Actual Kinematics Performance Analysis for Lower Degrees of Freedom Parallel Manipulators

Abstract

Abstract: For lower degree of freedom parallel robot, the relations between revolute pair and prismatic pair are analyzed by using screw theory. According to the relations, the constraint errors due to manufacturing and installation are proposed. Three basic types of constraint errors are identified, and an approach to evaluating the effects of constraint errors on characteristics of parallel manipulators is proposed. The modeling for the lower degree of freedom parallel robot with identical limbs of constraint errors is established. The actual motion is analyzed in order to validate the theory.

Key words: Constraint errors, Kinematics pair, Parallel manipulator, Screw theory

CLC Number:

TP242

HAN Shukui;FANG Yuefa;GUO Sheng. Actual Kinematics Performance Analysis for Lower Degrees of Freedom Parallel Manipulators[J]. , 2009, 45(9): 58-63.

[1]	ZHANG Jun, WU Chengyang, FANG Hanliang, SUN Zaichao, WANG Kailong, TANG Tengfei. Investigation on Driving Characteristics of a Z4 Redundantly Actuated Parallel Manipulator [J]. Journal of Mechanical Engineering, 2024, 60(7): 66-78.
[2]	LIU Xiaofei, WAN Bo, CHEN Ran, YUAN Huiming, ZHAO Yongsheng. Kinematics Performance Analysis and Optimization of Symmetrical Super-redundant Parallel Manipulators 6RPS [J]. Journal of Mechanical Engineering, 2024, 60(1): 235-247.
[3]	CHU Hongpeng, QI Bai, WANG Huiqi, QIU Xuesong, ZHOU Yulin. 6-DOF Wheeled Parallel Robot and Its Design Method [J]. Journal of Mechanical Engineering, 2023, 59(3): 46-53.
[4]	YANG Chao, HUANG Fengli, YE Wei, CHEN Qiaohong. Elastodynamic Modeling and Analysis of a 2PRU-UPR Over-constrained Parallel Manipulator [J]. Journal of Mechanical Engineering, 2023, 59(21): 209-223.
[5]	LI Haihong, DONG Jinan, GUO Shanguo, LIU Zhiqi. Analysis and Design Method for Non-uniform Parallel Mechanism Structure of Dynamic/Static Platform [J]. Journal of Mechanical Engineering, 2023, 59(17): 116-125.
[6]	WANG Chengzhi, WANG Yunchao. Influence of Clearances and Force State of Joints on Steering Error of Spatial Steering Mechanism [J]. Journal of Mechanical Engineering, 2022, 58(4): 240-249.
[7]	WANG Shijie, FENG Wei, LI Tiejun, ZHANG Jianjun, YANG Dong, LIU Jinyue. Kinematic Performance Analysis of Spatial 2-DOF Redundantly Actuated Parallel Manipulator [J]. Journal of Mechanical Engineering, 2022, 58(23): 18-27.
[8]	WANG Yaojun, ZHANG Haifeng, LI Qinchuan. Dynamics Modeling, Force Optimization and Force/Position Hybrid Control for a Vex4 Redundantly Actuated Parallel Robot [J]. Journal of Mechanical Engineering, 2022, 58(23): 65-74.
[9]	HU Bo, GAO Junlin, HUO Yan, ZHANG Da, ZENG Daxing, LU Wenjuan. Inverse Position Analysis of Two Kinds of 6-DOF Serial-parallel Manipulators Based on Conformal Geometric Algebra [J]. Journal of Mechanical Engineering, 2022, 58(21): 60-68.
[10]	YANG Chao, YE Wei, CHEN Qiaohong. Sensitivity Analysis and Multi-objective Optimization Design of Parallel Manipulators [J]. Journal of Mechanical Engineering, 2022, 58(19): 229-241.
[11]	WANG Sen, HAN Xueyan, LI Haotian, LI Haoran, LI Shihua. Research on Synthesis Method of a Loop Decoupling Two-rotation Parallel Mechanism with Large Load Bearing Capacity [J]. Journal of Mechanical Engineering, 2021, 57(21): 68-77.
[12]	SUN Jing, SHAN Yanxia, ZHANG Jianwei, SHAO Lei, LI Shihua. Research on Synthesis Method of Novel Parallel Mechanisms with Equivalent Motion to Serial-parallel Mechanism [J]. Journal of Mechanical Engineering, 2021, 57(1): 1-7.
[13]	CHEN Miao, ZHANG Qing, CHEN Wentao, QIN Xianrong, SUN Yuantao. Analysis and Type Synthesis of Parallel Mechanisms without Parasitic Motion based on Spatial Geometry [J]. Journal of Mechanical Engineering, 2021, 57(1): 77-85.
[14]	ZHU Jialong, HUANG Zhirong, ZHENG Shikun, XU Yundou, DUAN Yuzhu, MA Xiaofei. Configuration Synthesis and Networking Design of Triangular Pyramid Deployable/Foldable Mechanism [J]. Journal of Mechanical Engineering, 2020, 56(5): 29-38.
[15]	HU Bo, SHI Dongsheng, SHI Yanguo, ZHANG Da, YE Nijia. Kinematically Identical Manipulators for an Asymmetric 3-PRS Parallel Manipulator and Their Constraint Performance Comparison Study [J]. Journal of Mechanical Engineering, 2020, 56(3): 31-40.

Actual Kinematics Performance Analysis for Lower Degrees of Freedom Parallel Manipulators

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments