• CN: 11-2187/TH
  • ISSN: 0577-6686

Journal of Mechanical Engineering ›› 2026, Vol. 62 ›› Issue (16): 383-391.doi: 10.3901/JME.260718

Previous Articles    

Machine Vision-based Method for Detecting the Working Clearance of Lateral Bumpstops of Railway Vehicles

ZHOU Yichang1, PENG Chen1, WANG Kaiyun2, CHEN Jiyong3, LING Liang2, QIU Zhiheng1, REN Zunsong1   

  1. 1. School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University, Beijing 100044;
    2. State Key Laboratory of Rail Transit Vehicle System, Southwest Jiaotong University, Chengdu 610031;
    3. CRRC Datong Electric Locomotive Co., Ltd., Datong 037038
  • Received:2025-08-13 Revised:2026-03-07 Published:2026-10-14

Abstract: The secondary lateral bumpstop is a key component that limits the lateral relative displacement between the car-body and the bogie in railway vehicles. However, due to restricted installation space and frequent variations in working clearance, no effective method currently exists for monitoring its operational status. A machine vision-based approach for detecting the working clearance of the secondary lateral stop is introduced when a locomotive is taken as the interested object. The method involves image acquisition, image enhancement, edge detection, and probabilistic Hough transform, and the effects of key parameters in edge detection and Hough transform, such as high, low and accumulator thresholds, on detection accuracy are systematically analyzed. Experimental results demonstrate that the proposed method can effectively monitor the operational status of the secondary lateral stop, with detection errors within 10% compared to measurements obtained from a cable displacement sensor. It provides a novel approach for the long-term online monitoring of the working clearance of lateral bumpstops.

Key words: railway vehicles, lateral bumpstop, machine vision, working clearance, edge detection

CLC Number: