• CN: 11-2187/TH
  • ISSN: 0577-6686

Journal of Mechanical Engineering ›› 2026, Vol. 62 ›› Issue (17): 334-345.doi: 10.3901/JME.260650

Previous Articles    

Mechanism Design and Kinematic Analysis of a Rigid-flexible Coupled Trunk Rehabilitation Robot

FENG Yongfei1, LIN Musong2, LI Lianqing3, LIU Yinuo3, LI Shijie1, WANG Hongbo3,4, NIU Jianye3   

  1. 1. School of Mechanical Engineering and Mechanics, Ningbo University, Ningbo 315211;
    2. Department of Environmental Engineering, Hebei University of Environmental Engineering, Qinhuangdao 066102;
    3. School of Mechanical Engineering, Yanshan University, Qinhuangdao 066000;
    4. Academy for Engineering and Technology, Fudan University, Shanghai 200433
  • Received:2025-12-04 Revised:2026-04-02 Published:2026-11-20

Abstract: To address the common issue of impaired trunk posture control in patients with neurological injuries, this research proposes a novel trunk rehabilitation robot with rigid–flexible coupled serial-parallel hybrid structure. Based on the physiological structure and motion center characteristics of the thoracolumbar spine, a dual-layer coordinated rehabilitation configuration is developed, consisting of a pneumatically actuated flexible upper vest and a 4UPS-RRR rigid lumbar exoskeleton mechanism, enabling compliant thoracic adjustment and stable lumbar support. The fabrication mold and casting process of the embedded pneumatic artificial muscles are designed, and a constraint chain co-point modeling method is established to achieve automatic alignment with the trunk motion center across different patient body types. Kinematic models are constructed for the upper and lower modules, respectively, and verified through parameter identification and ADAMS simulation. A prototype system is developed and validated through a series of functional experiments, including posture regulation, motion tracking, and actuator force distribution. Experimental results show that the posture error of the flexible module is less than 10%, the rigid lumbar exoskeleton mechanism achieves high tracking accuracy, and the forces of the actuating rods are evenly distributed. These findings confirm the effectiveness of the proposed structure and control strategy. This research provides a new approach and technical support for achieving highly adaptive and coordinated trunk rehabilitation training.

Key words: trunk rehabilitation robot, rigid-flexible coupling, pneumatic artificial muscle, serial-parallel hybrid mechanism

CLC Number: