| [1] |
CHEN Junjie, TANG Yuzhou, YANG Shujun, WU Mingyu.
Constitutive Model of Anisotropic Hyper-viscoelasticity for Double-layer Cord Reinforced Air Spring Rubber Bellows
[J]. Journal of Mechanical Engineering, 2026, 62(8): 49-59.
|
| [2] |
FAN Bo, HU Bo, CHEN Ziming, YAO Jiantao.
Multi-objective Optimization of Unmanned Loader Shovel Trajectory Based on Non-uniform Rational B-spline
[J]. Journal of Mechanical Engineering, 2026, 62(7): 185-195.
|
| [3] |
LIN Shuilin, HU Bowen, SUN Jianliang, PENG Yan.
Dynamic Modeling and Response Analysis of Defective Four-row Roller Bearings in Rolling Mills under Multi-load Excitation
[J]. Journal of Mechanical Engineering, 2026, 62(4): 12-24.
|
| [4] |
LI Danyang, LIN Yonggang, GU Yajing, LIU Hongwei, XU Zhiliang, FU Deyi.
Hydrostatic Oriented Support Loading Technology of Large Wind Turbine Ground Test Bench
[J]. Journal of Mechanical Engineering, 2026, 62(4): 309-317.
|
| [5] |
PAN Xueting, YANG Fei, GENG Zhongtai, YUE Honghao, XU Jinsui, WANG Zheping.
Review of Flexible Robot Stiffness Modulation Strategies
[J]. Journal of Mechanical Engineering, 2026, 62(3): 311-339.
|
| [6] |
LU Kaiyi, WANG Zeng, WANG Xianliang, LU Zehua, LIU Huaiju.
Fatigue Reliability Analysis of Aero-engine Gear Transmission System Considering Thermal-mechanical Loads
[J]. Journal of Mechanical Engineering, 2026, 62(3): 407-419.
|
| [7] |
WANG Shibo, GE Shirong, GUAN Zenglun, ZHOU Shilin, WANG Lijie, LI Xuefeng, WANG Yun, YUAN Xiaoming, MA Guangjun.
Research on Real-time Cutting Load of Longwall Shearer Drum for Digital Twins
[J]. Journal of Mechanical Engineering, 2026, 62(3): 479-491.
|
| [8] |
YANG Shaofei, WANG Dongliang, LI Jianqiang, ZHANG Ming, LU Songbing.
Response Analysis of Landing Leg Deployment and Landing Transient Impact of Reusable Launch Vehicle
[J]. Journal of Mechanical Engineering, 2026, 62(1): 159-170.
|
| [9] |
PANG Yuanlong, LI Chuanyang, HU Changhua, ZHANG Zeming, LENG Mingzhe, WANG Zhaoqiang.
Design and Control of a Test Bench with Linear Loading Electric Servo Mechanism
[J]. Journal of Mechanical Engineering, 2026, 62(1): 229-240.
|
| [10] |
PEI Shiyuan, HU Dejian, QIN Chuan, ZHANG Lei.
Analysis and Optimization Design of Lubrication Load Characteristics for Large Dual-flow Oil Seal Pads under High Hydrogen Pressure with Multiple Coupling Fields
[J]. Journal of Mechanical Engineering, 2026, 62(1): 272-284.
|
| [11] |
LUAN Wenlin, WANG Yuanding, WANG Haoming, LIU Yan, LI Xianglong, XU Fangcheng.
Theoretical Analysis on the Impact of Spiral Groove Structural Parameters on Static Characteristics of Novel Hybrid Gas Foil Thrust Bearing with Spiral Grooves
[J]. Journal of Mechanical Engineering, 2025, 61(9): 358-371.
|
| [12] |
JIANG Wenjuan, WANG Wenjian, DING Haohao, LIU Qiyue.
Study on Ratcheting Behavior of Flash Butt Welds in U71Mn Rail
[J]. Journal of Mechanical Engineering, 2025, 61(8): 116-126.
|
| [13] |
ZHAO Lihui, WANG Zhen, LIU Tianyin, LIU Dongjian, WENG Shuo, ZHANG Dongdong.
Research on Fatigue Life Prediction Method of High-speed Ball Bearing of Electric Drive System under Random Load
[J]. Journal of Mechanical Engineering, 2025, 61(8): 214-227.
|
| [14] |
XIAO Zhao, CAO Zhihui, DENG Jiewen, DUAN Shuyong, ZHAO Qiancheng, DAI Juchuan, TAO Jie.
Wind Turbine Load Prediction Method Combining Fiber Bragg Grating Sensor Data and Gated Recurrent Units Neural Network
[J]. Journal of Mechanical Engineering, 2025, 61(8): 272-282.
|
| [15] |
LI Chenxi, GUO Pengcheng.
Influence of Tip Design and Structural Parameters on Aerothermal Performance in High-load Turbine
[J]. Journal of Mechanical Engineering, 2025, 61(8): 283-296.
|
