复合工况下四轮驱动电动汽车操纵稳定性控制

doi:10.3901/JME.2021.08.205

摘要/Abstract

摘要： 设计一个考虑车辆侧纵向耦合的模型预测控制器（Model predictive control， MPC）用于提升四轮驱动电动汽车在复合工况下的操纵性和稳定性。基于传统UniTire轮胎模型，推导面向控制器设计的复合工况UniTire轮胎模型解析表达式；基于前后轮侧偏角相平面提出一种新的车辆稳定性评价标准，通过前后轮侧偏角的位置到坐标原点的距离判断车辆的稳定性，给出定量的稳定性指标；采用MPC控制器结构将车辆操纵性控制、稳定性控制以及四轮滑移率约束作为目标函数，采用复合工况UniTire轮胎模型表达式和双轨车辆模型构建预测模型，并且通过稳定指标和轮胎滑移率实时调整各个目标的权重以达到最优的控制效果；通过Simulink-CarSim联合仿真和硬件在环（HiL）测试对算法进行验证，结果表明，该控制器能够根据车辆稳定性指标动态调节跟踪权重，有效提升车辆的操纵性和稳定性。并且由于复合UniTire轮胎模型的使用，极限工况下控制器决策的四轮力矩更小，有效地抑制轮胎滑移率的增加。

关键词: 四轮驱动电动汽车, 复合工况UniTire轮胎模型, 稳定性指标, 模型预测控制, 轮胎侧偏角相平面, 硬件在环测试

Abstract: A model predictive controller(MPC) considering combined slip conditions is designed to improve the handling and stability of four-wheel drive electric vehicles. Firstly, the UniTire model is simplified and deduced, and the analytical expressions of the combined UniTire model which can be used for the controller design are obtained. Secondly, based on the analysis of the tire slip angle phase plane, a new vehicle stability evaluation standard is proposed. The vehicle stability can be judged by the distance from the position of the front and rear tire slip angles to the coordinate origin, and the quantitative stability index can be obtained. Then, the MPC structure is used to take the vehicle handling control, stability control and four-wheel slip ratio constrains as the objective function. Combined UniTire model and the double-track vehicle model are used as the prediction model, and the weight of each objective is adjusted in real time through the stability index and tire slip ratio to achieve the optimal control effect. Finally, the algorithm is verified by Simulink-CarSim simulation and hardware in the loop(HiL) test. The results show that the controller can dynamically adjust the tracking weight according to the vehicle stability index, and improve the handling and stability of the vehicle. Due to the application of the combined UniTire model, the four-wheel torque decided by the controller under the harsh condition is smaller, which effectively inhibits the increase of tire slip ratio.

Key words: four-wheel drive electric vehicle, combined UniTire model, stability index, model predictive control, tire slip angle phase plane, hardware in the loop test

中图分类号:

U461

许男, 李小雨. 复合工况下四轮驱动电动汽车操纵稳定性控制[J]. 机械工程学报, 2021, 57(8): 205-220.

XU Nan, LI Xiaoyu. Handling and Stability Control of Four-wheel Drive Electric Vehicle under Combined Slip Conditions[J]. Journal of Mechanical Engineering, 2021, 57(8): 205-220.

导出引用管理器 EndNote|Reference Manager|ProCite|BibTeX|RefWorks

链接本文: http://www.cjmenet.com.cn/CN/10.3901/JME.2021.08.205

http://www.cjmenet.com.cn/CN/Y2021/V57/I8/205

参考文献

[1] KIHM A，TROMMER S. The new car market for electric vehicles and the potential for fuel substitution[J]. Energy Policy，2014，73(1)：147-157.
[2] WANG R，CHEN Y，FENG D. Development and performance characterization of an electric ground vehicle with independently-actuated in-wheel motors[J]. J. Power Sources，2011，196(8)：3962-71.
[3] MAEDA K，FUJIMOTO H，HORI Y. Four-wheel driving-force distribution method for instantaneous or split slippery roads for electric vehicle[J]. Automatika，2013，54(1)：103-113.
[4] DATA S，FRIGERIO F. Objective evaluation of handling quality[J]. Proc. Institution Mech. Eng. Part D，J. Automobile Eng.，2002，216(4)：297- 305.
[5] NOVELLIS L，SORNIOTTI A，GRUBER P. Wheel torque distribution criteria for electric vehicles with torque-vectoring differentials[J]. IEEE Transactions on Vehicular Technology，2014，63(4)：1593-1602.
[6] LU Q，GENTILE P，TOTA A，et al. Enhancing vehicle cornering limit through sideslip and yaw rate control[J]. Mechanical Systems and Signal Processing，2015，75(1)：455-472.
[7] ZHANG L，DING H，HUANG Y，et al. An analytical approach to improve vehicle manoeuvreability via torque vectoring control：Theoretical study and experimental validation[J]. IEEE Transactions on Vehicular Technology，2019，68(5)：4514-4526.
[8] ZHAI L，SUN T，WANG J. Electronic stability control based on motor driving and braking torque distribution for a four in-wheel motor drive electric vehicle[J]. IEEE Transactions on Vehicular Technology，2016，65(1)：4726-4739.
[9] HAN Z，XU N，CHEN H，et al. Energy-efficient control of electric vehicles based on linear quadratic regulator and phase plane analysis[J]. Applied Energy，2018，213(1)：639-657.
[10] DI C，TSENG H，BERNARDINI D，et al. Vehicle yaw stability control by coordinated active front steering and differential braking in the tire sideslip angles domain[J]. IEEE Transactions on Control Systems Technology，2013，21(4)：1236-1248.
[11] BEAL C，CHRISTIAN G. Model predictive control for vehicle stabilization at the limits of handling[J]. IEEE Transactions on Control Systems Technology，2012，21(4)：1258-1269.
[12] BEAL C，BOBIER C G，GERDES J C. Controlling vehicle instability through stable handling envelopes[C/CD]//ASME 2011 Dynamic Systems and Control Conference and Bath/ASME Symposium on Fluid Power and Motion Control. American Society of Mechanical Engineers，2011.
[13] BROWN M，FUNKE J，ERLIEN S，et al. Safe driving envelopes for path tracking in autonomous vehicles[J]. Control Engineering Practice，2017，61(1)：307-316.
[14] HAO Z，XIAN L，SHU S，et al. Phase plane analysis for vehicle handling and stability[J]. International Journal of Computational Intelligence Systems，2011，4(6)：1179-1186.
[15] YUAN L，ZHAO H，CHEN H，et al. Nonlinear MPC-based slip control for electric vehicles with vehicle safety constraints[J]. Mechatronics，2016，38(1)：1-15.
[16] JALALI M，HASHEMI E，KHAJEPOUR A，et al. A combined-slip predictive control of vehicle stability with experimental verification[J]. Vehicle System Dynamics，2018，56(2)：319-340.
[17] 郭孔辉. UniTire统一轮胎模型[J]. 机械工程学报，2016，52(12)：90-99. GUO Konghui. UniTire：Unified tire model[J]. Journal of Mechanical Engineering，2016，52(12)：90-99.
[18] ATAEI M，KHAJEPOUR A. Model predictive control for integrated lateral stability，traction/braking control，and rollover prevention of electric vehicles[J]. Vehicle System Dynamics，2019，65(6)：4440-4458.
[19] JALALI M，KHAJEPOUR A，CHEN S，et al. Integrated stability and traction control for electric vehicles using model predictive control[J]. Control Eng. Pract.，2016，54(1)：256-266.
[20] ATAEI M，KHAJEPOUR A，JEON S. A novel reconfgurable integrated vehicle stability control withomni actuation systems[J]. IEEE Trans. Veh. Technol.，2017，67(4)：2945-2957.
[21] GUO K，LU D，CHEN S-K，et al. The UniTire model：A nonlinear and non-steady-state tyre model for vehicle dynamics simulation[J]. Vehicle System Dynamics，200543(Suppl.)：341-358.
[22] GUO K，XU N，LU D，et al. A model for combined tire cornering and braking forces with anisotropic tread and carcass stiffness[J]. SAE Int. J. Commer. Veh.，2011，4(1)：84-95.
[23] 许男. 复合工况下轮胎稳态模型研究[D]. 长春：吉林大学，2012. XU Nan. Study on the steady state tire model under combined conditions[D]. Changchun：Jilin University，2012.
[24] 李小雨，许男，仇韬，等. 各向异性刚度对轮胎力学特性及车辆操纵性的影响[J]. 吉林大学学报，2020，50(2)：389-398. LI Xiaoyu，XU Nan，QIU Tao，et al. Influence of anisotropic stiffness on tire mechanical properties and vehicle handling characteristics under combined slip situations[J]. Journal of Jilin University，2020，50(2)：389-398.
[25] FALCONE P，ERIC H，BORRELLI F，et al. MPC-based yaw and lateral stabilization via active front steering and braking[J]. Vehicle System Dynamics，2008，46(Suppl.)：611-628.
[26] HASHEMI E，PIRANI M，KHAJEPOUR A，et al. Corner-based estimation of tire forces and vehicle velocities robust to road conditions[J]. Control Engineering Practice，2017，61：28-40.
[27] MIRZAEI M. A new strategy for minimum usage of external yaw moment in vehicle dynamic control system[J]. Transport. Res. Part C：Emerg. Technol.，2010，18(2)：213-225.
[28] BOBIER C，BEAL C，KEGELMAN J，et al. Vehicle control synthesis using phase portraits of planar dynamics[J]. Vehicle System Dynamics，2019，57(9)：1318-1337.
[29] FERREAU H，KIRCHES C，POTSCHKA A，et al. qpOASES：A parametric active-set algorithm for quadratic programming[J]. Math. Program Comput.，2014，6(4)：327-363.
[30] ZHAO H，GAO B，REN B，et al. Integrated control of in-wheel motor electric vehicles using a triple-step nonlinear method[J]. Journal of the Franklin Institute，2015，352(2)：519-540.
[31] YUAN L，ZHAO H，CHEN H，et al. Nonlinear MPC-based slip control for electric vehicles with vehicle safety constraints[J]. Mechatronics，2016，38(1)：1-15.