| [1] |
WANG Zedong, HE Yingqi, DAI Yanjun, TAO Wenquan, WANG Yungang.
Experimental Study on Cavitation Flow Characteristics in Orifice Plate under High Pressure Conditions
[J]. Journal of Mechanical Engineering, 2026, 62(6): 370-379.
|
| [2] |
YANG Fei, ZHAO Lei, GE Lei, WANG Xiaohu, QUAN Long, XIONG Xiaoyan.
Composite Pressure Control Method of Electro Hydraulic Power Source Based on Pressure Closed Loop Feedback and Speed Compensation
[J]. Journal of Mechanical Engineering, 2026, 62(6): 400-408.
|
| [3] |
HUANG Xiaomin, GUO Tong, QUE Fumin, LI Xinming, LIU Hao, LIN Tianliang.
Novel Configuration of High-pressure Radial Piston Motor with Plate Pilot Pressure Control for Two-stage Flow Distribution and Its Volumetric Efficiency Characteristics
[J]. Journal of Mechanical Engineering, 2026, 62(6): 409-418.
|
| [4] |
ZHAO Penghao, LIU Jianhua, GONG Hao, WANG Xingjie.
Sub-regional Virtual Material Equivalent Modeling of Joint Interface Based on Fractal Contact Theory and Semi-analytical Method
[J]. Journal of Mechanical Engineering, 2026, 62(5): 230-243.
|
| [5] |
QIU Bo, SUN Biao, AO Xiaohui, XING Shuming, WANG Dong.
Effect of Squeeze Casting Pressure on Interfacial Bonding Properties of ZTA/HCCI Composites
[J]. Journal of Mechanical Engineering, 2026, 62(2): 195-206.
|
| [6] |
LIU Fangbo, XIAO Xinbiao, ZHANG Jie, YANG Jizhong.
Study on the Vibro-acoustic Characteristics of Pantograph Flat Roof of High-speed Train Body under Aerodynamic Excitation
[J]. Journal of Mechanical Engineering, 2026, 62(2): 261-270.
|
| [7] |
WEI Renlei, MA Hongpeng, WU Shuai, CHEN Taiqi, JIAO Zongxia.
Asymmetric Variable Damping Characteristics of Two-stage Telescopic Hydraulic Damper
[J]. Journal of Mechanical Engineering, 2026, 62(1): 182-194.
|
| [8] |
ZHANG Pengfei, AN Chenhui, LI Wenjun, FENG Kai.
Overview and Prospect on Ground Effect Simulation Technology of Aircraft and Vehicles
[J]. Journal of Mechanical Engineering, 2025, 61(9): 314-334.
|
| [9] |
YAO Jing, ZHANG Hao, SONG Yingzhe, WANG Pei.
Composite Passive Stabilizer Structure Design for Pressure Pulsation of Digital Valve Package
[J]. Journal of Mechanical Engineering, 2025, 61(8): 344-351.
|
| [10] |
ZHOU Ruiquan, ZHANG Mindi, ZHENG Hanwen, HAN Lei, HUANG Biao.
Influence of Composite Boundary’s Thickness on Collapse Mechanism of Single Cavitation Bubble
[J]. Journal of Mechanical Engineering, 2025, 61(6): 285-298.
|
| [11] |
SHI Minghui, XIA Yongjie, ZHANG Shaolin, GUO Hong, WU Peibiao.
Theoretical and Experimental Study on Static Characteristics of Porous Tilting Pad Dynamic and Static Pressure Gas Thrust Bearings
[J]. Journal of Mechanical Engineering, 2025, 61(5): 97-107.
|
| [12] |
XU Jiahui, KANG Renke, ZHU Xianglong, DONG Zhigang, LI Meng.
Research on Dynamic Characteristics of Air Static Pressure Spindle for Silicon Wafer Grinding Machine
[J]. Journal of Mechanical Engineering, 2025, 61(5): 108-116.
|
| [13] |
ZHANG Zhouwei, DAI Deshan, WANG Yahong, NIU Xuzhuan.
Research on Pressure Drop Characteristics of Fluid Spiral Flow in Cryogenic Wound Pipe
[J]. Journal of Mechanical Engineering, 2025, 61(5): 297-307.
|
| [14] |
CHEN Baolin, LU Zhuqing, ZHOU Jiming, JU Luyan, QI Lehua.
Preparation and Stiffness Property of Cf/Mg Composite Special-shaped Thin Parts Fabricated by Liquid-solid Extrusion Following Vacuum Pressure Infiltration
[J]. Journal of Mechanical Engineering, 2025, 61(4): 107-115.
|
| [15] |
SHAO Dong, YIN Siwei, LI Liang, WANG Xiangyu, WEI Lingtao, ZHOU Daolin.
Estimation and Control of ESC Brake-by-wire Pressure Based on Neural Network
[J]. Journal of Mechanical Engineering, 2025, 61(4): 219-228.
|