Analysis on Vibration Signals of Rotating Machinery Based on Elliptic Fourier Descriptors

Abstract

Abstract: Based on elliptic Fourier descriptors, vibration signals measured from the same section of the orbit by a couple of sensor mounted in radial direction 90º apart are analyzed in data fusion. The theoretical expression of filtered orbit is derived. The full spectrum, the holospectrum, and the vector spectrum are compared, a general theoretical framework for these three kinds spectrum is proposed, and a numerical method to obtain these three kinds spectrum by one Fourier transform is designed. The vector ellipse spectrum which is synthesized by the full spectrum, the holospectrum, and the vector spectrum is proposed as a new method to analyze synchronous vibration signals. The comparison shows that the vector ellipse spectrum is simple and feasible.

Key words: Elliptic Fourier descriptors, Full spectrum, Holospectrum, Rotating machinery, Vector spectrum

CLC Number:

TH165 TN911

YANG Yanli;MIAO Changyun;KANG Dali. Analysis on Vibration Signals of Rotating Machinery Based on Elliptic Fourier Descriptors[J]. , 2012, 48(13): 102-107.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2012/V48/I13/102

[1]	SHAO Haidong, XIAO Yiming, ZHONG Xiang, HAN Te. Model Calibration Method for Trustworthy Mechanical Fault Diagnosis [J]. Journal of Mechanical Engineering, 2025, 61(17): 114-123.
[2]	XIAO Yang, WANG Huaqing, LI Hua, WANG Qingfeng. Cross-domain Fault Diagnosis Method Based on Refined Composite Zoom Multi-scale Weighted Permutation Entropy [J]. Journal of Mechanical Engineering, 2025, 61(16): 28-39.
[3]	ZHANG Wendi, LI Hongguang, ZHOU Jiwen, WANG Jinhong, LI Zhenping. Research on Improved Vibration Measurement of Rotating Machinery Based on Image Phase and General Curvelet Transform [J]. Journal of Mechanical Engineering, 2024, 60(24): 35-44.
[4]	ZHANG Zongzhen, WANG Jinrui, HAN Baokun, BAO Huaiqian, LI Shunming. Early Stage Fault Diagnosis Method of Bearings Based on Nonlinear Sparse Blind Deconvolution [J]. Journal of Mechanical Engineering, 2023, 59(16): 157-166.
[5]	XIAO Yang, WANG Qingfeng, YANG Zhe, XU Wei, SHU Yue, CHEN Wenwu. Research on Incipient Warning and Diagnosis Method of Sudden Unbalance Fault for Rotating Machinery [J]. Journal of Mechanical Engineering, 2023, 59(11): 308-318.
[6]	ZHOU Jian, ZHENG Lian-yu, WANG Yi-wei, WANG Yi-chuan. Automatic Model Creation Method of Hierarchical Parallel Network Model for Transfer Diagnosis of Rotating Machinery [J]. Journal of Mechanical Engineering, 2022, 58(22): 115-128.
[7]	LI Feng, XIANG Wang, CHEN Yong, TANG Baoping, WANG Jiaxu. State Degradation Trend Prediction Based on Double Hidden Layer Quantum Circuit Recurrent Unit Neural Network [J]. Journal of Mechanical Engineering, 2019, 55(6): 83-92.
[8]	YU Kun, LUO Zhitao, LI Hongfei, MA Hui. General Parameterized Synchrosqueezing Transform and Its Application in Rotating Machinery Vibration Signal [J]. Journal of Mechanical Engineering, 2019, 55(11): 149-159.
[9]	LI Feng, TANG Baoping, WANG Jiaxu, LIN Jianhui. Fault Identification Method Based on Graph-implanted Probability-based Semi-supervised Discriminant Analysis [J]. Journal of Mechanical Engineering, 2017, 53(9): 92-100.
[10]	HUANG Chuanjin, MENG Yajun, LEI Wenping, HAN Jie. Full Vector Envelope Technique Based on Complex Local Mean Decomposition and Its Application in Fault Feature Extraction for Rotor System [J]. Journal of Mechanical Engineering, 2016, 52(7): 69-78.
[11]	PAN Xin, WU Haiqi, GAO Jinji. Rotating Machinery Targeting Self-recovery Regulation System for Imbalance Vibration Fault with Liquid-transfer Active Balancing Device [J]. Journal of Mechanical Engineering, 2015, 51(1): 146-152.
[12]	MENG Zong;WANG Yachao. Rotating Machinery Fault Diagnosis Method Based on the Differential Local Mean Decomposition [J]. , 2014, 50(11): 101-107.
[13]	LI Hongkun;LIAN Xiaoting;ZHOU Shuai. Application on Weak Information Classification by Using Wavelet Scalogram Synchronous Averaging [J]. , 2013, 49(5): 32-38.
[14]	ZHAO Xiaoping;ZHAO Xiuli;HOU Rongtao;ZHENG Yuhui;YANG Wenping. A New Method for Instantaneous Frequency Estimation of Run-up or Run-down Vibration Signal for Rotating Machinery [J]. , 2011, 47(7): 103-108.
[15]	HU Aijun;XIANG Ling;TANG Guiji;DU Yongzuo. Fault Feature Extracting Method of Rotating Machinery Based on Mathematical Morphology [J]. , 2011, 47(23): 92-96.

Analysis on Vibration Signals of Rotating Machinery Based on Elliptic Fourier Descriptors

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments