ON THE ORGANIZATIONAL AND INFORMATIONAL MODEL OF AGILE MANUFACTURING SYSTEM

Abstract

Abstract: Analyzed here are the kinds of the organic units of the Agile Manufacturing System (AMS) and their relationship. It is exptained that by its very nature the AMS is advantageous to reengineering for the characteristics of modularization, dynamics and scalable. Meanwhile, an object-oriented model of AMS information is proposed with an illustration of the message transitive way in the reengineering process. Thus the model of organization and information of AMS is established both in statics and dynamics.

Key words: Agile manufacturing, Model, Object-oriented method, Organization Information

CLC Number:

F406

Yang Xiaoyuan. ON THE ORGANIZATIONAL AND INFORMATIONAL MODEL OF AGILE MANUFACTURING SYSTEM[J]. , 1998, 34(2): 33-38.

[1]	DONG Zhigang, WANG Zhongwang, RAN Yichuan, BAO Yan, KANG Renke. Advances in Ultrasonic Vibration-assisted Milling of Carbon Fiber Reinforced Ceramic Matrix Composites [J]. Journal of Mechanical Engineering, 2024, 60(9): 26-56.
[2]	CUI Xin, LI Changhe, ZHANG Yanbin, YANG Min, ZHOU Zongming, LIU Bo, WANG Chunjin. Force Model and Verification of Magnetic Traction Nanolubricant Grinding [J]. Journal of Mechanical Engineering, 2024, 60(9): 323-337.
[3]	WEI Rong, XU Moran, LI Changping, LI Shujian, LI Pengnan. Modeling of Multi-energy Field and Regulation Optimization for Electric Discharge Assisted Milling (EDAM) of Titanium Alloys [J]. Journal of Mechanical Engineering, 2024, 60(9): 393-409.
[4]	HAN Jianchao, ZHANG Mengfei, WANG Bin, GUO Shenghui, JIA Yi, WANG Tao. Analysis of Electroplastic Constitutive Equation and Multi-physical Field Coupling of Titanium Alloy [J]. Journal of Mechanical Engineering, 2024, 60(9): 421-433.
[5]	ZHANG Yunshu, WU Bintao, ZHAO Yun, DING Donghong, PAN Zengxi, LI Huijun. Research Progress in the Numerical Simulation of Heat and Mass Transfer during Wire Arc Additive Manufacturing [J]. Journal of Mechanical Engineering, 2024, 60(8): 65-80.
[6]	ZHANG Yusen, CHEN Lei, LIU Shengjie, HU Junhua, ZHANG Qifei, CUI Mingliang, HU Jianliang, JIN Miao. Mechanism for the Macrostructure Coarse Grain of TB6 Titanium Alloy Die Forging and Its Prediction [J]. Journal of Mechanical Engineering, 2024, 60(8): 121-131.
[7]	XIE Chenyang, HUANG Jiao, XIAO Guangming, ZHANG Xianjie, WANG Junbiao, LI Yujun. A Algorithm to Generate Representative Volume Elements for Unidirectional Composites Considering Fiber Misalignment [J]. Journal of Mechanical Engineering, 2024, 60(8): 186-195.
[8]	SHI Qin, JIANG Zhengxin, LIU Yiwen, WEI Yujiang, HU Xiaosong, HE Lin. Fractional Order Model-based Estimation for State of Charge in Lithium-ion Battery [J]. Journal of Mechanical Engineering, 2024, 60(8): 224-232,244.
[9]	WANG Fang, HU Shenghui, HU Lin, PENG Ke, SHI Liangliang, WU Hequan, ZOU Tiefang, ZHOU Zhou. Research on Injury Prevention Effectiveness of Cyclist Helmet in Typical Road Cycling Accident Scenarios [J]. Journal of Mechanical Engineering, 2024, 60(8): 256-270.
[10]	ZHANG Hang, FU Kuan, CHEN Minghao, LI Rui, SHI Xinna. Dynamic Evolution and Vibration Reduction Analysis of Multi-section Serial In-pipe Inspection Robot When Crossing Obstacles [J]. Journal of Mechanical Engineering, 2024, 60(8): 348-359.
[11]	CHENG Hongxin, LI Luyi, ZHOU Changcong. Method for Sensitivity Analysis of the Uncertain Distribution Parameters Based on Kriging Model and Surrogate Sampling [J]. Journal of Mechanical Engineering, 2024, 60(8): 370-383.
[12]	LIU Shuiqing, FU Jingyuan, SHEN Xiao, HAN Xu. Wear Modeling and Uncertainty Analysis of Impact Needle for Dispensing Robot [J]. Journal of Mechanical Engineering, 2024, 60(7): 34-44.
[13]	ZHANG Jun, WU Chengyang, FANG Hanliang, SUN Zaichao, WANG Kailong, TANG Tengfei. Investigation on Driving Characteristics of a Z4 Redundantly Actuated Parallel Manipulator [J]. Journal of Mechanical Engineering, 2024, 60(7): 66-78.
[14]	SHANG Deyong, HUANG Xinyi, HUANG Yunshan, ZHANG Tianyou. Research on Rigid-flexible Coupling Dynamics of Delta Parallel Robot Based on Kane Equation [J]. Journal of Mechanical Engineering, 2024, 60(7): 124-133.
[15]	ZHENG Yang, ZHAO Zihao, LIU Wei, YU Zhengzhe, NIU Wei, LEI Yiwen, SUN Ronglu. Research Progress in High-performance Mg Alloys Prepared by Additive Manufacturing [J]. Journal of Mechanical Engineering, 2024, 60(7): 385-400.

ON THE ORGANIZATIONAL AND INFORMATIONAL MODEL OF AGILE MANUFACTURING SYSTEM

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments