱霖，宋鸿武，等. 短时局部热处理提高2B06铝合金口框零件成形性的模拟研究[J]. 锻压技术，2019，44(9):133-140. WANG Zhijian，GAO Yulin，SONG Hongwu，et al. Simulation study on formability improvement of 2B06 aluminum alloy frame through short time local heat treatment[J]. Forging & Stamping Technology，2019，44(9):133-140.
[18] 王志坚，郭芳玉，宋鸿武，等. 局部热处理对7B04铝合金口框零件成形性影响的模拟研究[J]. 锻压技术，2021，46(10):187-195. WANG Zhijian，GUO Fangyu，SONG Hongwu，et al. Simulation and study on influence of local heat treatment on formability for 7B04 aluminum alloy frame parts[J]. Forging & Stamping Technology，2021，46(10):187-195.
[19] 高昱霖. 激光局部热处理改善2B06铝合金板成形性研究[D]. 沈阳:沈阳航空航天大学，2020. GAO Yulin. Research on improving the formability of 2B06 aluminum alloy sheets by laser local treatment[D]. Shenyang:Shenyang Aerospace University，2020.
[20] MAZUMDER J，STEEN W. Heat transfer model for cw laser material processing[J]. Journal of Applied Physics，1980，51(1):941-947.
[21] 曾祥呈，黄建文，张庆茂. 激光焊接过程温度场的模拟[J]. 应用激光，2008，28(3):190-195. ZENG Xiangcheng，HUANG Jianwen，ZHANG Qingmao. Thermal field simulation in laser welding process[J]. Applied Laser，2008，28(3):190-195.
[22] 杨世铭，陶文铨. 传热学[M]. 北京:高等教育出版社，2006. YANG Shiming，TAO Wenquan. Heat transfer theory[M]. Beijing:High Education Press，2006.
[23] 《中国航空材料手册》编辑委员会.中国航空材料手册第2卷[M]. 北京:中国标准出版社，2001. Editorial Committee of China Aeronautical Materials Handbook. China aeronautical materials handbook，Vol. 2[M]. Beijing:China Standards Press，2001.
[24] SONTI N，AMATEAU M F. Finite-element modeling of heat flow in deep-penetration laser welds in aluminum alloys[J]. Numerical Heat Transfer，1989，16(3):351-370.
[25] 吴思根，周昕宇，蒋志伟，等. 低频振荡扫描激光焊接铝合金薄板温度场数值模拟[J]. 应用激光，2019，39(3):440-447. WU Sigen，ZHOU Xinyu，JIANG Zhiwei，et al. Numerical simulation on the temperature field for low-frequency laser oscillation welding of alumimun alloy[J]. Applied Laser，2019，39(3):440-447.

利用激光局部硬化效应提高2B06铝合金板材拉深成形性研究

Study on Improving the Formability of 2B06 Aluminum Alloy Sheet by Local Hardening Effect Using Laser Heat Treatment

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

本文评价

[1]	孔玲, 刘才溢, 彭艳. 非均匀温度场下变梯度特性热成形技术研究[J]. 机械工程学报, 2017, 53(8): 75-81.
[2]	彭艳, 刘才溢, 郝露菡, 邢鹏达. 性能梯度分布热成形技术研究进展[J]. 机械工程学报, 2016, 52(8): 67-75.