RESEARCH ON THE ALGORITHM OF NC TOOL PATH CALCULATION FOR TRIANGULAR SURFACE MACHINING

›› 2002, Vol. 38 ›› Issue (10): 50-53.

• Article • Previous Articles Next Articles

RESEARCH ON THE ALGORITHM OF NC TOOL PATH CALCULATION FOR TRIANGULAR SURFACE MACHINING

Sun Yuwen;Liu Weijun;Wang Yuechao

Dalian University of Technology Shenyang Institute of Automation, Chinese Academy of Science

Published:2002-10-15

Abstract

Abstract: Triangular mesh model is widely used in CAD/CAM field, but there are few tool path calculation algorithms for it. Based on reconstructing topology relations of triangular meshes, an analyzing method of geometric characteristics for triangular surfaces is presented. Moreover, an accurate algorithm of tool path calculation is also discussed. The results show that the tool path calculation precision can be efficiently improved by the proposed method.

Key words: NC machining, Tool path, Triangular surface

CLC Number:

TP391.73

Sun Yuwen;Liu Weijun;Wang Yuechao. RESEARCH ON THE ALGORITHM OF NC TOOL PATH CALCULATION FOR TRIANGULAR SURFACE MACHINING[J]. , 2002, 38(10): 50-53.

[1]	DENG Jianxin, YUAN Bangyi, HUANG Qiulin, DING Dukun, XIN Manyu, LIU Guangming. Review on the Key Technologies of Complex Surfaces Polishing Based on Robots [J]. Journal of Mechanical Engineering, 2024, 60(7): 1-21.
[2]	LI Jianan, WEI Zhaocheng, FENG Jingyang, WANG Xueqin. Integral Impeller Fillet-end Milling Cutter Five-axis U Cycloid Stripping Milling Path Planning [J]. Journal of Mechanical Engineering, 2024, 60(7): 212-223.
[3]	MA Feng, HUANG Shunhu, LIU Peiji, ZHANG Hua. Multi-objective Optimization Method of CFRP Drilling Process Parameters for Power and Drilling Quality [J]. Journal of Mechanical Engineering, 2023, 59(11): 290-299.
[4]	LUO Laizhen, ZHAO Huan, WANG Hui, LI Xiangfei, DING Han. Pose Optimization and Tool Path Planning for Robotic Grinding of Complicated Curved Surface [J]. Journal of Mechanical Engineering, 2022, 58(3): 284-294.
[5]	LU Yaoan, CHEN Shoufeng, WANG Chengyong. Smooth Flank Milling Tool Path Generation for Blisk Surface with Barrel Cutters [J]. Journal of Mechanical Engineering, 2022, 58(1): 256-266.
[6]	YANG Yun, ZHU Mengrui, LI Huimin, DU Zhengchun, YANG Jianguo. Volumetric Error Modelling and Compensation for Batch of Vertical Machining Centers Based on Sensitivity Analysis [J]. Journal of Mechanical Engineering, 2020, 56(7): 204-212.
[7]	LIU Xianli, FAN Mengchao, JI Wei, WANG Guangyue, ZHAO Zemin. Ellipsoid End Mill Design and Tool Path Generation Algorithm [J]. Journal of Mechanical Engineering, 2018, 54(15): 199-212.
[8]	LI Li, DENG Xingguo, SHANG Chuanbo. Tool Path Optimization with High-efficiency and Low Energy Consumption for Surface CNC Machining [J]. Journal of Mechanical Engineering, 2017, 53(11): 184-194.
[9]	MA Feng, ZHANG Hua, CAO Huajun. Multi-objective Machining Parameters Optimization for Low Energy and Minimum Cutting Fluid Consumption [J]. Journal of Mechanical Engineering, 2017, 53(11): 157-163.
[10]	YAN Wei, ZHANG Hua, JIANG Zhigang. A Multi-source and Dynamic Energy Modeling Method of Machining Tools Based on BPMN and its Application [J]. Journal of Mechanical Engineering, 2017, 53(11): 195-202.
[11]	LIU Jun, ZHANG Jun, ZHAO Wanhua, LU Bingheng. Tool Path Generation for Long Turbine Blades Machined with Twin-cutters [J]. Journal of Mechanical Engineering, 2016, 52(11): 140-145.
[12]	FAN Wengang, YE Peiqing. Research Progress in Tool Path Planning for Five-axis End Milling Machining of Sculptured Surfaces [J]. Journal of Mechanical Engineering, 2015, 51(15): 168-182.
[13]	LIN Xiaojun;WANG Zhiwei;ZHANG Xinge;GAO Yuan;CHEN Yue;YANG Yan. Improved Algorithm for Clean-up Machining of Combinatorial-surface Model Based on Point-searching Method [J]. , 2014, 50(19): 191-198.
[14]	XU Rufeng;CHEN Zhitong. Method of Five-axis Tool Radius Compensation Based on Post-processor [J]. , 2014, 50(13): 157-164.
[15]	LI Congbo;CUI Longguo;LIU Fei;LI Li. Multi-objective NC Machining Parameters Optimization Model for High Efficiency and Low Carbon [J]. , 2013, 49(9): 87-96.

RESEARCH ON THE ALGORITHM OF NC TOOL PATH CALCULATION FOR TRIANGULAR SURFACE MACHINING

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments