3D FINITE ELEMENT SIMULATION OF HYDROGEN DIFFUSION IN 16MnR STEEL WELDMENT

Abstract

Abstract: Hydrogen diffusion coefficients in weld metal, heat affected zone (HAZ) and base metal of the 16MnR steel weldment are determined by using electrochemical permeation technique. A 3D sequential coupling calculating method on hydrogen diffusion is developed based on the finite element code-ABAQUS. The effects of welding residual stress and microstructure on the hydrogen diffusion are taken into account. The hydrogen concentration versus time is obtained. The hydrogen concentration accumulation and welding residual stress is much larger in weld metal and HAZ, which will increase the cracking probability related to the hydrogen under the stress.

Key words: Different microstructure, Finite element analysis, Hydrogen diffusion, Residual stress, Weldment

CLC Number:

TG457

GONG Jianming;JIANG Wenchun;TANG Jianqun;CHEN Hu;TU Shandong. 3D FINITE ELEMENT SIMULATION OF HYDROGEN DIFFUSION IN 16MnR STEEL WELDMENT[J]. , 2007, 43(9): 113-118.

[1]	CHEN Zhaojie, XIE Jin, LIU Junhan, XIONG Changxin, LI Difan. Study on Impulse-discharge Driven Abrasive Flow Assisted Grinding of Monocrystalline SiC [J]. Journal of Mechanical Engineering, 2024, 60(9): 383-392.
[2]	ZHAO Chengwei, ZHANG Wenhao, GONG Tiancheng, ZHANG Yiyun, WANG Changtao, LUO Xiangang. Optimal Design and Analysis of Ultra-flat Adsorption Loading for Planar Optical Components [J]. Journal of Mechanical Engineering, 2024, 60(5): 241-248.
[3]	HU Long, LIU Hongyan, CHENG Huimei, CHEN Weiqi, FENG Guangjie, YE Yanhong, DENG Dean. Study on Residual Stress of Multi-layer and Multi-pass Butt-welded Joint for Ultra-high Strength Wear-resistant Steel NM500 [J]. Journal of Mechanical Engineering, 2024, 60(4): 335-344.
[4]	MA Yongtao, SUN Ning, WANG Junlong, LI Chunfan, LU Chunsheng, ZHANG Bin, LIU Lanrong. Calculation of Shot Peening Coverage of Pre-mixed Jet and its Influence on the Surface Integrity of Carburized Steel [J]. Journal of Mechanical Engineering, 2024, 60(3): 393-404.
[5]	ZENG Shaoxi, ZHAO Chuntian, LI Hongmei. Response of Magnetic Flux Leakage Signal to Tensile Stress in Ferromagnetic Material [J]. Journal of Mechanical Engineering, 2024, 60(20): 68-76.
[6]	ZHAO Xin, HUANG Jinjie. Optimization Methodology for Additive Manufacturing Parameter by Fused Deposition Modeling (FDM) Based on RSM-RVEA [J]. Journal of Mechanical Engineering, 2024, 60(19): 277-297.
[7]	LI Yiran, YAO Junping, LIANG Chaoqun, XIAO Peng, CHEN Guoxin, LI Buwei. Crack Initiation and Propagation Mechanism of SiC/AZ91D Composites During Uniaxial Tensile Process Based on Three-dimensional Microstructure [J]. Journal of Mechanical Engineering, 2024, 60(16): 160-170.
[8]	DENG Zhiming, HUANG Tudi, HUANG Hongzhong, WEI Xunkai, WANG Hao. Study on Load Spectrum of Evolution Accelerated Test for Fatigue Spalling of Angular Contact Ball Bearings under Varying Working Conditions [J]. Journal of Mechanical Engineering, 2024, 60(13): 193-204.
[9]	FENG Mingxiang, JIANG Qinglei, WANG Xuyan. Influence of Stress-free Temperature and Model Simplification in Life Evaluation of CCGA Packages [J]. Journal of Mechanical Engineering, 2024, 60(12): 268-276.
[10]	ZHANG Jiyin, YAO Changfeng, TAN Liang, CUI Minchao, ZHOU Zheng, SUN Yunqi, LI Guoxi, FAN Yi. Research Progress of the Effect of Shot Peening Residual Stress on Fatigue Performance and Deformation Control [J]. Journal of Mechanical Engineering, 2023, 59(6): 46-60.
[11]	HE Haifeng, LIU Huaiju, ZHU Caichao, LI Gaomeng, CHEN Difa. Quantitative Effect of Residual Stress on Gear Bending Fatigue [J]. Journal of Mechanical Engineering, 2023, 59(4): 53-61.
[12]	LÜ Yingying, BAO Guangqing. Optimization and Characteristic Analysis of HTS Double-stator Permanent Magnet Vernier Machine [J]. Journal of Electrical Engineering, 2023, 18(3): 175-183.
[13]	ZHAO Dongcai, MA Zhanji, LIU Xingguang, ZHENG Jun, ZHANG Ziyang. Study on Mechanical Properties of Nitrogen-doped ta-C Thin Films Prepared by Multi-stage Triggered Pulsed Arc Source Technology [J]. Journal of Mechanical Engineering, 2023, 59(24): 108-117.
[14]	DING Zishan, TENG Yikang, GUO Miaoxian, LI Gaopeng, MAI Yunfei, WU Chongjun, GUO Feng, LIN Jiejun. Research on Analytical Model of Grinding Residual Stress Considering the Influence of Microstructure [J]. Journal of Mechanical Engineering, 2023, 59(23): 372-390.
[15]	ZHENG Lei, SUN Xiaohan, Lü Dongming, LIU Ziwen, ZHU Zhuozhi, DONG Xianglong, WEI Wendong. Simulation and Process Study on the Rotary Ultrasonic Vibration Trepanning Drilling of GFRP [J]. Journal of Mechanical Engineering, 2023, 59(23): 391-400.

3D FINITE ELEMENT SIMULATION OF HYDROGEN DIFFUSION IN 16MnR STEEL WELDMENT

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments