NUMERICAL ANALYSIS OF DEPTH OF SURFACE WORK-HARDENING

›› 1995, Vol. 31 ›› Issue (3): 102-106.

• Article • Previous Articles Next Articles

NUMERICAL ANALYSIS OF DEPTH OF SURFACE WORK-HARDENING

Yang Jichang;Lau W S

Jiangsu University of Science and Technology Hong Kong Polytechnic University

Published:1995-05-01

Abstract

Abstract: Introduces a criterion for predicting the surface work-hardening depth in low speed orthogonal cutting, which is based-on the theory of metal plastic formation. The elastic-plastic stress field in deformation zone is analyzed. The equations of boundary load on the shear plane are formulated. The relative stress and work-hardening depth in surface are calculated by simulating machined surface formation process. The numerical analysis is verified experimentally.

Key words: Low speed cutting, Numerical calculation, Work-hardening

Yang Jichang;Lau W S. NUMERICAL ANALYSIS OF DEPTH OF SURFACE WORK-HARDENING[J]. , 1995, 31(3): 102-106.

[1]	WANG Liang, LUO Jian, HU Yong, XIA Hongchao, YAO Jianhua. Study on Process Parameters of Coaxial Laser Melt Injection with Spherical WC Reinforcement Particles [J]. Journal of Mechanical Engineering, 2021, 57(7): 253-261.
[2]	LI Ying, CHEN Dongjing, WANG Bozhong, TONG Haisheng, KONG Xiangdong, ZHANG Jin. Movement Law of Single Bubble in Static Oil [J]. Journal of Mechanical Engineering, 2021, 57(24): 93-101.
[3]	HUANG Zundi, CHI Maoru, FENG Yonghua, CHANG Ning, WANG Qianxuan. Study on the Aerodynamic Change Law of EMU Bogies of Running-across-lines under Cross-wind Effect [J]. Journal of Mechanical Engineering, 2020, 56(22): 219-226.
[4]	WU Bangzhi, QIN Datong, HU Jianjun, LIU Yonggang. Analysis of Temperature Field of Wet Clutch Considering Contact Stress Field and Cooling Flow Field of Friction Pair [J]. Journal of Mechanical Engineering, 2020, 56(22): 190-200.
[5]	ZHANG Mingyuan, LU Liantao, TANG Mingming, ZENG Dongfang. Research on Numerical Calculation Method of Critical Load for Bolt Loosening under Transverse Loading [J]. Journal of Mechanical Engineering, 2018, 54(5): 173-178.
[6]	DENG Xingqiao, FENG Zhipeng, LI Shuangcen, WANG Jie, WANG Jinge. Analyze the Influence of Key Parameters on the Contact Zone for the Planar Enveloping Internal-meshing Worm Drive [J]. Journal of Mechanical Engineering, 2018, 54(23): 47-55.
[7]	MA Gang;HE Jun;LI Xiuhua;SHEN Xinmin. Numerical Calculation of Dynamic Coefficients for Gas Film Cylinder Seal [J]. , 2013, 49(5): 55-62.
[8]	LI Renxian;LIU Jie;QI Zhendang;ZHANG Weihua. Air Pressure Pulse Developing Regularity of High-speed Trains Crossing in Open Air [J]. , 2011, 47(4): 125-130.
[9]	GUO Xiaomei;ZHU Zuchao;CUI Baoling;LI Yi. Analysis of Cavitation and Flow Computation of Inducer [J]. , 2010, 46(4): 122-128.
[10]	GAO Fudong;JIANG Lehua;PAN Cunyun. Numerical Calculation on Hydrodynamic Characteristics for the Amphibious Vehicle Based on Computational Fluid Dynamics [J]. , 2009, 45(5): 134-139.
[11]	JIA Yunfei;KONG Deren. Distributing Characteristic of Dynamic Pressure Field of Vortex Flowmeter [J]. , 2009, 45(10): 101-105.
[12]	ZHANG Xing;CHEN Honghai;JI Zhongli;WANG Jinhong. Characterization of Flow Field in the Exit of Pulse Jet Nozzle for High-temperature Filtrating [J]. , 2009, 45(10): 96-100.
[13]	ZHANG Dajie;GAO Dianrong;WANG Youjie;GUO Mingjie. Numerical Calculation and Analysis of Electro-magnetic Field of Axial Piston Hydraulic Motor Pump Based on ANSYS [J]. , 2008, 44(12): 69-74.
[14]	KONG Fanyu;CHEN Gang;CAO Weidong;SUN Jian;JI Jiangang. NUMERICAL CALCULATION OF MAGNETIC FIELD IN MAGNETIC COUPLINGS OF MAGNETIC PUMP [J]. , 2006, 42(11): 213-218.
[15]	Wang Yongjun;Huang Yunhua;Wang Junbiao;Wei Shengmin;Hui Xiaopeng. ALGORITHM OF GENERATING THE TRACKING LOCUS OF THE TANGENT POINT FOR NC ROTARY STRETCH-BENDING FORMER [J]. , 2005, 41(10): 123-127.

NUMERICAL ANALYSIS OF DEPTH OF SURFACE WORK-HARDENING

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments