OPTIMIZATION DESIGN AND TEST RESEARCH FOR ATTITUDE SIMULATING DEVICE OF A DOCKING SIMULATING TEST BED

Abstract

Abstract: Based on the requests of the ground docking simulation test facility, air bearing, fluid bearing and turn table attitude simulating device are analyzed, a bending resistant attitude simulating device is presented from above analysis, it is light, large stiffness and intensity, little friction torque. The bending resistant attitude simulating device are optimized with ANSYS, the whole mass are reduced 23%. Because of special use condi-tions of the bearing, the friction torque of the attitude simulat-ing device are test, data shows that the friction torque of the passive docking simulation test facility is 5.6 N·m, the active’s is 1.32 N·m. It is shown that the bending resistant attitude simulating device is one convenient device which makes the docking on the ground equal to that in space.

Key words: Attitude simulating device, Docking simulation test facility, Friction torque, Optimization design

CLC Number:

V526

CHEN Zhigang;WANG Wuyi;ZHANG Guangyu. OPTIMIZATION DESIGN AND TEST RESEARCH FOR ATTITUDE SIMULATING DEVICE OF A DOCKING SIMULATING TEST BED[J]. , 2006, 42(3): 202-205.

[1]	LÜ Liye, LU Yujun, WANG Shuo, LIU Yin, LI Kunpeng, SONG Xueguan. Survey and Prospect of Surrogate Model Technique and Application [J]. Journal of Mechanical Engineering, 2024, 60(3): 254-281.
[2]	WANG Xu, JIANG Xingyu, YANG Guozhe, SUN Meng, YU Shenhong, BI Kaihang, ZHAO Rizheng, LIU Weijun. Research on Optimization of Human-Machine Interface Layout of Laser Cleaning Equipment Based on PSO-SSA [J]. Journal of Mechanical Engineering, 2024, 60(20): 372-387.
[3]	PENG Xiang, CHEN Kenan, WANG Mingbo, Yi Bing, LI Jiquan, JIANG Shaofei. Optimization Design of Stacking Sequence for Variable Thickness Composite Structure Based on Improved Stacking Sequence Table Method [J]. Journal of Mechanical Engineering, 2024, 60(19): 199-211.
[4]	ZHAO Feng, HU Weifei, LI Guang, DENG Xiaoyu, LIU Zhenyu, GUO Yunfei, TAN Jianrong. Multi-objective Optimization Design Method Based on a Hybrid Metric Adaptive Sampling Surrogate Model [J]. Journal of Mechanical Engineering, 2024, 60(13): 81-91.
[5]	ZHANG Guang-dong, HUANG Xiang. Optimization Design Method of Plastic Extrusion Die for Product Geometric Accuracy [J]. Journal of Mechanical Engineering, 2023, 59(8): 142-150.
[6]	ZHAO Jiajia, SONG Xianchun, JIANG Hongkui, LIN Mingxing, SONG Liwei. Modeling and Analysis of Friction Torque of Ball Screw Considering the Thermal Elastohydrodynamic Lubrication [J]. Journal of Mechanical Engineering, 2023, 59(3): 176-188.
[7]	HOU Zhenghang, HE Weiping, WANG Shuxia, HU Yupeng, XIAO Yifan. Research on Dynamic Assembly Technology of Arc-tooth Type Seeker Servomechanism Based on Digital Twin [J]. Journal of Mechanical Engineering, 2023, 59(22): 433-443.
[8]	ZHANG He, LI Haiming, ZHANG Jiashan, REN Hao, LI Haotian, ZHAO Jie. Key Technologies and Research Progress of Continuum Manipulators for Minimally Invasive Laparoscopic Surgery [J]. Journal of Mechanical Engineering, 2023, 59(19): 44-64.
[9]	HUO Jiaji, YU Hongjie, PAN Xin, JIANG Zhinong, BIN Guangfu. Pneumatic-liquid Type Automatic Balancing System for Large-scale Rotating Equipment [J]. Journal of Mechanical Engineering, 2023, 59(18): 121-129.
[10]	CHEN Hongyue, ZHANG Zhanli, WANG Xin, ZHOU Liqiu, SHA Yongdong. Research of Coil Spring for Refrigeration Linear Compressor [J]. Journal of Mechanical Engineering, 2022, 58(3): 167-176.
[11]	LU Jun, JI Baoshuang, JIA Shijie, ZHANG Yuanxin. Structural Optimization Design of Self-sensing Actuator Based on MSMA [J]. Journal of Electrical Engineering, 2022, 17(2): 251-256.
[12]	YANG Chao, YE Wei, CHEN Qiaohong. Sensitivity Analysis and Multi-objective Optimization Design of Parallel Manipulators [J]. Journal of Mechanical Engineering, 2022, 58(19): 229-241.
[13]	HE Xiwang, YANG Liangliang, RAN Renjie, ZHU Fawen, SONG Xueguan. Comparative Studies of Surrogate Models Based on Multiple Evaluation Criteria [J]. Journal of Mechanical Engineering, 2022, 58(16): 403-419.
[14]	QIU Shuoxian, XU Fangcheng. Experimental Study on the Effect of Top Foil Sagging on the Performance of Thrust Foil Bearing [J]. Journal of Mechanical Engineering, 2022, 58(15): 226-232,242.
[15]	CHEN Weiwei, SHI Wenze, LU Chao, CHENG Jinjie, CHEN Yao, CHEN Guo. Optimal Design of Spiral Coil EMAT for Online and Rapid Detection of High-temperature Forgings [J]. Journal of Mechanical Engineering, 2022, 58(10): 12-23.

OPTIMIZATION DESIGN AND TEST RESEARCH FOR ATTITUDE SIMULATING DEVICE OF A DOCKING SIMULATING TEST BED

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments