| [1] |
DONG Zhigang, WANG Zhongwang, RAN Yichuan, BAO Yan, KANG Renke.
Advances in Ultrasonic Vibration-assisted Milling of Carbon Fiber Reinforced Ceramic Matrix Composites
[J]. Journal of Mechanical Engineering, 2024, 60(9): 26-56.
|
| [2] |
WANG Pai, BAI Yifan, ZHAO Wenxiang, ZHANG Yibo, LIU Zhibing.
Research on Surface Integrity Evolution of Short Arc Assisted Milling of Superalloy
[J]. Journal of Mechanical Engineering, 2024, 60(9): 434-444.
|
| [3] |
YANG Yang, WANG Zekui, CHEN Chen, MA Hua, YANG Zhinan, ZHANG Fucheng.
Effect of Ni and Cu Alloying on Microstructure and Mechanical Properties of Fe-Mn-Al-C Austenitic Lightweight Steel
[J]. Journal of Mechanical Engineering, 2024, 60(8): 154-164.
|
| [4] |
LI Li, WANG Yixuan, LUO Fen, ZHANG Wentao, ZHAO Wei, LI Xiaoqiang.
Effect of Brazing Time on TiAl Joint Brazed with TiH2-65Ni+TiB2 Filler
[J]. Journal of Mechanical Engineering, 2024, 60(8): 176-185.
|
| [5] |
ZOU Xiaolong, YANG Guangxue, ZHANG Bo, LI Guoshun, ZHANG Yichao, CHEN Can, ZHANG Shujun.
Study on Dynamic Stress Characteristics of Bogie Frame of High-speed EMU
[J]. Journal of Mechanical Engineering, 2024, 60(8): 212-223.
|
| [6] |
HOU Xuzhao, MA Yue, XIANG Changle.
Research on Steering Stability Control of Electric Drive Tracked Vehicle
[J]. Journal of Mechanical Engineering, 2024, 60(8): 233-244.
|
| [7] |
ZHANG Hang, FU Kuan, CHEN Minghao, LI Rui, SHI Xinna.
Dynamic Evolution and Vibration Reduction Analysis of Multi-section Serial In-pipe Inspection Robot When Crossing Obstacles
[J]. Journal of Mechanical Engineering, 2024, 60(8): 348-359.
|
| [8] |
WANG Junjiu, LIU Jinyu, HOU Xiujuan, QI Zhenguo, LI Zhimin, LIU Tao.
Hybrid Mechanistic and Data-driven Modeling Method of Compliant Assembly Variation Prediction for Train Body
[J]. Journal of Mechanical Engineering, 2024, 60(6): 177-186.
|
| [9] |
HAN Jing, ZHANG Zheng, SONG Yuanming, SUN Qisheng, LIU Zhiyuan, SUN Jiapeng, CAO Chao, ZHAO Jiyun.
Preparation, Microstructure and Properties of High-performance Gradient Nanostructured Pure Ti Plate by USSR
[J]. Journal of Mechanical Engineering, 2024, 60(6): 227-235.
|
| [10] |
REN Zhongkai, LI He, XU Yanan, CHENG Qian, FENG Hao, WANG Tao.
Constitutive Model and Microstructural Evolution for Tensile Behavior of Carbon Steel Ultrathin Strip under Pulsed Electric Field
[J]. Journal of Mechanical Engineering, 2024, 60(6): 245-260.
|
| [11] |
WANG Boshi, CHEN Nannan, CAI Yan, WANG Min.
Low-temperature Fatigue Ductile-to-brittle Transition Behavior and Mechanism for Simulated Coarse-grained Heat-affected Zone of a High-strength Low-alloy Bainite Steel
[J]. Journal of Mechanical Engineering, 2024, 60(6): 271-278.
|
| [12] |
ZHOU Chen, XU Feixiang.
Multi-objective Optimization Method for Steering Mode Switch Trajectory of Four-wheel Independent Steering Vehicle
[J]. Journal of Mechanical Engineering, 2024, 60(6): 306-320.
|
| [13] |
CHAI Yiyang, ZHANG Lele, DOU Weiyuan, ZHANG Haifeng.
Parallel NSGA-III Based Multi-objective Optimization for Side Wall Section Size of High-speed Train Car-body
[J]. Journal of Mechanical Engineering, 2024, 60(6): 321-333.
|
| [14] |
ZHOU Zuyi, YANG Yuwei, QI Wenyao, GONG Jianchao, LI Zhaotong.
Method of Equivalent Inverse Solution of Multi-rigid-flexible Body Dynamics and Performance Optimization Synthesis of Waist Exoskeleton Robot
[J]. Journal of Mechanical Engineering, 2024, 60(5): 107-118.
|
| [15] |
CUI Guihan, YANG Chunli.
Strengthening and Toughening Mechanism of Weld Metals on GMAW-P of High Strength and High Toughness Welding Wire
[J]. Journal of Mechanical Engineering, 2024, 60(4): 326-334.
|
