SIMULATION ON TIG WELDING ARC BASING ON ARC-WELD POOL UNIFORM MODEL

Abstract

Abstract: TIG welding is chosen as the studied object. Arc-weld pool uniform model is established and welding arc is analyzed basing on this model. This model avoided the assumption that anode surface temperature is constant which made simulation on arc more near to real situation and also made the foundation for combining welding arc and weld pool together. ANSYS software is adopted and achieved the varied anode surface temperature with time and current density distribution on anode surface. The distribution of heat flux was in accordant with current density distribution. The main reason causing arc pressure by magnetic force and fluid flow is revealed. Current density and arc pressure distribution are proved by experiments.

Key words: ANSYS, Arc-weld pool, TIG, Uniform model

CLC Number:

TG403

Lu Fenggui;Yao Shun;Qian Weifang. SIMULATION ON TIG WELDING ARC BASING ON ARC-WELD POOL UNIFORM MODEL[J]. , 2004, 40(5): 145-149.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2004/V40/I5/145

[1]	FENG Xiaoming, WAN Zhenping, SUN Dongsheng, LONG Yuanxiang. Research Status and Development Trends of Brake Force-amplifying Transmission Mechanisms [J]. Journal of Mechanical Engineering, 2026, 62(8): 1-20.
[2]	SHI Nannan, GAO Haitao, TANG Leqian, KONG Charlie, YU Hailiang. Investigation on AA7075 Strips Subjected to Cryorolling and Cryogenic Treatment and Their Fatigue Crack Propagation Performance [J]. Journal of Mechanical Engineering, 2026, 62(6): 47-64.
[3]	LIU Changyong, WU Huaian, LI Chen, HUANG Kehao, LIU Zhiyuan, CHEN Zhangwei, ZHANG Lei. Investigation on the Four-axis Multi-material Simultaneous 3D Printing Based on Rotating Nozzle [J]. Journal of Mechanical Engineering, 2026, 62(5): 399-407.
[4]	LU Kaiyi, WANG Zeng, WANG Xianliang, LU Zehua, LIU Huaiju. Fatigue Reliability Analysis of Aero-engine Gear Transmission System Considering Thermal-mechanical Loads [J]. Journal of Mechanical Engineering, 2026, 62(3): 407-419.
[5]	ZHAN Jiatong, LIU Zhizhong, YE Xiongyue, SHI Yonghua, ZHONG Shaotao. Study on Multi-mode Magnetic Control Power Supply and Weld Sem Formation Optimization Mechanism for K-TIG Backing Welding of 9%Ni Steel [J]. Journal of Mechanical Engineering, 2026, 62(2): 157-169.
[6]	CHEN Yao, LIU Xiao, ZHANG Zhendi, ZHANG Shanglin, GUO Nan, WU Jun. Impact of TIG Welding Parameters on the Microstructure and Properties of Ti-4Al-2V Welds [J]. Journal of Mechanical Engineering, 2026, 62(2): 207-217.
[7]	XU Ning, SUN Zhanyong, YANG Chao, REN Zunsong, YANG Guangxue, ZHOU Yichang, QU Sheng. Experimental Study on Fatigue Damage Characteristics of Equipment Compartment Bottom Plates of EMU [J]. Journal of Mechanical Engineering, 2026, 62(2): 250-260.
[8]	HU Bin, ZHAO Xin, ZHANG Xin, LUO Yifei, LU Liantao, WEN Zefeng. Study on Rail Rolling Contact Fatigue Model in Consideration of Transient Rolling Contact Solutions within Wheel-rail Contact Patch [J]. Journal of Mechanical Engineering, 2026, 62(2): 354-366.
[9]	LI Jing, XU Tianhao, LUO Ming. A Review of Aero-engine Compressor Blade Cutting Technology for High Fatigue Performance [J]. Journal of Mechanical Engineering, 2025, 61(9): 23-45.
[10]	LIAO Ding, ZHU Shunpeng, NIU Xiaopeng, HE Jinchao, WANG Qingyuan. Probabilistic Fatigue Research of Mechanical Structures: State-of-the-Art and Future Trends [J]. Journal of Mechanical Engineering, 2025, 61(8): 47-74.
[11]	ZHAO Lihui, WANG Zhen, LIU Tianyin, LIU Dongjian, WENG Shuo, ZHANG Dongdong. Research on Fatigue Life Prediction Method of High-speed Ball Bearing of Electric Drive System under Random Load [J]. Journal of Mechanical Engineering, 2025, 61(8): 214-227.
[12]	FU Haoning, GUAN Qinghua, WANG Peng, WEN Zefeng. Vibration Damping of Subway Resilient Wheel on Fastening Clips in Rail Corrugation Section [J]. Journal of Mechanical Engineering, 2025, 61(8): 240-249.
[13]	WANG Chenguang, WANG Haihang, YANG Jie, FAN Zhilei, ZHOU Entao, GE Ende, AN Qinglong, CHEN Ming. The Effect of Expansion Deformation on the Damage of Hole Wall and Fatigue Performance of Carbon Fiber Reinforced Composite Materials [J]. Journal of Mechanical Engineering, 2025, 61(7): 134-143.
[14]	ZHANG Shuyue, WANG Wenjian, LIN Qiang, GUO Jun, LIU Qiyue, Maksym Spriyagin, Qing Wu. Effect of Surface Defect Spacing and Alignment on Rail Rolling Contact Fatigue Damage [J]. Journal of Mechanical Engineering, 2025, 61(6): 194-205.
[15]	WANG Wenjing, DONG Ziyu, DAI Sen, LI Guangquan, ZHANG Zhenxian. Research on Vibration Characteristics and Fatigue Damage of Sanding Device of High Speed Train [J]. Journal of Mechanical Engineering, 2025, 61(4): 229-238.

SIMULATION ON TIG WELDING ARC BASING ON ARC-WELD POOL UNIFORM MODEL

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments