| [1] |
ZHOU Ning, YAO Jianyong, DENG Wenxiang.
Neural Network-based Robust Intelligent Control of Proportional Servo Valve Center with Flow Force Compensation
[J]. Journal of Mechanical Engineering, 2024, 60(4): 126-133.
|
| [2] |
DU Yanbin, WANG Aoting, HE Kun.
Tooth Contact Analysis of Helical Gears with Longitudinal Modification Considering Twist Errors
[J]. Journal of Mechanical Engineering, 2024, 60(3): 143-154.
|
| [3] |
WU Jie, SHEN Yifu, HUANG Guoqiang.
Investigation into the Microstructure and Properties of 2024Al TIG Joint with Wire Filler Subjected to Friction Stir Processing
[J]. Journal of Mechanical Engineering, 2024, 60(20): 153-161.
|
| [4] |
KONG Lingxing, WEI Wei, YAN Qingdong, CHEN Xuemei, HUANG Yan.
Joint Simulation of Coupled Flow in Hydrodynamic Retarders and Its Hydraulic Control System
[J]. Journal of Mechanical Engineering, 2024, 60(12): 355-364.
|
| [5] |
CHEN Rui, CHENG Shimin, WEN Shicheng, ZHAO Ziheng, PENG Ruitao, HU Congfang, XIAO Xiangwu.
Structural Optimization of 7150-T6 Aeronautical Aluminum Alloy Thin-walled Open Circular Tube Based on J-C Model Modification
[J]. Journal of Mechanical Engineering, 2024, 60(11): 95-104.
|
| [6] |
CHEN Yonghua, SUN Zhenguo, ZHANG Wen, CHEN Qiang.
Research on High Efficiency Weld Modification Technology for Wall-climbing Robot
[J]. Journal of Mechanical Engineering, 2023, 59(9): 12-19.
|
| [7] |
CHEN Yisi, LU Gang, YAN Qingsong, HUANG Puying, XU Pian, MAO Pu, ZHOU Zeyuan.
Mechanical Properties and Creep Mechanism of Yttrium and Cerium Modified ZL114A alloy via Vacuum Counter-pressure Casting
[J]. Journal of Mechanical Engineering, 2023, 59(18): 186-195.
|
| [8] |
YANG Wenzhen, LIU Yu, LIU Rui, XIE Jin, XIONG Zhuang, TANG Bin, XU Kang.
Preparation of Lyophobic Surface via Etching-phase Separation Method for Improving Threshold Performance of Microfluidic Inertial Switch
[J]. Journal of Mechanical Engineering, 2023, 59(18): 349-356.
|
| [9] |
LIU Xinrong, WANG Huipeng, WANG Zhonghou, YANG Yongming.
Influence of Wide-swath Machining Error on Transmission Error of Topological Modification Gear Transmission System
[J]. Journal of Mechanical Engineering, 2023, 59(15): 131-141.
|
| [10] |
WANG Hong, WANG Bing, LIU Zhanqiang, ZHAO Jinfu, SONG Qinghua.
Research Progress on Machinability Improvement of Difficult-to-machine Materials with Surface Modification Methods
[J]. Journal of Mechanical Engineering, 2023, 59(15): 311-332.
|
| [11] |
SHI Zhaoyao, ZHAO Baoya, YU Bo, GUO Xiaozhong.
Characterization and Decomposition of Gear 3-D Deviation
[J]. Journal of Mechanical Engineering, 2022, 58(6): 1-9.
|
| [12] |
ZHU Lin, WANG Peng, JIA Min-ping, XU Fei-yun.
Analysis Approach for Influencing Factors of Structural Reliability Based on Response Surface Corrected Sensitivity Model
[J]. Journal of Mechanical Engineering, 2022, 58(22): 160-167.
|
| [13] |
LI Hao, CHENG Jia-hui, SUN Chun-ya, LI Ke, XIE Gui-zhong, WANG Hao-qi, HUANG Rong-jie, HAO Bing, LIU Jun, WANG Xin-chang.
Numerical Simulation and Analysis of Large-scale Particle Fluid System Based on CFD-DPM Method
[J]. Journal of Mechanical Engineering, 2022, 58(22): 450-461.
|
| [14] |
FANG Junpeng, WANG Qian, CAI Jian, WAN Hanlin, SONG Changming, ZHENG Kai, ZHOU Yikang.
Research on Low-temperature Bonding Technology Using Metal Nanoparticles Prepared by Magnetron Sputtering
[J]. Journal of Mechanical Engineering, 2022, 58(2): 34-42.
|
| [15] |
KE Wenchao, CONG Baoqiang, QI Zewu, AO Sansan, PANG Bowen, GUO Wei, PENG Bei, CENG Zhi.
Arc-fused Coating Process and Micro-joining Mechanism of NiTi Shape Memory Alloys
[J]. Journal of Mechanical Engineering, 2022, 58(2): 176-184.
|
