STUDY ON PREDICTION OF THE PARTS’DISTORTION DUE TO MILLING MACHINING BASED ON ORTHOGONAL CUTTING SIMULATION

Abstract

Abstract: A method based on orthogonal cutting simulation is proposed to predict the distortion of parts due to milling machining, and a finite element model for 3D milling process is set up. The transient cutting temperature and cutting force is solved by using the results of orthogonal cutting simulation, and then is put on the finite element model to simulate the milling process and predict the distortion of part. The distortion of parts due to milling process could be predicted by numerical method. The mathematical models and simulation results are in agreement with the distortion of parts measured on site.

Key words: Milling process, Orthogonal cutting, Transient cutting force, Transient temperature

CLC Number:

TH123.2

Huang Zhigang;Ke Yinglin;Wang Litao;Xu De. STUDY ON PREDICTION OF THE PARTS’DISTORTION DUE TO MILLING MACHINING BASED ON ORTHOGONAL CUTTING SIMULATION[J]. , 2004, 40(11): 117-122.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2004/V40/I11/117

[1]	WANG Dongqian, SUN Yiwen, XING Yanming, ZHANG Xin, CAI Yonglin, ZHANG Lei, LIANG Zhiqiang. Research on a Self-inductive Smart Tool holder System for Temperature-Vibration Collaborative Measurement Based on a Halbach Array [J]. Journal of Mechanical Engineering, 2026, 62(2): 35-47.
[2]	YANG Xiao, DU Yanbin, YANG Zhen, LINGHU Langlang, LI Benjie. Transient Temperature Field Study of Dry Hob Spindle System Based on Thermal Network under Time-Varying Tool Shifting [J]. Journal of Mechanical Engineering, 2026, 62(1): 408-420.
[3]	ZHANG Jin, DENG Chenjie, LUO Taimin, LUO Daixin, TAO Guibao, CAO Huajun. Advances in Ultrasonic Vibration-assisted Milling Equipment and Intelligent Machining of CFRP [J]. Journal of Mechanical Engineering, 2025, 61(7): 24-48.
[4]	XU Jie, FENG Pingfa, YUE Qizhong, SHANG Kaifeng, WANG Yutian, FENG Feng. Experimental Study on High-speed Orthogonal Cutting of Unidirectional CFRP Composites [J]. Journal of Mechanical Engineering, 2025, 61(7): 109-119.
[5]	YUE Caixu, DU Jianbiao, LIU Xianli, LIANG S Y, WANG Lihui, GAO Haining, LI Hengshuai. Modeling Research on Transient Temperature Field of Rake Face on End Mills Considering Time-varying Heat Intensity and Time-varying Distribution Ratio [J]. Journal of Mechanical Engineering, 2019, 55(9): 206-216.
[6]	CHEN Bing, LIU Wei, LUO Ming, ZHANG Xiaoteng. Reverse Identification of John-Cook Constitutive Parameters of Superalloy Based on Orthogonal Cutting [J]. Journal of Mechanical Engineering, 2019, 55(7): 217-224.
[7]	DOU Wei, CUI Gangwei, YUAN Shengwan, HE Xiaocong. Analysis of Uncut Milling Chip Thickness Based on Trochoidal Tooth Path [J]. Journal of Mechanical Engineering, 2019, 55(7): 234-242.
[8]	QI Zhenchao, LIU Shunuan, CHENG Hui, MENG Qingxun, LI Yuan. Research on the Mesoscopic Cutting Mechanism of CFRP Based on Three-dimensional Multiphase Finite Element Models [J]. Journal of Mechanical Engineering, 2016, 52(15): 170-176.
[9]	Ding Jie,Zhang Ping. Fast Calculation of Transient Temperature Field for Thyristor Module [J]. Journal of Electrical Engineering, 2016, 11(12): 37-44.
[10]	JIANG Feng;YAN Lan;XU Xipeng;RONG Yiming. Mechanical Model of Contact Stress Distribution between Cutting Tool and Chip [J]. , 2014, 50(5): 188-193.
[11]	LIU Xianbo;LONG Xinhua;MENG Guang;GUO Zhiming. The Identifications of Milling Force Coefficients and Eccentricity Based on Multi-objective Optimization in Frequency-domain [J]. , 2011, 47(7): 185-190.
[12]	KONG Yuan;LIU Weijun;WANG Yuechao;BIAN Hongyou;ZHAO Yuhui. Numerical Simulation of Temperature Field and Stress Field of Direct Laser Metal Deposition Shaping Process of Titanium Alloys [J]. , 2011, 47(24): 74-82.
[13]	ZHOU Xia;TANG Zhanfei;QU Guohui. Finite Element Analysis on Thermal Fatigue Failure of the Continuous Casting Tundish Cover [J]. , 2010, 46(12): 70-75.
[14]	ZHANG Shijun;LIU Zhanqiang;LIU Jigan. Calculating Transient Temperature Distribution of Single-coated Tool in High Speed Cutting [J]. , 2010, 46(1): 187-193.
[15]	LI Hongtao;LAI Xinmin;LI Chengfeng;NI Jun;LIN Zhongqin. DEVELOPMENT OF MESO-SCALE MILLING MACHINE TOOL AND ITS PERFORMANCE ANALYSIS [J]. , 2006, 42(11): 162-167.

STUDY ON PREDICTION OF THE PARTS’DISTORTION DUE TO MILLING MACHINING BASED ON ORTHOGONAL CUTTING SIMULATION

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments