METHOD FOR GENERATING INTERFERENCE-FREE TOOL PATH FOR REAL-TIME SURFACE INTERPOLATION

›› 2001, Vol. 37 ›› Issue (5): 93-96.

• Article • Previous Articles Next Articles

METHOD FOR GENERATING INTERFERENCE-FREE TOOL PATH FOR REAL-TIME SURFACE INTERPOLATION

Wu Guanglin;Ni Qimin;Li Congxin;Ruan Xueyu

Shanghai Jiaotong University

Published:2001-05-15

Abstract

CLC Number:

TP391.73

Wu Guanglin;Ni Qimin;Li Congxin;Ruan Xueyu. METHOD FOR GENERATING INTERFERENCE-FREE TOOL PATH FOR REAL-TIME SURFACE INTERPOLATION[J]. , 2001, 37(5): 93-96.

[1]	MA Feng, HUANG Shunhu, LIU Peiji, ZHANG Hua. Multi-objective Optimization Method of CFRP Drilling Process Parameters for Power and Drilling Quality [J]. Journal of Mechanical Engineering, 2023, 59(11): 290-299.
[2]	YANG Yun, ZHU Mengrui, LI Huimin, DU Zhengchun, YANG Jianguo. Volumetric Error Modelling and Compensation for Batch of Vertical Machining Centers Based on Sensitivity Analysis [J]. Journal of Mechanical Engineering, 2020, 56(7): 204-212.
[3]	LIU Xianli, FAN Mengchao, JI Wei, WANG Guangyue, ZHAO Zemin. Ellipsoid End Mill Design and Tool Path Generation Algorithm [J]. Journal of Mechanical Engineering, 2018, 54(15): 199-212.
[4]	LIU Xianli, ZHOU Xiaoyang, LI Maoyue, DING Yunpeng, DING Wenbin. The Real-time Algorithm of NURBS Curve Retriever Interpolation with S-type Acceleration and Deceleration Control [J]. Journal of Mechanical Engineering, 2017, 53(3): 183-192.
[5]	MA Feng, ZHANG Hua, CAO Huajun. Multi-objective Machining Parameters Optimization for Low Energy and Minimum Cutting Fluid Consumption [J]. Journal of Mechanical Engineering, 2017, 53(11): 157-163.
[6]	LI Li, DENG Xingguo, SHANG Chuanbo. Tool Path Optimization with High-efficiency and Low Energy Consumption for Surface CNC Machining [J]. Journal of Mechanical Engineering, 2017, 53(11): 184-194.
[7]	YAN Wei, ZHANG Hua, JIANG Zhigang. A Multi-source and Dynamic Energy Modeling Method of Machining Tools Based on BPMN and its Application [J]. Journal of Mechanical Engineering, 2017, 53(11): 195-202.
[8]	XU Rufeng;CHEN Zhitong. Method of Five-axis Tool Radius Compensation Based on Post-processor [J]. , 2014, 50(13): 157-164.
[9]	LI Congbo;CUI Longguo;LIU Fei;LI Li. Multi-objective NC Machining Parameters Optimization Model for High Efficiency and Low Carbon [J]. , 2013, 49(9): 87-96.
[10]	ZHOU Bo;ZHAO Jibin;LIU Weijun. Method Study on Optimization of Tool Axis Vector for Complex Surface of 5-Axis CNC [J]. , 2013, 49(7): 184-192.
[11]	ZHOU Bo;ZHAO Jibin;LIU Weijun;LI Lun. Processing Calculation Method of 5-axis NC Spiral Trajectory Based on Parametric Surface Mapping [J]. , 2013, 49(5): 100-109.
[12]	GENG Cong;YU Dong;ZHANG Han. Tool Orientation Smooth Interpolation Algorithm for Five-axis CNC Machining [J]. , 2013, 49(3): 180-185.
[13]	CAI Yonglin;ZHAO Mingbo;WANG Heng. Tool Path Planning of NC Machining for Surface Similar to Revolution Body [J]. , 2013, 49(21): 38-43.
[14]	ZHANG Yongnian;ZHAO Dongbiao;LU Yonghua;LIU Kai. Optimal Tool Orientation for Five-axis Flat-end Cutter Machining [J]. , 2012, 48(5): 180-186.
[15]	YANG Xujing;ZHOU Yuansheng CHEN Zezhong;WANG Fulin. Analysis and Control of Tool Path Interpolation Error in Rotary Axes Motions of Five-axis CNC Milling [J]. , 2012, 48(3): 140-146.

METHOD FOR GENERATING INTERFERENCE-FREE TOOL PATH FOR REAL-TIME SURFACE INTERPOLATION

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments