VIBRATION CONTROL OF FLEXIBLE LINKAGE MECHANISMS----A REVIEW

›› 2001, Vol. 37 ›› Issue (10): 10-13.

• Article • Previous Articles Next Articles

VIBRATION CONTROL OF FLEXIBLE LINKAGE MECHANISMS----A REVIEW

Song Yimin;Zhang Ce;Yu Yueqing;Ma Wengui

Tianjin University Beijing Polytechnic University Tianjin Institute of Textile Engineering

Published:2001-10-15

Abstract

Abstract: The state-of-the-arts of vibration control of flexible linkage mechanisms are summarized. The methodologies for suppressing the elastodynamic response of flexible linkage mechanisms, such as passive control, active control and hybrid control, are discussed. Some problems to be resolved are pointed out and finally the future trends of this field are presented.

Key words: Active control, Flexible linkage mechanisms, Hybrid control, Passive control, Vibration

CLC Number:

TH112.1

Song Yimin;Zhang Ce;Yu Yueqing;Ma Wengui. VIBRATION CONTROL OF FLEXIBLE LINKAGE MECHANISMS----A REVIEW[J]. , 2001, 37(10): 10-13.

[1]	SU Zhipeng, LIANG Zhiqiang, LI Juan, WANG Fei, WEI Zhengyi, LIU Yuehong, KIM Yoomi, MA Yue, YIN Zhen, WANG Xibin. Experimental Research on Ultrasonic Spiral Assisted Milling and Grinding of Titanium Alloy Micro Groove [J]. Journal of Mechanical Engineering, 2024, 60(9): 5-12.
[2]	WU Hanqiang, CHEN Zhuo, YE Ximin, ZHANG Shibo, LI Sisi, ZENG Jiang, WANG Qiang, WU Yongbo. Fundamental Research on the Ultrasonic Assisted Plasma Oxidation Modification Grinding of Titanium Alloy [J]. Journal of Mechanical Engineering, 2024, 60(9): 13-25.
[3]	DONG Zhigang, WANG Zhongwang, RAN Yichuan, BAO Yan, KANG Renke. Advances in Ultrasonic Vibration-assisted Milling of Carbon Fiber Reinforced Ceramic Matrix Composites [J]. Journal of Mechanical Engineering, 2024, 60(9): 26-56.
[4]	LIANG Fengshuang, WU Mingyang, LIU Lifei. Research on Mechanism and Subsurface Damage Characteristics of SiC Ultrasonic Grinding Based on Material Impact Characteristics [J]. Journal of Mechanical Engineering, 2024, 60(9): 75-85.
[5]	CHEN Shoufeng, WANG Chengyong, LI Weiqiu, DING Feng, LU Yaoan, ZHOU Yuhai. Material Removal Mechanism and Surface Quality Evaluation of Graphite Ultrasonic Vibration Milling [J]. Journal of Mechanical Engineering, 2024, 60(9): 86-96.
[6]	ZHOU Jingguo, ZHANG Yuhang, SUI Tianyi, XING Denghai, DONG Baokun, FU Qingyu, FU Junfan, LIN Bin. Effect of Separation-contact on the Processing Characteristics of Ultrasonic Vibration-assisted Milling of Titanium Alloy [J]. Journal of Mechanical Engineering, 2024, 60(9): 97-113.
[7]	WU Shujing, WANG Dazhong, GU Guquan, HUANG Shuai, DONG Guojun, GUO guoqiang, AN Qinglong, LI Changhe. High-performance Machining of Complex Curved Surfaces in Multi-energy Fields: Key Technologies and Advancements [J]. Journal of Mechanical Engineering, 2024, 60(9): 152-167.
[8]	ZHANG Hang, FU Kuan, CHEN Minghao, LI Rui, SHI Xinna. Dynamic Evolution and Vibration Reduction Analysis of Multi-section Serial In-pipe Inspection Robot When Crossing Obstacles [J]. Journal of Mechanical Engineering, 2024, 60(8): 348-359.
[9]	XU Fengyu, MA Kaiwei, SONG Julong, FAN Baojie, WU Xinjun. Vibration Reduction Mechanism and Control Method of Cable Climbing Robot Based on Spring-magnetorheological Damper [J]. Journal of Mechanical Engineering, 2024, 60(8): 384-395.
[10]	LUO Zhong, SHI Baolong, WU Fayong, LI Yuqi, LIU Kaining, ZHANG Xiaoxia. Study on the Vibration Characteristics of Bolted Joint Rotor System Considering Assembly Technology [J]. Journal of Mechanical Engineering, 2024, 60(8): 396-406.
[11]	SUN Shilin, WANG Tianyang, CHU Fulei. Review of Structural Health Monitoring of Wind Turbine Blades Based on Vibration and Acoustic Measurement [J]. Journal of Mechanical Engineering, 2024, 60(7): 79-92.
[12]	HE Dongping, WANG Tao, LIU Yuanming, XU Huidong, WANG Jun, WANG Zhihua. Review of Theoretical Studies on Vibration in Strip Rolling Mill [J]. Journal of Mechanical Engineering, 2024, 60(7): 93-113.
[13]	WANG Tengfei, SUN Wenjing, ZHOU Jinsong, GONG Dao, WANG Qiushi, ZHANG Zhanfei. Research on Compiling Vibration Load Spectrum of Equipment mounted on Bogie Frame Based on Fatigue Damage Spectrum [J]. Journal of Mechanical Engineering, 2024, 60(6): 287-295.
[14]	WEI Jing, LIU Zhirou, WEI Haibo, XU Ziyang. Time-space Transformation Method of Vibration Displacement and Dynamic Strain in Nodal-diameter Vibration of High-speed Thin-walled Gear [J]. Journal of Mechanical Engineering, 2024, 60(5): 70-80.
[15]	MA Zhaozhao, ZHOU Ruiping, YANG Qingchao, LEE Heow Pueh, CHAI Kai. Dynamic Characteristics of a Two-stage Quasi-zero-stiffness Vibration Isolation System with Electromagnetic Shunt Damping [J]. Journal of Mechanical Engineering, 2024, 60(5): 157-168.

VIBRATION CONTROL OF FLEXIBLE LINKAGE MECHANISMS----A REVIEW

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments